WorldCat Identities

Stewart, Maurice

Overview
Works: 30 works in 226 publications in 1 language and 6,650 library holdings
Genres: Handbooks, manuals, etc 
Roles: Author, Editor
Classifications: TN871.5, 665.5
Publication Timeline
Key
Publications about  Maurice Stewart Publications about Maurice Stewart
Publications by  Maurice Stewart Publications by Maurice Stewart
Most widely held works by Maurice Stewart
Surface production operations by Ken Arnold ( )
47 editions published between 1986 and 2014 in English and Undetermined and held by 1,828 WorldCat member libraries worldwide
In this new edition, experts Arnold and Stewart share their many years of in-the-field and class-room experience. Each chapter has been updated with the latest industry information. You will find new sections on: * Oil-and-water separation * Offshore-platform considerations * Factors affecting oil-and-gas separation * Potential operating problems * Scrubbers * Re-entrainment * Drain systems * Hydrocyclones * Multiphase pumps * Reciprocating pump operations * Water droplet size New figures, photos, charts, and tables consolidate hours of details into at-a-glance illustrations. Example problems accompany the update text. With this volumes clear presentation, you will understand the basic concepts and techniques needed to DESIGN, SPECIFY, and OPERATE oilfield surface production facilities. This manual carefully describes the equipment and processes commonly used in oil-water separating and treating systems. It also shows you how to select the appropriate piping and pumping systems. The authors insights and practical suggestions help you understand the art and science of handling produced liquids. With this reference in hand, you can organize the project with a better grasp of the complex parameters needed to design and operate an efficient production facility
Gas-liquid and liquid-liquid separators by Maurice Stewart ( )
27 editions published between 2008 and 2009 in English and held by 712 WorldCat member libraries worldwide
"Complying with environmental regulations, reducing weight and size and making the most of existing equipment and systems are three of the most vital challenges facing engineers and operators today. Written by experts, Maurice Stewart and Ken Arnold, who share their many years of practical hands-on and teaching experience, Gas-Liquid and Liquid-Liquid Separators helps you develop an expertise in selecting, specifying, designing, operating, troubleshooting and maintaining separator equipment. Packed with hundreds of figures, tables, charts and easy-to-use equations, this practical guide assists in the understanding of the uncertainties and assumptions inherent in operating the equipment and provides the tools required to prevent or solve everyday operational problems."--BOOK JACKET
Emulsions and oil treating equipment selection, sizing and troubleshooting by Maurice Stewart ( )
22 editions published between 2008 and 2009 in English and held by 627 WorldCat member libraries worldwide
The problem of removing water which is emulsified with produced oil has grown more widespread and often times more difficult as producers attempt to access more difficult reserves. This practical guide is designed to help engineers and operators develop a "feel" for selection, sizing, and troubleshooting emulsion equipment. These skills are of vital importance to ensure low operating costs and to meet crude export quality specifications. The book is written for engineers and operators, who need advanced knowledge of the numerous techniques and the equipment used to destabilize and resolve petroleum emulsions problems. In Emulsions and Oil Treating Equipment: Selection, Sizing and Troubleshooting the author provides engineers and operators with a guide to understanding emulsion theory, methods and equipment, and practical design of a treating system. Comprehensive in its scope, the author explains methods such as: demulsifiers, temperature, electrostatics and non-traditional methods of modulated or pulsed voltage control, as well as equipment such as: electrostatic treater (dehydrator), separator, gunbarr heater-treater and free water knockout. Written in a "how to" format, it brings together hundreds of methods, handy formulas, diagrams and tables in one convenient book. Detailed coverage emulsion equipment and removal methods Tips for selecting, sizing, and operating emulsion equipment Overview of emulsion theory and factors affecting treatment methods Packed with equipment diagrams, worked out calculations covers equipment and removal methods
Gas dehydration field manual by Maurice Stewart ( )
17 editions published between 2010 and 2011 in English and held by 547 WorldCat member libraries worldwide
Raw natural gas typically contains a substantial amount of water, which can degrade heating value and contribute to the formation of corrosion in piping and other equipment. Under certain conditions, natural gas hydrates can form, which can cause pipe blockages. Although dehydration historically has been a fairly inexpensive step in the upgrading of natural gas to pipeline quality, costs are increasing. Gas Dehydration Field Manual defines the various methods of gas dehydration and discusses the differences between adsorption and absorption. Designed for engineers, technologists, and operations personnel involved in the design and operation of gas processing facilities, the book starts with an explanation of the terms and theories used throughout the industry. This is followed by clear and rigorous exposition of dehydration processes such as Condensation process, Glycol Regeneration and Molecular Sieves. Exercises appear at the conclusion of each chapter with hints in addition to full solutions. Other topics include hydrate prevention, chemical injection systems, hydrate inhibitor methods. Chapters involving applications cover dehydrate considerations, operation principles, hydrate production correlations and production of operating temperatures and Pressures and glycol maintenance, care and trouble-shooting. An appendix provides the reader with additional exercises and solutions. Engineers and process designers will find this text a valuable guide to gas dehydration processes and equipment, both in terms of its application to efficient and cost effective operations. It will prove particularly useful to readers who want a "quick reference" guide to field operations and procedures as well as those readers who wish to increase their knowledge of best practices. Include hydrate prevention, chemical injection systems, hydrate inhibitor methods Condensation process, Glycol Regeneration and Molecular Sieves An appendix provides the reader with additional exercises and solutions
