WorldCat Identities

Stephens, John J.

Overview
Works: 23 works in 38 publications in 3 languages and 1,218 library holdings
Genres: Conference papers and proceedings  Examinations, questions, etc  Bibliography 
Roles: Author
Classifications: TA483, 620.161
Publication Timeline
.
Most widely held works by John J Stephens
Brazing and soldering : proceedings of the 3rd International Brazing and Soldering Conference : April 24-26, 2006, Crowne Plaza Riverwalk Hotel, San Antonio, Texas, USA by International Brazing and Soldering Conference( Book )

9 editions published in 2006 in English and held by 30 WorldCat member libraries worldwide

Multiple-choice tests in German by Peter Carrington( Book )

3 editions published in 1975 in German and English and held by 5 WorldCat member libraries worldwide

A note on the idealized radar range equation( Book )

1 edition published in 1966 in English and held by 2 WorldCat member libraries worldwide

A complete statement of the idealized radar range equation is shown and compared to the result given by Probert-Jones. (Author)
Estimating refractive index spectra in regions of clear-air turbulence by John J Stephens( Book )

1 edition published in 1966 in English and held by 2 WorldCat member libraries worldwide

Total attenuation, scattering, and absorption cross-sections of water drops for infrared radiation by John J Stephens( Book )

1 edition published in 1961 in English and held by 2 WorldCat member libraries worldwide

A variational approach to numerical weather analysis and prediction : a dissertation by John J Stephens( Book )

1 edition published in 1972 in English and held by 1 WorldCat member library worldwide

Adhesion of thick film Au to alumina ceramics( Book )

1 edition published in 1003 in English and held by 1 WorldCat member library worldwide

Thick film Au metallizations are commonly used as conductors in hybrid microelectronics that operate at high frequencies because of their superior electrical properties. Discrete components are attached to these conductors with 50Pb/50In solder because of its lower "leaching" or dissolution of the gold metallization complared to Pb/Sn solder
Proceedings of the Fourth Switch Tube Advanced Technology Review meeting by Leonard C Beavis( Book )

1 edition published in 1992 in English and held by 1 WorldCat member library worldwide

Radar cross-sections for water and ice spheres by John J Stephens( )

1 edition published in 1960 in English and held by 1 WorldCat member library worldwide

The "practical" method of reducing observed degrees A.P.I. to degrees A.P.I. at 60[degrees] F. by John J Stephens( Book )

1 edition published in 1930 in English and held by 1 WorldCat member library worldwide

My brown-eyed Marie : song and dance by Ashton P Stevens( )

1 edition published in 1894 in English and held by 1 WorldCat member library worldwide

A Multi-Scale Research Program in Tropical Meteorology( Book )

1 edition published in 1970 in English and held by 1 WorldCat member library worldwide

The report summarizes the field observation program on or near Barbados in the summer of 1969, in conjunction with the Barbados oceanographic and meteorological experiment (BOMEX). A preliminary catalog of the data collected is included from the Sub-cloud Instrument Telemetry System, constant level, free-rise balloons and the data taken from towers on Barbados. Three independent investigations are included as appendices: (1) A Note on an Improved Quasi-Lagrangian Advective Scheme for Primitive Equations. (2) Optimum Influence Radii for Interpolation with the Method of Successive Corrections. (3) A Note of Boundary Layer Wind Structure Above Sloping Terrain. (Author)
Severe storms research : final report by John J Stephens( Book )

1 edition published in 1978 in English and held by 1 WorldCat member library worldwide

Materials selection issues for structural components of transportation casks by K. B Sorenson( Book )

1 edition published in 1989 in English and held by 1 WorldCat member library worldwide

A BISTATIC RADAR EXPERIMENT( Book )

1 edition published in 1966 in English and held by 1 WorldCat member library worldwide

The large-angle, Mie scattering characteristics of precipitation volumes are presented for a model drop-size distribution. Tentative signal analysis procedures for a bistatic radar experiment are discussed. (Author)
Total attenuation, scattering, and absorption cross-sections of water drops for infrared radiation( Book )

