WorldCat Identities

Anderson, William J.

Overview
Works: 17 works in 37 publications in 1 language and 408 library holdings
Genres: Study guides  Personal narratives‡vAmerican 
Roles: Author
Classifications: QA76.3, 005.44769
Publication Timeline
.
Most widely held works by William J Anderson
Review and critical analysis--rolling-element bearings for system life and reliability by Arthur S Irwin( Book )

2 editions published in 1985 in English and held by 72 WorldCat member libraries worldwide

TestPrep MCSE( Book )

1 edition published in 1999 in English and held by 22 WorldCat member libraries worldwide

Fatigue life of 120-mm bore ball bearings at 600 ̊F with fluorocarbon, polyphenyl ether, and synthetic paraffinic base lubricants by Eric N Bamberger( Book )

3 editions published in 1968 in English and held by 14 WorldCat member libraries worldwide

Operation of hydrodynamic journal bearings in sodium at temperatures to 800° F and speeds to 12,000 RPM by Fredrick T Schuller( Book )

3 editions published in 1967 in English and held by 13 WorldCat member libraries worldwide

Arched-outer-race ball-bearing analysis considering centrifugal forces by Bernard J Hamrock( Book )

4 editions published in 1972 in English and held by 10 WorldCat member libraries worldwide

A first-order thrust load analysis that considers centrifugal forces but which neglects gyroscopics, elastohydrodynamics, and thermal effects was performed. The analysis was applied to a 150-mm-bore angular-contact ball bearing. Fatigue life, contact loads, and contact angles are shown for conventional and arched bearings. The results indicate that an arched bearing is highly desirable for high-speed applications. In particular, at an applied load of 4448 n (1000 lb) and a DN value of 3 million (20,000 rpm) the arched bearing shows an improvement in life of 306 percent over that of a conventional bearing
Experiments on the stability of water lubricated herringbone-groove journal bearings by Fredrick T Schuller( Book )

1 edition published in 1968 in English and held by 10 WorldCat member libraries worldwide

Incompressibly lubricated rayleigh step journal bearing. zero-order perturbation solution by Bernard J Hamrock( Book )

2 editions published in 1968 in English and held by 10 WorldCat member libraries worldwide

Preliminary determinations of temperature limitations of ester, ether, and hydrocarbon base lubricants in 25-mm bore ball bearings by Erwin V Zaretsky( Book )

3 editions published in 1967 in English and held by 10 WorldCat member libraries worldwide

Test prep MCSE : Core exams( Book )

1 edition published in 1999 in English and held by 7 WorldCat member libraries worldwide

Comparison of operating characteristics of four experimental and two conventional 75-millimeter-bore cylindrical-roller bearings at high speeds by William J Anderson( Book )

4 editions published in 1953 in English and held by 7 WorldCat member libraries worldwide

An investigation of four experimental and two conventional 75-millimeter-bore (size 215) cylindrical-roller bearings was conducted over a range of DN values (product of bearing bore in mm and shaft speed in rpm) from 300,000 to 2,300,000, radial loads from 7 to 1613 pounds, and oil flows from 2 to 8 pounds per minute with a single-jet circulatory oil feed. The four experimental bearings were equipped with outer-race-riding cages and inner-race-guided rollers. One conventional bearing was equipped with an outer-race-riding cage and outer-race-guided rollers, while the second conventional bearings was equipped with an inner-race-riding cage and inner-race-guided rollers. Each of the six test bearings was equipped with a different design cage made of nodular iron
Experiments on rotating externally pressurized, air journal bearings by Robert E Cunningham( Book )

2 editions published in 1969 in English and held by 5 WorldCat member libraries worldwide

Investigation of 75-millimeter-bore deep-groove ball bearings under radial load at high speeds. 1 - Oil-flow studies by Zolton N Nemeth( Book )

2 editions published in 1952 in English and held by 5 WorldCat member libraries worldwide

At an oil inlet temperature of 100 degrees F, two methods of bearing lubrication, single jet and puddling, were investigated. In this investigation, 75-millimeter-bore ball bearings were studied over a range of DN values (bore times speed) from 300,000 to 1,200,000, radial loads from 7 to 1113 ounds, and oil flows from 2 to 8 pounds per minute. The quantity of oil which flows through the bearing is shown to have an important effect on bearing operating temperatures and lubrication-system heat load. The effects of the operating variables on the oil flow through the bearing and upon the bearing outer- and inner-race temperatures are discussed
Effect of bronze and nodular iron cage materials on cage slip and other performance characteristics of 75-millimeter-bore cylindrical-roller bearings at DN values to 2,000,000 by William J Anderson( Book )

3 editions published in 1953 in English and held by 5 WorldCat member libraries worldwide

An experimental investigation to determine the relative merits of bronze and nodular iron as cage materials for cylindrical-roller bearings was conducted using four identical 75-millimeter-bore outer-race-riding cage-type cylindrical-roller bearings (tow with bronze cages and two with nodular iron cages). The test bearings were operated over a range of DN values (product of bearing bore in mm and shaft speed in rpm) from 300,00 to 2,100,000, oil flows from 2 to 8 pounds per minute, and loads from 7 to 1613 pounds
Profitability of the medical malpractice and general liability lines of insurance : statement of William J. Anderson by William J Anderson( Book )

2 editions published in 1987 in English and held by 4 WorldCat member libraries worldwide

Investigation of 75-millimeter-bore deep-groove ball bearings under radial load at high speeds. 2 - Oil inlet temperature, viscosity, and generalized cooling correlation. by Zolton N Nemeth( Book )

2 editions published in 1953 in English and held by 4 WorldCat member libraries worldwide

Two 75-millimeter-bore(size 215) inner-race-riding cage-type ball bearings were used in an experimental investigation of the effects of oil inlet temperature and viscosity on bearing operating characteristics over a range of DN values (bearing bore in mm times shaft speed in rpm) from 300,000 to 2,400,000, static radial loads from 7 to 1113 pounds, oil flows from 1.6 to 8 pounds per minute, and oil inlet temperatures of 100 to 205 degrees F. Absolute viscosity at the inlet temperatures varied from 21,800,000 to 42,600,000 reyns (kinematic viscosities of 1.77 to 34.5 centistokes)
Battlefield Doc : memoirs of a Korean War combat medic by William J Anderson( Book )

1 edition published in 2015 in English and held by 3 WorldCat member libraries worldwide

"War is hell! Bullets flying, explosions turning night into day, the enemy charging in overwhelming waves. When soldiers are wounded in battle their first cries are for "Doc," the Army medics or Navy corpsmen first responders trained to handle almost anything but surgery. William "Doc" Anderson was a medic on the front lines during the Korean War. What was it like saving and losing lives, and how was it for the soldier on the ground battling not only a relentless enemy but blazing hot summers, below-zero winters, and monsoon rain and mud. Doc writes not about history or politics or strategy, but about real experiences, the humanity and inhumanity of war, what combat veterans wish they could forget and what everyone else should know and remember. North Korea's continuing threats remind us that "The Forgotten War" has never really ended." -- back cover of the book
Elementary stochastic processes by William J Anderson( Book )

1 edition published in 2011 in English and held by 1 WorldCat member library worldwide

 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.62 (from 0.27 for Battlefiel ... to 0.87 for Effect of ...)

TestPrep MCSE
Languages
English (37)

Covers
Test prep MCSE : Core exams