Gas sweetening and processing field manual by Maurice Stewart ( )
15 editions published between 2010 and 2011 in English and held by 547 WorldCat member libraries worldwide
Although the processing of natural gas is in many respects less complicated than the processing and refining of crude oil, it is equally as necessary before its use by end users. The actual process used to separate oil from natural gas, as well as the equipment that is used, can vary widely. Gas Sweetening and Processing Field Manual provides engineers with the ability to understand and select the most efficient and cost effective method to fit their individual needs. Designed for engineers, technologists, and operations personnel involved in the design and operation of gas processing facilities, the book starts with an explanation of the terms and theories used throughout the industry. This is followed by clear and rigorous exposition of sweetness processes such as Solid Bed Adsorption, Chemical Solvents, Physical Solvents, Distillation, and Gas Permeation. Exercises appear at the conclusion of each chapter with hints in addition to full solutions. Other topics include Design Procedure, Design Examples, Problems and Practical Solutions, Value of NGL Components, Liquid Recovery Process, Absorption/Lean Oil Process, Joule-Thomson, Refrigeration and Cryogenic (Expansion Turbine) Plants. Chapters involving applications cover Direct Conversion of H2S to Sulfur, Removal of H<SUB>2</SUB>S to Meet Pipeline Qualities, Removal of CO<SUB>2</SUB> to Meet Pipeline Qualities and Selection Charts. Engineers and process designers will find this text a valuable guide to gas sweetening process and equipment, both in terms of its application to efficient and cost effective operations. It will prove particularly useful to readers who want a "quick reference" guide to field operations and procedures as well as those readers who wish to increase their knowledge of best practices. Rigorous exposition of all natural gas sweetness processes Equipment and process trouble-shooting techniques Tips for diagnosing and solving equipment and process problems Exercises appear at the conclusion of each chapter
Heat exchanger equipment field manual common operating problems and practical solutions by Maurice Stewart ( )
16 editions published between 2012 and 2013 in English and held by 482 WorldCat member libraries worldwide
From upstream to downstream, Heat Exchangers are utilized in every stage of the petroleum value stream. An integral piece of equipment, heat exchangers are among the most confusing and problematic pieces of equipment in the petroleum processing operations. This is especially true for engineers just entering the field or seasoned engineers that must keep up with the latest methods for in-shop and in-service inspection, repair, alteration and re-rating of equipment. Heat Exchanger Equipment Field Manual provides engineers and operators with an easy to understand working manual to the recent developments in heat exchanger technology and in the diagnosis and correction of operating problems. The objective of this book is to provide the reader with sufficient information to make better logical choices in designing and operating the system. Heat Exchanger Equipment Field Manual provides an indispensable means for the determination of possible failures and for the recognition of the optimization potential of the respective heat exchanger. Step-by-step procedure on how to design, perform in-shop and in-field inspections and repairs, perform alterations and re-rate equipment Select the correct heat transfer equipment for a particular applicationApply heat transfer principles to design, select and specify heat transfer equipmentEvaluate the performance of heat transfer equipment and recommend solutions to problemsControl schemes for typical heat transfer equipment application
Surface production operations by Ken Arnold ( )
10 editions published between 1989 and 1999 in English and held by 474 WorldCat member libraries worldwide
This revised edition puts the most current information about gas-handling systems and facilities at your fingertips. The authors channeled their classroom and field experience into this volume, which features many new sections such as: * Heat recovery units * Kinetic inhibitors and anti-agglomerators * Trays and packing for distillation and absorption towers * Compressor valves * Foundation design considerations for reciprocating compressors * Pressure vessel issues and components * Nox reduction in engines and turbines * Safety management systems This book walks you through the equipment and processes used in gas-handling operations to help you design and manage a production facility. Production engineers will keep this volume on the desktop for the latest information on how to DESIGN, SPECIFY, and OPERATE gas-handling systems and facilities. The book allows engineers with little or background in production facility design to easily locate details about equipment, processes, and design parameters. With this volume, you will more completely comprehend the techniques of handling produced fluids from gas wells so your facility can be more efficient and productive. * Revised edition puts the most current information about gas-handling systems at your fingertips * Features brand new sections!
