WorldCat Identities

Zhang, J.

Overview
Works: 261 works in 280 publications in 2 languages and 1,052 library holdings
Genres: Conference papers and proceedings 
Roles: Author, Editor, Musician, Inventor, Thesis advisor
Publication Timeline
.
Most widely held works by J Zhang
Residual stresses and associated stress intensity factors in core shroud weldments( Book )

2 editions published in 1999 in English and held by 89 WorldCat member libraries worldwide

Generation of a crowned pinion tooth surface by a surface of revolution by F. L Litvin( Book )

3 editions published in 1988 in English and held by 87 WorldCat member libraries worldwide

A method of generating crowned pinion tooth surface using a surface of revolution is developed. The crowned pinion meshes with a regular involute gear and has a prescribed parabolic type of transmission errors when the gears operate in the aligned mode. When the gears are misaligned the transmission error remains parabolic with the maximum level still remaining very small (less than 0.34 arc sec for the numerical examples). Tooth contact analysis (TCA) is used to simulate the conditions of meshing, determine the transmission error, and determine the bearing contact. Parallel axis gearing is very sensitive to misalignment of the gear rotation axes. Misalignment can cause edge loading of the teeth and thus premature failure of the gear components. Crowning one or both of the gear pairs can be used. The surface can be modified in the longitudinal direction or in the profile direction, or a combination of longitudinal and profile modification can be used to modify the surface. Transmission mechanical. (jes)
Generation of a crowned pinion tooth surface by a plane by F. L Litvin( Book )

3 editions published in 1988 in English and held by 87 WorldCat member libraries worldwide

The topology of a crowned spur pinion tooth surface that reduces the level of transmission errors due to misalignment is described. The geometry of the modified pinion tooth surface and of the regular involute gear tooth surface is discussed. The tooth contact analysis between the meshing surfaces is also described. Generating a modified pinion tooth surface by a plane whose motion is controlled by a 5-degree-of-freedom system is investigated. The included numerical results indicate that the transmission error remains low as the gears are misaligned. Transmission mechanical, Wear resistance. (JES)
X-ray radiation damage studies and design of a silicon pixel sensor for science at the XFEL by J Zhang( Book )

1 edition published in 2013 in English and held by 5 WorldCat member libraries worldwide

The performance and environmental durability of pultruded glass fibre composite rebars by J Zhang( Book )

3 editions published in 2000 in English and held by 4 WorldCat member libraries worldwide

National transportation statistics. 2004 by L. X Nguyen( Book )

1 edition published in 2005 in English and held by 3 WorldCat member libraries worldwide

The history of Chinese legal civilization by J Zhang( Book )

in English and held by 3 WorldCat member libraries worldwide

A carbon- and oxygen-isotope record of recent environmental change from Qinghai Lake, NE Tibetan Plateau by A. C. G Henderson( Book )

1 edition published in 2003 in English and held by 2 WorldCat member libraries worldwide

A role for abscisic acid in root to shoot communication of changes in the soil environment by J Zhang( Book )

2 editions published in 1988 in English and held by 2 WorldCat member libraries worldwide

Distinuishing Dirac/Majorana sterile neutrinos at the LHC by C. O Dib( Book )

1 edition published in 2016 in English and held by 2 WorldCat member libraries worldwide

Application of spectral decomposition to detection of dispersion anomolies associated with gas saturation by E Odebeatu( )

1 edition published in 2006 in English and held by 2 WorldCat member libraries worldwide

The effect of matrix structure on the metal dusting rate in hydrocarbon environments by GA Slabbert( Book )

2 editions published between 2012 and 2013 in English and held by 2 WorldCat member libraries worldwide

The paper describes work undertaken to identify the influence of the matrix structure on the metal dusting rate of stainless steel alloys. Specifically, the difference in metal dusting rate between austenitic and ferritic stainless steels of similar chromium contents was investigated. [partial abstract]
MACROS case study of knowledge sharing system development within New York state government agencies by Jing Zhang( )

1 edition published in 2004 in English and held by 0 WorldCat member libraries worldwide

Calibration experiments MLHD in CMHD project in China in 2004 by C Kempenaar( )

1 edition published in 2005 in Dutch and held by 0 WorldCat member libraries worldwide

Assessing long-term wind conditions by combining different measure-correlate-predict algorithms : preprint by J Zhang( )

1 edition published in 2013 in English and held by 0 WorldCat member libraries worldwide

Privacy Issues of Applying RFID in Retail Industry by H.; Hung, P. C. K.; Zhang, J.; Ahn, D Li( )

1 edition published in 2005 in English and held by 0 WorldCat member libraries worldwide

Influence of prior deformation on microstructure, mechanical properties and rollability of magnesium alloys( )

1 edition published in 2002 in English and held by 0 WorldCat member libraries worldwide

Energy and energy cost savings analysis of the 2015 IECC for commercial buildings( )

1 edition published in 2015 in English and held by 0 WorldCat member libraries worldwide

"As required by statute (42 USC 6833), DOE recently issued a determination that ANSI/ASHRAE/IES Standard 90.1-2013 would achieve greater energy efficiency in buildings subject to the code compared to the 2010 edition of the standard. Pacific Northwest National Laboratory (PNNL) conducted an energy savings analysis for Standard 90.1-2013 in support of its determination . While Standard 90.1 is the model energy standard for commercial and multi-family residential buildings over three floors (42 USC 6833), many states have historically adopted the International Energy Conservation Code (IECC) for both residential and commercial buildings. This report provides an assessment as to whether buildings constructed to the commercial energy efficiency provisions of the 2015 IECC would save energy and energy costs as compared to the 2012 IECC. PNNL also compared the energy performance of the 2015 IECC with the corresponding Standard 90.1-2013. The goal of this analysis is to help states and local jurisdictions make informed decisions regarding model code adoption"
Ramp forecasting performance from improved short-term wind power forecasting : preprint by J Zhang( )

1 edition published in 2014 in English and held by 0 WorldCat member libraries worldwide

 
moreShow More Titles
fewerShow Fewer Titles
Audience Level
0
Audience Level
1
  Kids General Special  
Audience level: 0.61 (from 0.07 for MACROS cas ... to 0.96 for Distinuish ...)

National transportation statistics. 2004
Languages
English (30)

Dutch (1)

Covers