WorldCat Identities

Semiatin, S. L.

Overview
Works: 52 works in 157 publications in 1 language and 3,129 library holdings
Genres: Handbooks and manuals  Conference papers and proceedings 
Roles: Author, Editor, Other
Classifications: TA460, 671
Publication Timeline
.
Most widely held works by S. L Semiatin
Elements of induction heating : design, control, and applications by S Zinn( Book )

22 editions published between 1987 and 1995 in English and Undetermined and held by 218 WorldCat member libraries worldwide

Formability and workability of metals : plastic instability and flow localization by S. L Semiatin( Book )

9 editions published in 1984 in English and held by 201 WorldCat member libraries worldwide

Induction heat treatment of steel by S. L Semiatin( Book )

9 editions published in 1986 in English and held by 191 WorldCat member libraries worldwide

Forging handbook( Book )

3 editions published in 1985 in English and held by 190 WorldCat member libraries worldwide

Forming and forging by ASM International( Book )

7 editions published between 1988 and 1998 in English and held by 112 WorldCat member libraries worldwide

Handbook of workability and process design( Book )

8 editions published in 2003 in English and held by 93 WorldCat member libraries worldwide

Physical modeling of metalworking processes : proceedings of a symposium sponsored by the TMS-AIME Shaping and Forming Committee and held at the TMS Annual Meeting in Denver, Colorado, February 24-27, 1987 by Colo.) Symposium on Physical Modeling of Metalworking Processes$ (1987 : Denver( Book )

6 editions published in 1987 in English and held by 70 WorldCat member libraries worldwide

Metals process simulation by ASM International( Book )

6 editions published in 2010 in English and held by 47 WorldCat member libraries worldwide

This Handbook provides insight into the integration of modeling for simulation of manufacturing processing. The metals industry is moving toward an integrated computational materials engineering approach (ICME). This provides engineers with accurate predictions of material and process behavior to avoid or reduce costly trial-by-error and prototyping methods of development. The table of contents illustrates the depth and breadth of the processes addressed. This area of engineering has been advancing rapidly, accruing the benefits of reduced manufacturing costs and improved component design. This book serves as a reference to these developments
Fundamentals of modeling for metals processing by ASM International( Book )

5 editions published in 2009 in English and held by 44 WorldCat member libraries worldwide

This Handbook provides an overview of the development of models of metallic materials and how the materials are affected by processing. This knowledge is central to understanding of the behavior of existing alloys and the development of new materials that affect nearly every manufacturing industry. Background on fundamental modeling methods provides the user with a solid foundation of the underlying physics that support the mechanistic method of many industrial simulation software packages. The phenomenological method is given equal coverage. The substantial efforts of the past 25 years to develop and implement computer-based models to simulate manufacturing processes, the evolution of microstructures, and the effects on the mechanical properties within component materials are detailed. The rate of change within this area of engineering has continued to increase with increasing industrial benefits from the use of such engineering tools, and the reduced cost and increased speed of computing systems required to perform the extensive model calculations. This book serves as a reference to these developments and the governing principles on which they are based. Leading experts from ten countries have contributed to this effort to provide a comprehensive reference for the modeling practitioner as well as those needing to learn modeling methods
Metals handbook : welding and brazing by American Society for Metals( Book )

6 editions published between 2009 and 2010 in English and held by 11 WorldCat member libraries worldwide

Publisher Provided Annotation
ASM handbook by ASM Handbook Committee( Book )

5 editions published between 2009 and 2010 in English and held by 6 WorldCat member libraries worldwide

Metalworking( Book )

in English and held by 6 WorldCat member libraries worldwide

Induction heating of metals state-of-the-art assessment( Book )

2 editions published in 1985 in Undetermined and English and held by 2 WorldCat member libraries worldwide

Anisotropy of the Hot Plastic Deformation of Ti-6Al-4V Single-Colony Samples (Preprint)( Book )

2 editions published between 2008 and 2009 in English and held by 1 WorldCat member library worldwide

