WorldCat Identities

Massachusetts Institute of Technology Department of Mechanical Engineering

Overview
Works: 1,577 works in 1,677 publications in 1 language and 3,875 library holdings
Genres: Conference proceedings 
Roles: Researcher, Funder
Classifications: TA350, 620.105
Publication Timeline
Key
Publications about Massachusetts Institute of Technology Publications about Massachusetts Institute of Technology
Publications by Massachusetts Institute of Technology Publications by Massachusetts Institute of Technology
Most widely held works about Massachusetts Institute of Technology
 
moreShow More Titles
fewerShow Fewer Titles
Most widely held works by Massachusetts Institute of Technology
An introduction to the mechanics of solids by Massachusetts Institute of Technology ( Book )
13 editions published between 1957 and 1978 in English and held by 700 WorldCat member libraries worldwide
Operation of automated guideway transit vehicles in dynamically reconfigured trains and platoons (extended summary) by S Shladover ( Book )
2 editions published in 1979 in English and held by 82 WorldCat member libraries worldwide
Prediction and mitigation of erosive-corrosive wear in secondary piping systems of nuclear power plants by R. G Keck ( Book )
5 editions published in 1987 in English and held by 79 WorldCat member libraries worldwide
Ultrasonic input-output for transmitting and receiving longitudinal transducers coupled to same face of isotropic elastic plate by James H Williams ( Book )
3 editions published in 1982 in English and held by 74 WorldCat member libraries worldwide
Elevated guideway cost-ride quality studies for group rapid transit systems ( Book )
3 editions published in 1977 in English and held by 70 WorldCat member libraries worldwide
Ultrasonic and mechanical characterizations of fatigue states of graphite epoxy composite laminates by Hursit Yuce ( Book )
2 editions published in 1982 in English and held by 69 WorldCat member libraries worldwide
Fiber reinforced composites are inherently nonhomogeneous materials in which fabrication procedures can affect their service reliability without effect on their visual appearance. Williams and Doll observed in a unidirectional graphite fiber epoxy composite that a small change (14 deg c) in the precure temperature resulted in significant changes in trans fiber compressive fracture strength and the transfiber compression-compression fatigue life. Because (for some modes of) fatigue the failure of graphite fiber composites tends to be sudden and occurs without any visible evidence of damage any means of nondestructively monitoring fatigue damage or predicting fatigue behavior of graphite fiber composites is likely to enhance their effective use. In the investigation conducted by Williams and Doll they observed that the ultrasonic attenuation of the composite in the as fabricated state can be an indicator of the composite fatigue life. The purpose of the present study is to further explore the relationship between ultrasonic attenuation and fatigue survivability of graphite fiber epoxy composites fabricated under various processing temperatures and pressures
Parameterized materials and dynamic response characterizations in unidirectional composites by James H Williams ( Book )
1 edition published in 1986 in English and held by 68 WorldCat member libraries worldwide
The values 0f phase velocities of ultrasonic waves in transversely isotropic media are presented in terms of (a) the fiber volume fraction 0f a unidirectional fiberglass epoxy composite with constant matrix properties and (b) the ratio between extensional moduli in the longitudinal and transverse directions of the composite when the properties of the fibers are changed, at a constant fiber volume fraction. The model of a homogeneous transversely isotropic medium is adopted to describe the relations between elastic properties and velocities. The displacements due to an oscillatory point source in an infinite medium are used as one measure of comparison of the behavior of the unidirectional composite according to the variations of the parameters, as described above. Values of phase velocities, elastic moduli, Poisson's ratios and displacements due to a point source can be read from the parameterized plots for a known fiber volume fraction or a known ratio between extensional moduli of the composite
Strain gage techniques: fundamentals (July 16-20, 1956), applications (July 23-27, 1956) by William M Murray ( Book )
2 editions published between 1956 and 1958 in English and held by 67 WorldCat member libraries worldwide
Performance limits of rail passenger vehicles : conventional, radial, and innovative trucks ( Book )
3 editions published in 1982 in English and held by 65 WorldCat member libraries worldwide
Ultrasonic attenuation of a void-containing medium for very long wavelengths by James H Williams ( Book )
2 editions published in 1983 in English and held by 62 WorldCat member libraries worldwide
The application of active and passive suspension techniques to improve high speed ground vehicle performance ( Book )
1 edition published in 1983 in English and held by 53 WorldCat member libraries worldwide
Development and evaluation of thermic diode solar panels for building heating and cooling : final report for period Nov. 1, 1975 to Oct. 31, 1977 by S Buckley ( Book )
3 editions published in 1978 in English and held by 48 WorldCat member libraries worldwide
Fluid-structure interactions in pressure-suppression pools : small-scale experiments by P. W Huber ( Book )
2 editions published in 1979 in English and held by 35 WorldCat member libraries worldwide
Rationale for a perturbation method for analyzing fluid-structure interactions in BWR pressure-suppression containment systems by Paul W Huber ( Book )
2 editions published in 1980 in English and held by 33 WorldCat member libraries worldwide
Proceedings by Conference on CAD/CAM Technology in Mechanical Engineering ( Book )
3 editions published in 1982 in English and held by 33 WorldCat member libraries worldwide
A two-dimensional fluid finite element by Massachusetts Institute of Technology ( Book )
3 editions published in 1978 in English and held by 32 WorldCat member libraries worldwide
Modes of circulation in an inverted u-tube array with condensation by C Calia ( Book )
3 editions published in 1980 in English and held by 32 WorldCat member libraries worldwide
Investigation of distorted-geometry simulation of pool dynamics in horizontal-vent BWR containments by N. G Ruggieri ( Book )
2 editions published in 1980 in English and held by 32 WorldCat member libraries worldwide
Gravity reflood oscillations in a pressurized water reactor by Y. L Cheung ( Book )
2 editions published in 1980 in English and held by 31 WorldCat member libraries worldwide
Upper plenum dump during reflood by Yukio Sudo ( Book )
2 editions published in 1980 in English and held by 30 WorldCat member libraries worldwide
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.83 (from 0.00 for Letter to ... to 1.00 for Annual rep ...)
Alternative Names

controlled identity Massachusetts Institute of Technology

controlled identity Massachusetts Institute of Technology. Department of Naval Architecture and Marine Engineering

M.I.T.. Department of mechanical engineering
Massachusetts Institute of Technology. Dept. of Mechanical Engineering
Massachusetts Institute of Technology Mechanical Engineering Department
Languages
English (79)