Produced water treatment field manual by Maurice Stewart ( )
14 editions published between 2010 and 2011 in English and held by 332 WorldCat member libraries worldwide
Produced water is mainly salty water trapped in the reservoir rock and brought up along with oil or gas during production. Almost all offshore oilfields produce large quantities of contaminated water that can have significant environmental effects if not handled properly. Over the life of a well, the volume of water produced will exceed the volume of oil by a factor of 3-6 times. Since produced water has no commercial value, operators must find a way to treat relatively large amounts of water at the lowest possible cost. Packed with over 500 tables, figures, and equations, the objective of this book is to provide any one who is involved in the design, operation, maintenance and sizing of produced water treatment systems, with a handy reference to the latest technology, management, treatment, and handling practices. This book will provide readers with the necessary insight to: Present a description of the various water treating equipment that are currently in use Provide performance data for each unit Develop a "feel" for the parameters needed for design and their relative importance Develop and understanding of the uncertainties and assumptions inherent in the design of the various items of equipment Outline sizing procedures and equipment selection The objective of this book is to provide the reader with sufficient information to make better logical choices in designing and operating the system. To a large extent, the design of a system, the sizing of individual pieces of equipment and the operation of the system must be tempered by the experience and judgement of the designer and operator. Present a description of the various water treating equipment that are currently in use Provide performance data for each unit Develop a "feel" for the parameters needed for design and their relative importance Develop and understanding of the uncertainties and assumptions inherent in the design of the various items of equipment Outline sizing procedures and equipment selection
Surface production operations by Ken Arnold ( )
3 editions published in 2008 in English and held by 294 WorldCat member libraries worldwide
Pressure vessels field manual common operating problems and practical solutions by Maurice Stewart ( )
12 editions published between 2012 and 2013 in English and held by 292 WorldCat member libraries worldwide
The majority of the cost-savings for any oil production facility is the prevention of failure in one of the production equipment such as pressure vessels. Money lost through lost production far outweighs expenses associated with maintenance and proper operation. However, many new engineers lack the necessary skills to effectively find and troubleshoot operating problems while experience engineers lack knowledge of the latest codes and standards. The fifth book in the Field Manual Series, the Pressure Vessel Operations Field Manual provides new and experienced engineers with the latest tools
Surface production operations by Maurice Stewart ( )
2 editions published in 2014 in English and held by 162 WorldCat member libraries worldwide
Design of gas-handling systems and facilities by Ken Arnold ( Book )
8 editions published between 1989 and 1999 in English and Undetermined and held by 98 WorldCat member libraries worldwide
This revised edition puts the most current information about gas-handling systems and facilities at your fingertips. The authors channeled their classroom and field experience into this volume, which features many new sections such as:. * Heat recovery un
Design of oil-handling systems and facilities by Ken Arnold ( Book )
12 editions published between 1986 and 1999 in English and Undetermined and held by 62 WorldCat member libraries worldwide
Investigation of October 20-27, 1983 blowout, Eugene Island Block 10, Lease OCS-G 2892 Gulf of Mexico ( Book )
1 edition published in 1985 in English and held by 40 WorldCat member libraries worldwide
Design of gas-handling systems and facilities by Maurice Stewart ( )
1 edition published in 2014 in English and held by 7 WorldCat member libraries worldwide
Surface Production Operations Design of Gas-Handling Systems and Facilities by Ken Arnold ( )
1 edition published in 1999 in English and held by 7 WorldCat member libraries worldwide
This revised edition puts the most current information about gas-handling systems and facilities at your fingertips. The authors channeled their classroom and field experience into this volume, which features many new sections such as:* Heat recovery units* Kinetic inhibitors and anti-agglomerators* Trays and packing for distillation and absorption towers* Compressor valves* Foundation design considerations for reciprocating compressors* Pressure vessel issues and components * Nox reduction in engines and turbines* Safety management systemsThis book
Surface production operations / DESIGN OF OIL HANDLING SYSTEMS AND FACILITIES by Maurice Stewart ( Book )
2 editions published in 2007 in English and held by 7 WorldCat member libraries worldwide
The long awaited revision of this best selling title
Surface production operations by Maurice Stewart ( Book )
1 edition published in 2012 in English and held by 4 WorldCat member libraries worldwide
Surface production operations by Ken Arnold ( )
in English and held by 3 WorldCat member libraries worldwide
This revised edition puts the most current information about gas-handling systems and facilities at your fingertips. The authors channeled their classroom and field experience into this volume, which features many new sections such as: * Heat recovery units * Kinetic inhibitors and anti-agglomerators * Trays and packing for distillation and absorption towers * Compressor valves * Foundation design considerations for reciprocating compressors * Pressure vessel issues and components * Nox reduction in engines and turbines * Safety management systems This book walks you through the equipment and processes used in gas-handling operations to help you design and manage a production facility. Production engineers will keep this volume on the desktop for the latest information on how to DESIGN, SPECIFY, and OPERATE gas-handling systems and facilities. The book allows engineers with little or background in production facility design to easily locate details about equipment, processes, and design parameters. With this volume, you will more completely comprehend the techniques of handling produced fluids from gas wells so your facility can be more efficient and productive. * Revised edition puts the most current information about gas-handling systems at your fingertips * Features brand new sections!
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.67 (from 0.10 for Surface pr ... to 0.92 for Investigat ...)
Languages
English (213)
Covers