WorldCat Identities

Green, Martin A.

Overview
Works: 32 works in 104 publications in 4 languages and 3,647 library holdings
Roles: Author, Editor, Opponent, Other, Thesis advisor
Publication Timeline
.
Most widely held works by Martin A Green
Solar cells : operating principles, technology, and system applications by Martin A Green( Book )

21 editions published between 1982 and 2010 in English and Chinese and held by 657 WorldCat member libraries worldwide

Power to the people : sunlight to electricity using solar cells by Martin A Green( Book )

9 editions published in 2000 in English and Undetermined and held by 316 WorldCat member libraries worldwide

"Martin Green traces the history of the development of photovoltaics, charts the current research priorities, and shows how solar energy is being tapped in a variety of innovative cases. He highlights how solar power can be used in domestic homes and in offices and factories, and how its full potential can be achieved in the future. He also describes the key role solar technologs can play in lifting living standards in Third World countries."--Jacket
High efficiency silicon solar cells( Book )

7 editions published in 1987 in English and held by 120 WorldCat member libraries worldwide

Applied photovoltaics by S. R Wenham( Book )

14 editions published between 1994 and 2013 in English and Chinese and held by 113 WorldCat member libraries worldwide

The new edition of this thoroughly considered textbook provides a reliable, accessible and comprehensive guide for students of photovoltaic applications and renewable energy engineering. Written by a group of award-winning authors it is brimming with information and is carefully designed to meet the needs of its readers. Along with exercises and references at the end of each chapter, it features a set of detailed technical appendices that provide essential equations, data sources and standards. The new edition has been fully updated with the latest information on photovoltaic cells
Clean electricity from photovoltaics by Mary D Archer( Book )

10 editions published between 2014 and 2015 in English and held by 65 WorldCat member libraries worldwide

The second edition of Clean Electricity from Photovoltaics, first published in 2001, provides an updated account of the underlying science, technology and market prospects for photovoltaics. All areas have advanced considerably in the decade since the first edition was published, which include: multi-crystalline silicon cell efficiencies having made impressive advances, thin-film CdTe cells having established a decisive market presence, and organic photovoltaics holding out the prospect of economical large-scale power production
Silicon solar cells : advanced principles & practice by Martin A Green( Book )

6 editions published in 1995 in English and held by 55 WorldCat member libraries worldwide

Tai yang dian chi gong zuo yuan li, ji shu yu xi tong ying yong by Gelin( Book )

1 edition published in 2009 in Chinese and held by 21 WorldCat member libraries worldwide

Energía fotovoltaica : de la luz solar a la electricidad usando células solares by Martin A Green( Book )

4 editions published in 2002 in Spanish and held by 16 WorldCat member libraries worldwide

Thermal behavior of photovoltaic devices : physics and engineering by Olivier Dupré( Book )

4 editions published in 2017 in English and held by 12 WorldCat member libraries worldwide

This book provides a comprehensive introduction to the thermal issues in photovoltaics. It also offers an extensive overview of the physics involved and insights into possible thermal optimizations of the different photovoltaic device technologies. In general, temperature negatively affects the efficiency of photovoltaic devices. The first chapter describes the temperature-induced losses in photovoltaic devices and reviews the strategies to overcome them. The second chapter introduces the concept of temperature coefficient, the underlying physics and some guidelines for reducing their negative impacts. Subsequent chapters offer a comprehensive and general thermal model of photovoltaic devices, and review how current and emerging technologies, mainly solar cells but also thermophotovoltaic devices, can benefit from thermal optimizations. Throughout the book, the authors argue that the energy yield of photovoltaic devices can be optimized by taking their thermal behavior and operating conditions into consideration in their design
Thin film silicon solar cells by Martin A Green( Book )

1 edition published in 1996 in English and held by 10 WorldCat member libraries worldwide

Renewable energy in society( Book )

3 editions published in 2011 in English and held by 4 WorldCat member libraries worldwide

Silicon solar cells with integrated bypass diode, April 1982( Book )

1 edition published in 1982 in English and held by 3 WorldCat member libraries worldwide

Physical, chemical, and electrical studies of silicon MIS solar cells by Martin A Green( Book )

1 edition published in 1981 in English and held by 3 WorldCat member libraries worldwide

The objective of this report is to investigate the physical and chemical structure, as well as the electronic properties, of high-performance silicon MIS (metal/insulator/semiconductor) solar cells
Earthmounding : an assessment as a noise reducing technique by Martin A Green( Book )

1 edition published in 1980 in English and held by 2 WorldCat member libraries worldwide

Renewable energy origins and flows( Book )

2 editions published in 2011 in English and held by 2 WorldCat member libraries worldwide

Two-dimensional numerical optimisation study of the rear contact geometry of high-efficiency silicon solar cells by Armin G Aberle( Book )

1 edition published in 1993 in English and held by 2 WorldCat member libraries worldwide

Abstract: "Under one-sun illumination, the highest energy conversion efficiencies of silicon solar cells are presently obtained with bifacially contacted n+p cells, where contact to the p-type substrate is made via small openings in the rear passivating oxide. In this work, a state-of-the-art 2-dimensional (2D) semi-conductor device simulator is applied to these devices in order to investigate the effects arising from the rear metallisation scheme. The impact of various cell parameters (i.e. substrate resistivity, rear surface recombination model (flatband or surface band bending conditions), positive oxide charge density, capture cross section ratio) on the cell's current-voltage (I-V) characteristics and the optimum rear contact spacing is investigated. For the first time the experimentally observed highly non-ideal I-V curves of rear point- contacted high-efficiency silicon solar cells made at the University of New South Wales (UNSW) have been modelled with a high degree of accuracy. This is achieved by properly accounting for the complex recombination behaviour at the rear oxidised surface. The 2D simulations show that the non-ideal I-V curves result from the unequal capture cross sections of electrons and holes at the rear Si-SiO2 interface and the surface band bending induced by positive oxide charges and metal/silicon work function differences. For the UNSW cells, optimum one-sun efficiency is obtained on 2 Ohm cm substrates and rear contact spacings of 0.2-0.3 mm. The 2d simulations presented in this work clearly confirm the experimental findings and reveal the physical mechanisms which favour this particular contact design."
Solceller : från solljus till elektricitet by Martin A Green( Book )

1 edition published in 2002 in Swedish and held by 2 WorldCat member libraries worldwide

Numerical analysis of semiconductor junction devices by Martin A Green( Book )

2 editions published in 1971 in English and held by 2 WorldCat member libraries worldwide

Renewable energy( Book )

2 editions published in 2011 in English and held by 2 WorldCat member libraries worldwide

PV 2000 - and beyond( Book )

1 edition published in 2000 in English and held by 1 WorldCat member library worldwide

 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.37 (from 0.02 for Power to t ... to 0.96 for Renewable ...)

Power to the people : sunlight to electricity using solar cells
Alternative Names
Green, M.

Green, M. A.

Green, M. A., 1948-

Green, M. (Martin)

Green, Martin

Martin Green Australian scientist

Martin Green ingénieur et professeur australien

Martin Green ingenieur uit Australië

마틴 그린

Languages
Covers
Renewable energy in societyRenewable energy origins and flowsRenewable energy