WorldCat Identities

Shams, T.

Overview
Works: 36 works in 41 publications in 1 language and 56 library holdings
Roles: Author
Classifications: TL242,
Publication Timeline
.
Most widely held works by T Shams
Side door latch/hinge assembly evaluation by T Shams( Book )

1 edition published in 1986 in English and held by 6 WorldCat member libraries worldwide

Roadside safety library : GRAFIX, a graphics post-processor by T Shams( Book )

1 edition published in 1983 in English and held by 3 WorldCat member libraries worldwide

Roadside safety analysis : techniques, evaluation and synthesis : executive summary by T Shams( Book )

1 edition published in 1983 in English and held by 3 WorldCat member libraries worldwide

Roadside safety library : RSIP, roadside safety input preprocessor by T Shams( Book )

1 edition published in 1983 in English and held by 3 WorldCat member libraries worldwide

Roadside safety library : PREP, a plotting and reporting program by T Shams( Book )

1 edition published in 1983 in English and held by 3 WorldCat member libraries worldwide

Roadside safety library : LIRS, library information retrieval system by T Shams( Book )

1 edition published in 1983 in English and held by 3 WorldCat member libraries worldwide

Brain and CVS simulation( Book )

1 edition published in 1984 in English and held by 2 WorldCat member libraries worldwide

Enhanced airbag model for the ATB program by T Shams( Book )

1 edition published in 1993 in English and held by 1 WorldCat member library worldwide

Design and performance of the THOR advanced frontal crash test dummy thorax and abdomen assemblies by N Rangarajan( Book )

1 edition published in 1998 in English and held by 1 WorldCat member library worldwide

Safety of side facing seats in general aviation aircraft by T Shams( Book )

1 edition published in 1995 in English and held by 1 WorldCat member library worldwide

Development of a finite element model of the Thor crash test dummy by Joseph V Canha( Book )

1 edition published in 2000 in English and held by 1 WorldCat member library worldwide

The paper describes the development of a detailed finite element model of the new advanced frontal crash test dummy, Thor. The Volpe Center is developing the model for LS-DYNA in collaboration with GESAC, the dummy hardware developer, under the direction of the NHTSA. The modeling approach and test procedures used to create and validate each major subassembly are discussed. Specialized static and dynamic tests were performed to aid in defining and validating appropriate material models, joint characteristics, and dynamic response characteristics. The details of each dummy component are presented along with the validation procedure based on material and subassembly tests
Design and evaluation of an instrumented abdomen for the NHTSA advanced dummy by N Rangarajan( Book )

1 edition published in 1996 in English and held by 1 WorldCat member library worldwide

Impairment scaling from the Abbreviated Injury Scale. Final report by A Hirsch( Book )

2 editions published in 1983 in English and held by 1 WorldCat member library worldwide

Passenger airbag model of deployment and occupant interaction. volume 2: Input description and program manual. Final report by W. M Mahmoud( Book )

2 editions published in 1990 in English and held by 1 WorldCat member library worldwide

Passenger airbag model of deployment and occupant interaction. Volume 1: Final report. Final report by W. M Mahmoud( Book )

2 editions published in 1990 in English and held by 1 WorldCat member library worldwide

Response of THOR in frontal sled testing in different restraint conditions by N Rangarajan( Book )

1 edition published in 1998 in English and held by 1 WorldCat member library worldwide

Brain and CVS stimulation. Final report by T Shams( Book )

2 editions published in 1984 in English and held by 1 WorldCat member library worldwide

Side door latch/hinge assembly evaluation. Final report by T Shams( Book )

2 editions published in 1986 in English and held by 1 WorldCat member library worldwide

Performance of TAD-50M in vehicle-barrier tests and comparison with Hybrid III by T Shams( Book )

1 edition published in 1996 in English and held by 1 WorldCat member library worldwide

Development of a Software Tool to Analyze Personal Flotation Devices( )

1 edition published in 1992 in English and held by 0 WorldCat member libraries worldwide

A computer program, WAter Forces Analysis Capability (WAFAC), was developed to analyze forces acting on bodies in water. The WAFAC model computes buoyancy, wave-excitation, added-mass, and drag forces acting on a system of linked bodies in water. The bodies are assumed to be rigid ellipsoids. Sea states can be approximated by the superposition of up to ten regular waves or by a single regular wave of amplitude equal to the 'significant wave height' and frequency based on the Pierson-Moskovitz spectrum for fully developed ocean waves. The WAFAC model is structured to compute components of force and moment due to buoyancy, wave-excitation, added-mass, and drag using separate modules. During development, each module was tested to assess the accuracy of the results predicted. The resultant water force and moment acting on each ellipsoid in the system of linked bodies is determined by the vector sum of the individual force components. The WAFAC model was incorporated into the Articulated Total Body (ATB) model to analyze the dynamics of the system of linked bodies subject to the water forces and moments. To validate the model, simple geometries such as spheres and ellipsoids were modeled and the results compared with analytical solutions. Bioengineering, Biomechanics, Buoyancy, Computerized simulation dynamics, Mathematical model, Personal flotation devices
 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.86 (from 0.74 for Developmen ... to 0.99 for Developmen ...)

Languages
English (25)