The critical resolved shear stresses and flow curves for the seven possible slip systems in Ti-6Al-4V with a lamellar microstructure were determined via high temperature uniaxial compression testing. For this purpose, samples with a rectangular cross section were cut from single colonies grown using a float-zone technique and then tested at 815 degrees C. Each sample was oriented for single slip along one of seven different slip systems in the alpha phase; i.e., one of the three <1120>{1010} (prism <a>), the three <1120>{0001} (basal <a>), or the <c+a> (pyramidal) systems was activated by orienting specific samples to have the highest Schmid factor on that particular system. Measurements of the critical resolved shear stress (CRSS) at yielding and the subsequent flow behavior revealed a strong dependence of mechanical behavior on colony orientation/activated slip system. The anisotropy in the CRSS and the tendency for flow softening at large strains was rationalized on the basis of the Burgers orientation relationship between the alpha (hcp) lamellae and the beta (bcc) matrix and hence the orientation of alpha slip directions relative to those in the beta phase
Metals Processing/Processing Science. Work Order Directive (WUD) 49( Book )

2 editions published in 2002 in English and held by 1 WorldCat member library worldwide

A wide range of research related to the deformation, solidification, and vapor processing of materials of importance to the Air Force was conducted under this Work Unit Directive. The primary theme of all of the research was to establish the physics of materials behavior during processing and to exploit this knowledge to improve existing processes and develop new processes. The important results are discussed in the following sections on intermetallic alloys, conventional alloys, advanced modeling tools, composite materials/thermal barrier coatings, and novel processes
Ultrafine grained materials II : proceedings of a symposium : held during the 2002 TMS Annual Meeting in Seattle, Washington, February 17-21, 2002 by Y. T Zhu( )

2 editions published between 2002 and 2013 in English and held by 0 WorldCat member libraries worldwide

The Effect of Preheat Temperature and Inter-Pass Reheating on Microstructure and Texture Evolution During Hot Rolling of Ti-6Al-4V (Preprint)( )

2 editions published in 2008 in English and held by 0 WorldCat member libraries worldwide

A high-resolution electron-backscatter-diffraction (EBSD) technique was employed to investigate microstructure evolution during warm working of Ti-6Al-4V with a colony alpha microstructure. Particular emphasis was paid to the specific mechanisms governing this process. Microstructure development was found to be driven mainly by the geometrical requirements of the imposed strain and by the kinking of alpha lamellae. For the most part, the lamellar microstructure was surprisingly stable during straining with limited globularization observed only in kinked alpha colonies. The kinking process was shown to be closely linked with the development of shear bands within the colonies. These observations suggest that changes in strain path may be beneficial in promoting globularization during warm working
Modeling of Microstructure Evolution During the Thermomechanical Processing of Titanium Alloys (Preprint)( )

2 editions published in 2008 in English and held by 0 WorldCat member libraries worldwide

The development of crystallographic texture, the preferred orientation of grains in a polycrystalline aggregate, during thermomechanical processing (TMP) can play an important role with regard to the secondary-forming response (e.g., deep drawing of sheet) and service performance (e.g., strength, elastic modulus, ductility, fracture toughness) of metallic materials. Crystallographic texture, or simply texture for succinctness, may arise as a result of large-strain deformation, dynamic/static recrystallization, grain growth, or phase transformation. A second form of anisotropy, mechanical texturing or mechanical fibering, refers to the alignment of microstructure, inclusions, etc., during deformation processes and may also affect mechanical properties such as ductility and fracture toughness. This latter form of texture is not discussed in the present article
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.44 (from 0.04 for Elements o ... to 1.00 for Anisotropy ...)

Handbook of workability and process design
Alternative Names
Semiatin, Lee

Semiatin, S. L.

Semiatin, S. Lee

Semiatin, Sheldon Lee

Languages
English (97)

Covers
Metals process simulationFundamentals of modeling for metals processingMetals handbook : welding and brazingASM handbookMetalworking