컨텐츠로 이동
Advanced materials modeling for structures 해당 항목을 미리보기
닫기해당 항목을 미리보기
확인중입니다…

Advanced materials modeling for structures

저자: Holm Altenbach; Serge Kruch
출판사: Berlin ; New York : Springer, ©2013.
시리즈: Advanced structured materials, v.19.
판/형식:   전자도서 : 문서 : 컨퍼런스 간행물 : 영어모든 판과 형식 보기
데이터베이스:WorldCat
요약:
This volume presents the major outcome of the IUTAM symposium on "Advanced Materials Modeling for Structures". It discusses advances in high temperature materials research, and also to provides a discussion the new horizon of this fundamental field of applied mechanics. The topics cover a large domain of research but place a particular emphasis on multiscale approaches at several length scales applied to non linear  더 읽기…
평가:

(아무런 평가가 없습니다.) 0 리뷰와 함께 - 첫번째로 올려주세요.

주제
다음과 같습니다:

 

온라인으로 문서 찾기

이 항목에 대한 링크

도서관에서 사본 찾기

&AllPage.SpinnerRetrieving; 해당항목을 보유하고 있는 도서관을 찾는 중

상세정보

장르/형태: Electronic books
Conference proceedings
Congresses
추가적인 물리적 형식: Print version:
Advanced Materials Modeling for Structures
Dordrecht : Springer, c2013
자료 유형: 컨퍼런스 간행물, 문서, 인터넷 자료
문서 형식: 인터넷 자원, 컴퓨터 파일
모든 저자 / 참여자: Holm Altenbach; Serge Kruch
ISBN: 9783642351679 3642351670
OCLC 번호: 827212385
설명: 1 online resource (363 p.)
내용: Micromechanical modelling of void healing / Shireen Afshan, Daniel Balint, Jianguo Lin --
Surface viscoeleasticity and effective properties of materials and structures / Holm Atlenbach, Victor A. Eremeyev --
High-temperature ineleastic behavior of the Austenitic steel AISI type 316 / Holm Altenbach, Yevgen Gorash --
Finite element modelling of the thermo-mechanical behaviour of a 9Cr martensitic steel / R.A. Barrett, P.E. O'Donoghue, S.B. Leen --
Enhanced global digital image correlation for accurate measurement of microbeam bending / L.I.J.C. Bergers, J. Neggers --
An investigation of the mechanical properties of open cell aluminum foam struts: microtensile testing and modelling / Charles Betts, Daniel Balint, Jianguo Lin --
Multiscale optimization of joints of dissimilar materials in nature and lessons for engineering applications / Victor Birman, Yanxin Liu --
Some consequences of stress range dependent constitutive models in creep / James T. Boyle --
Micro-mechanical numerical studies on the stress state dependence of ductile damage / Michael Brunig, Steffen Gerke, Vanessa Hagenbrock --
Characterization of load sensitive fatigure crack initiation in Ti-alloys using crystal plasticity based FE simulations / P. Chakraborty, S. Ghosh --
Creep crack growth modelling in 316H stainless steel / Catrin M. Davies, Ali Mehmanparast --
On the non saturation of cyclic plasticity law: a power law for kinematic hardening / Rodrigue Desmorat --
Micromechanical studies of deformation, stress and crack nucleation in polycrystal materials / F.P.E. Dunne, C. Sweeney --
Modelling of coupled dissipative phenomena in engineering materials / Halina Egner, Wladyslaw Egner --
Damage deactivation of engineering materials and structures / Artur Ganczarski, Marcin Cegielski --
Effect of orientation and overaging on the creep and creep crack growth properties of 2xxx aluminum alloy forgings / Elisabetta Gariboldi, Antonietta Lo Conte --
Dislocation-induced internal stress / Peter Geantil, Benoit Devincre, Michael E. Kassner --
A strain rate sensitive formulation to account for the effect of rafting on the high temperature mechanical properties of Ni-based single crystal superalloys / Jean-Briac le Graverend, Jonathan Cormier --
An overview of small speciment creep testing / T.H. Hyde, W. Sun, C.J. Hyde --
Kelvin modes based cubic plasticity and induced anisotropic damage: application to creep of AM1 single crystal / Roxane Marull, Rodrigue Desmorat --
A grand master curve approach for off-axis creep rupture behavior of orthopedic fiber composites at different temperatures / Masamichi Kawai --
Recent advances in the processing and properties of ultrafine-grained metals prepared using severe plastic deformation / Terence G. Langdon --
Macro/micro elastic-viscoplastic analysis of woven composites laminates with misaligned woven fabrics / Tetsuya Matsuda, Shinya Kanamaru --
A masing-type modelling concept for cyclic plasticity at elevated temperature / Thomas Mayer, Edoardo Mazza, Stuart R. Holdsworth --
Phase-field simulation of microstructural evolution in Nickel-based superalloys during creep and in low carbon steels during martensite transformation / Yoshinori Murata, Yuhki Tsukada, Toshiyuki Koyama --
Viscoplastic constitutive model to divide inelastic strain into time-independent and time-dependent strains / Ken-ichi Ohguchi, Katsuhiko Sasaki --
Multiaxial low cylce fatigue for Ni-base single crystal super alloy at high temperature / Masao Sakane, Shengde Zhang, Akira Yoshinari --
Mechanics of materials for microelectronic components and packages / Vadim V. Silberschmidt --
Constitutive models for the description of creep and plasticity of cast and wrought Mg-Al and Mg-Zn alloys / Stefano Spigarelli, Mohammad El Mehtedi, A. Di Salvia --
Deformation and failure of various alloys under creep-fatigue loading and their modelling / Yukio Takahashi --
The effect of temperature on interfacial gradient plasticity in metallic thin films / George Z. Voyiadjis, Danial Faghihi --
A cyclic crystal viscoplastic model considering both dislocation slip and twinning / Cao Yu, Guozheng Kang, Qianhua Kan.
일련 제목: Advanced structured materials, v.19.
책임: Holm Altenbach, Serge Kruch, editors.
더 많은 정보:

