WorldCat Identities

TRW Space Technology Laboratories

Overview
Works: 150 works in 183 publications in 1 language and 468 library holdings
Genres: Periodicals  Bibliography 
Classifications: TL787, 629.405
Publication Timeline
.
Most widely held works about TRW Space Technology Laboratories
 
Most widely held works by TRW Space Technology Laboratories
Space log( )

in English and held by 89 WorldCat member libraries worldwide

Selections from the TRW Space Technology Laboratories lecture series by TRW Space Technology Laboratories( )

in English and held by 23 WorldCat member libraries worldwide

A study of model matching techniques for the determination of parameters in human pilot models by George A Bekey( Book )

2 editions published in 1965 in English and held by 22 WorldCat member libraries worldwide

Research on ion transport across microbial membranes by Bernard H Goldner( Book )

2 editions published in 1966 in English and held by 21 WorldCat member libraries worldwide

Effects of low energy protons and high energy electrons on silicon by J. R Carter( Book )

1 edition published in 1966 in English and held by 17 WorldCat member libraries worldwide

Improved analytic longitudinal response analysis for axisymmetric launch vehicles by J. S Archer( Book )

2 editions published in 1965 in English and held by 16 WorldCat member libraries worldwide

Particle parameter selection system for an electrostatic particle accelerator by J. F Friichtenicht( Book )

1 edition published in 1965 in English and held by 16 WorldCat member libraries worldwide

Masers and lasers : a bibliography by John F Price( Book )

2 editions published in 1962 in English and held by 15 WorldCat member libraries worldwide

Feasibility study and design of passive dampers for a manned rotating space station by Engineering Mechanics Laboratory( Book )

2 editions published in 1965 in English and held by 14 WorldCat member libraries worldwide

A study of manual control methodology with annotated bibliography by L. G Summers( Book )

2 editions published in 1964 in English and held by 11 WorldCat member libraries worldwide

Exobiology: a bibliography by L. R Magnolia( Book )

1 edition published in 1964 in English and held by 11 WorldCat member libraries worldwide

LSI Correlator( Book )

10 editions published between 1969 and 1972 in English and held by 10 WorldCat member libraries worldwide

The epitaxial, Schottky clamped cermet film, multi-level metal (64 BC II) correlator and the triple diffused resistor, single level metal (64 BC III) correlator both meet the specifications. The 64 BC III has exhibited superior yields and is therefore the best candidate for further fabrication. For applications involving data rates of 20-30 MHz or lower, the triple diffusion technology would offer the highest yield and probably the best choice. For data rates above 20-30 MHz the epitaxial technology is the best choice. (The maximum data rate of the triple diffused structure may increase in time; however, it is presently viewed that the epitaxial structure will continue to offer a higher data rate capability due to the relative device performance.)
A study of manual control methodology by TRW Space Technology Laboratories( Book )

2 editions published in 1964 in English and held by 7 WorldCat member libraries worldwide

Selections from the TRW Space Technology Laboratories Lecture Series, vol. 2, 1965 by TRW Space Technology Laboratories( Book )

1 edition published in 1965 in English and held by 6 WorldCat member libraries worldwide

Shock spectrum measurements by Frank W Galbraith( Book )

2 editions published between 1965 and 1970 in English and held by 5 WorldCat member libraries worldwide

A total of twelve reed gages were installed to measure displacement shock spectre resulting from Project Gnome underground nuclear explosion
Environmental research satellites for space propulsion systems experiments( Book )

3 editions published in 1966 in English and held by 3 WorldCat member libraries worldwide

The development, fabrication, test, and delivery of Environmental Research Satellites for in-space propulsion systems experiments are reported. Two spacecraft will be built for the friction experiment and two spacecraft for the zero g heat transfer experiment. The first units of each experiment will be designated the prototypes. The flight units will be launched as subsatellites from a primary launch mission. The friction experiment is concerned with the broadening of knowledge with surface friction in the space environment. The experiment can contribute to our understanding of surface friction processes in the combined environment of space vacuum and radiation. The zero g heat transfer experiment is concerned with the influence of change of gravitational acceleration on heat transfer coefficient in the various transfer regimes and heating rates at which transitions between these regimes occur. The low g heat transfer data obtained may be applied in the design of systems involving heat transfer to volumes of fluid as typically occurs in tankage
Fireball Entrainment Study( Book )

3 editions published between 1972 and 1973 in English and held by 3 WorldCat member libraries worldwide

An experimental program to study the process of entrainment and turbulent mixing in fireballs is described. The high pressure test facility and diagnostic equipment which were developed for this investigation and preliminary analyses which have been performed are discussed. Methods of acquiring density and velocity field data using holographic interferometry and particle tracking techniques, respectively, as well as the interpretation and reduction of these data are outlined. Preliminary experimental results obtained at tank pressures of four and eight atmospheres are presented. (Author)
Selections for the TRW Space Technology Laboratories lecture series by TRW Space Technology Laboratories( )

in English and held by 3 WorldCat member libraries worldwide

Feasibility demonstration of a rocket engine ablation gauge( Book )

3 editions published between 1966 and 1967 in English and held by 2 WorldCat member libraries worldwide

The program objective is to demonstrate the feasibility of dynamically measuring ablation and erosion of rocket nozzle liner materials and includes analytical studies to establish design parameters, laboratory experiments to evaluate test variables, and five rocket engine tests of the measurement technique. During the Task I phase, the following major efforts were completed: (1) Radiochemicals were selected to be used as trace additives in 'needles' used to measure erosion and ablation of rocket liner materials. The additives were 95ZrO2 or 46Sc2O3 as the erosion radiochemicals and 203HgCl2 or 113SnCl2 as the ablation radiochemicals. (2) A system analysis was performed to provide guidance in the system design and source selection. Relationships were derived to determine measurement sensitivity as a function of source gamma energy and needle length. The analysis showed that a source strength of 0.4 to 1.0 millicurie is required for each additive in the needle to provide a 1% count rate accuracy. Adjacent sources were found to contribute less than 1% of the detected count rate and therefore will not cause significant interference. (3) Necessary hardware and fixtures were designed to mount six radiation detectors at the periphery of a 5K engine nozzle. Two detectors can be positioned as close together as 2-7/8 inches (detector centerline measurement), while axial locations can be varied from 1/2 inch upstream from the nozzle throat to the exit of the nozzle. (Author)
Development of Autoclave Moldable Addition-Type Polyimides( )

3 editions published between 1974 and 1976 in English and held by 0 WorldCat member libraries worldwide

Two highly promising approaches to yield autoclavable addition-type polyimides were identified and evaluated in the program. Conditions were established for autoclave preparation of Hercules HMS graphite fiber reinforced composites in the temperature range of 473 deg K (390 deg F) to 505 deg K (450 deg F) under an applied pressure of 0.7 MN/sq m (100 psi) for time durations up to four hours. Upon oven postcure in air at 589 deg K (600 deg K), composite samples demonstrated high mechanical property retention at 561 deg K (550 deg F) after isothermal aging in air for 1000 hours. Promise was shown for shorter term mechanical property retention at 589 deg K upon exposure in air at this temperature. jg p2
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.70 (from 0.33 for Case study ... to 1.00 for LSI Correl ...)

Alternative Names

controlled identitySpace Technology Laboratories, inc.

controlled identityTRW Systems Group

Space Technology Laboratories

Thompson Ramo Wooldridge, inc. TRW Space Technology Laboratories

TRW Inc. Space Technology Laboratories

TRW Inc. TRW Space Technology Laboratories

TRW Inc. TRW Systems Group

TRW Space Technology Laboratories

TRW Systems

Languages
English (49)