1 edition published in 1961 in English and held by 1 WorldCat member library worldwide

Total attenuation, scattering, and absorption cross-sections are presented for 35 wavelengths from 4 microns to 90 microns for spherical water drops with diameters from 1.0 microns to 10.0 microns. (Author)
Dis net jy & ander tributes by John J Stephens( Recording )

1 edition published in 2007 in Afrikaans and held by 1 WorldCat member library worldwide

High temperature grain growth and oxidation of Fe-29Ni-17Co (Kovar[trademark]) alloy leads( )

1 edition published in 1993 in English and held by 0 WorldCat member libraries worldwide

One important application for the Fe-29Ni-17Co (Kovar[trademark]) alloy in wire form is in brazed feed through assemblies which are integral parts of vacuum electronic devices. Since Cu metal brazes are performed at process temperatures of about 1100[degrees]C, there is opportunity for significant grain growth to occur during the brazing operation. Additional high temperature exposure includes decarburization of the Fe-29Ni-17Co alloy wire in wet hydrogen for 30 min. at 1000[degrees]C prior to the Cu brazing operation. Two approaches have been used to characterize grain growth in two lots of Fe-29Ni-17Co alloy: (1) a once-through processing study to study the effect of one-time-only device thermal processing on the resulting grain size, and (2) an isothermal grain growth study involving various times at 800--1100[degrees]C. The results of the once-through processing study indicate that acceptable grain sizes are obtained from both cold worked and mill-annealed wire lots following Cu brazing. The isothermal grain growth study indicates that the linear intercept distance for Fe-29Ni-17Co can be described with a power law function of time, and that thermal exposure must be controlled at temperatures in excess of 900[degrees]C in order to avoid excessive grain growth. A second study has characterized the oxidation kinetics of Fe-29Ni-17Co alloy wire in air at temperatures ranging from 550--700[degrees]C. This study indicates the parabolic growth law applies for this material, and between 550 and 700[degrees]C, oxidation in this alloy occurs at an activation energy of 27.9 kcal/mole. Other oxidation studies at higher temperatures ([ge]750[degrees]C) indicate an activation energy of 52.2 kcal/mole for oxidation of Fe-29Ni-17Co alloy at temperatures greater than 790[degrees]C. Quantitative point analyses of the oxide scale formed at 600[degrees]C suggest that a significant fraction of the scale is close to the stoichiometry of the Fe[sub 2]O[sub 3]-type oxide
Development of a re-brazeable containment system for special nuclear material storage and transport( )

1 edition published in 1995 in English and held by 0 WorldCat member libraries worldwide

This report describes a novel means of closing and sealing small type B radioactive material transport packages for surface or air transport as governed by 10CFR71 or NUREG-0360 has been developed at Sandia National Laboratories (SNL). This method is a controlled brazing process that may be used to attach and seal a closure lid to a containment vessel and then remove it at a later time. The process may be performed multiple times without the need for special preparations of the braze joint. A number of advantages for utilization of this technique have been determined. A brazed seal has integrity at high temperatures for better protection in accident or abnormal environments. A properly designed joint has essentially the same strength as the parent metal. A closure that is brazed, therefore, will no longer be the anticipated point of failure for a broad range of accident environments. This technique will allow the containment vessel design to be optimized with a lighter, more uniform wall thickness throughout. Finally, with a well defined process for sealing, mechanical inspection, leak testing, and then reopening at a later time, automation of the process is relatively straightforward and the overall system should be as easy to use as one that utilizes elastomeric seals for containment
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.51 (from 0.01 for Brazing an ... to 1.00 for A BISTATIC ...)

Brazing and soldering : proceedings of the 3rd International Brazing and Soldering Conference : April 24-26, 2006, Crowne Plaza Riverwalk Hotel, San Antonio, Texas, USA
Alternative Names
Stephens, J. J.

Languages
Covers