초록:

This book presents results of the IUTAM symposium "Advanced Materials Modeling for Structures," on advances in high temperature materials research, emphasizing multiscale approaches at several length  더 읽기…

리뷰

사용자-기여 리뷰
GoodReads 리뷰 가져오는 중…
DOGObooks 리뷰를 가지고 오는 중…

태그

첫번째 되기
요청하신 것을 확인하기

이 항목을 이미 요청하셨을 수도 있습니다. 만약 이 요청을 계속해서 진행하시려면 Ok을 선택하세요.

링크된 데이터


<http://www.worldcat.org/oclc/827212385>
library:oclcnum"827212385"
library:placeOfPublication
library:placeOfPublication
library:placeOfPublication
owl:sameAs<info:oclcnum/827212385>
rdf:typeschema:Book
schema:about
schema:about
schema:about
<http://id.worldcat.org/fast/1011853>
rdf:typeschema:Intangible
schema:name"Building materials."@en
schema:name"Materials--Mechanical properties"@en
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:bookFormatschema:EBook
schema:contributor
schema:contributor
schema:copyrightYear"2013"
schema:datePublished"2013"
schema:description"This volume presents the major outcome of the IUTAM symposium on "Advanced Materials Modeling for Structures". It discusses advances in high temperature materials research, and also to provides a discussion the new horizon of this fundamental field of applied mechanics. The topics cover a large domain of research but place a particular emphasis on multiscale approaches at several length scales applied to non linear and heterogeneous materials. Discussions of new approaches are emphasised from various related disciplines, including metal physics, micromechanics, mathematical and computational mechanics."@en
schema:exampleOfWork<http://worldcat.org/entity/work/id/1182632157>
schema:genre"Conference proceedings"@en
schema:genre"Conference proceedings."@en
schema:genre"Electronic books."@en
schema:inLanguage"en"
schema:name"Advanced materials modeling for structures"@en
schema:publisher
schema:url<http://dx.doi.org/10.1007/978-3-642-35167-9>
schema:url<http://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&db=nlabk&AN=566266>
schema:url<http://lib.myilibrary.com?id=464829>
schema:url<http://site.ebrary.com/id/10657121>
schema:url<http://public.eblib.com/EBLPublic/PublicView.do?ptiID=1082883>
schema:url
schema:workExample

Content-negotiable representations

윈도우 닫기

WorldCat에 로그인 하십시오 

계정이 없으세요? 아주 간단한 절차를 통하여 무료 계정을 만드실 수 있습니다.