跳至内容
Advanced materials modeling for structures 線上預覽
關閉線上預覽
正在查...

Advanced materials modeling for structures

作者: Holm Altenbach; Serge Kruch
出版商: Berlin ; New York : Springer, ©2013.
叢書: Advanced structured materials, v.19.
版本/格式:   電子書 : 文獻 : 會議刊物 : 英語所有版本和格式的總覽
資料庫:WorldCat
提要:
This volume presents the major outcome of the IUTAM symposium on "Advanced Materials Modeling for Structures". It discusses advances in high temperature materials research, and also to provides a discussion the new horizon of this fundamental field of applied mechanics. The topics cover a large domain of research but place a particular emphasis on multiscale approaches at several length scales applied to non linear  再讀一些...
評定級別:

(尚未評分) 0 附有評論 - 成爲第一個。

主題
更多類似這樣的

 

在線上查詢

與資料的連結

在圖書館查詢

&AllPage.SpinnerRetrieving; 正在查詢有此資料的圖書館...

詳細書目

類型/形式: Electronic books
Conference proceedings
Congresses
其他的實體格式: Print version:
Advanced Materials Modeling for Structures
Dordrecht : Springer, c2013
資料類型: 會議刊物, 文獻, 網際網路資源
文件類型: 網路資源, 電腦資料
所有的作者/貢獻者: Holm Altenbach; Serge Kruch
ISBN: 9783642351679 3642351670
OCLC系統控制編碼: 827212385
描述: 1 online resource (363 p.)
内容: Micromechanical modelling of void healing / Shireen Afshan, Daniel Balint, Jianguo Lin --
Surface viscoeleasticity and effective properties of materials and structures / Holm Atlenbach, Victor A. Eremeyev --
High-temperature ineleastic behavior of the Austenitic steel AISI type 316 / Holm Altenbach, Yevgen Gorash --
Finite element modelling of the thermo-mechanical behaviour of a 9Cr martensitic steel / R.A. Barrett, P.E. O'Donoghue, S.B. Leen --
Enhanced global digital image correlation for accurate measurement of microbeam bending / L.I.J.C. Bergers, J. Neggers --
An investigation of the mechanical properties of open cell aluminum foam struts: microtensile testing and modelling / Charles Betts, Daniel Balint, Jianguo Lin --
Multiscale optimization of joints of dissimilar materials in nature and lessons for engineering applications / Victor Birman, Yanxin Liu --
Some consequences of stress range dependent constitutive models in creep / James T. Boyle --
Micro-mechanical numerical studies on the stress state dependence of ductile damage / Michael Brunig, Steffen Gerke, Vanessa Hagenbrock --
Characterization of load sensitive fatigure crack initiation in Ti-alloys using crystal plasticity based FE simulations / P. Chakraborty, S. Ghosh --
Creep crack growth modelling in 316H stainless steel / Catrin M. Davies, Ali Mehmanparast --
On the non saturation of cyclic plasticity law: a power law for kinematic hardening / Rodrigue Desmorat --
Micromechanical studies of deformation, stress and crack nucleation in polycrystal materials / F.P.E. Dunne, C. Sweeney --
Modelling of coupled dissipative phenomena in engineering materials / Halina Egner, Wladyslaw Egner --
Damage deactivation of engineering materials and structures / Artur Ganczarski, Marcin Cegielski --
Effect of orientation and overaging on the creep and creep crack growth properties of 2xxx aluminum alloy forgings / Elisabetta Gariboldi, Antonietta Lo Conte --
Dislocation-induced internal stress / Peter Geantil, Benoit Devincre, Michael E. Kassner --
A strain rate sensitive formulation to account for the effect of rafting on the high temperature mechanical properties of Ni-based single crystal superalloys / Jean-Briac le Graverend, Jonathan Cormier --
An overview of small speciment creep testing / T.H. Hyde, W. Sun, C.J. Hyde --
Kelvin modes based cubic plasticity and induced anisotropic damage: application to creep of AM1 single crystal / Roxane Marull, Rodrigue Desmorat --
A grand master curve approach for off-axis creep rupture behavior of orthopedic fiber composites at different temperatures / Masamichi Kawai --
Recent advances in the processing and properties of ultrafine-grained metals prepared using severe plastic deformation / Terence G. Langdon --
Macro/micro elastic-viscoplastic analysis of woven composites laminates with misaligned woven fabrics / Tetsuya Matsuda, Shinya Kanamaru --
A masing-type modelling concept for cyclic plasticity at elevated temperature / Thomas Mayer, Edoardo Mazza, Stuart R. Holdsworth --
Phase-field simulation of microstructural evolution in Nickel-based superalloys during creep and in low carbon steels during martensite transformation / Yoshinori Murata, Yuhki Tsukada, Toshiyuki Koyama --
Viscoplastic constitutive model to divide inelastic strain into time-independent and time-dependent strains / Ken-ichi Ohguchi, Katsuhiko Sasaki --
Multiaxial low cylce fatigue for Ni-base single crystal super alloy at high temperature / Masao Sakane, Shengde Zhang, Akira Yoshinari --
Mechanics of materials for microelectronic components and packages / Vadim V. Silberschmidt --
Constitutive models for the description of creep and plasticity of cast and wrought Mg-Al and Mg-Zn alloys / Stefano Spigarelli, Mohammad El Mehtedi, A. Di Salvia --
Deformation and failure of various alloys under creep-fatigue loading and their modelling / Yukio Takahashi --
The effect of temperature on interfacial gradient plasticity in metallic thin films / George Z. Voyiadjis, Danial Faghihi --
A cyclic crystal viscoplastic model considering both dislocation slip and twinning / Cao Yu, Guozheng Kang, Qianhua Kan.
叢書名: Advanced structured materials, v.19.
責任: Holm Altenbach, Serge Kruch, editors.
更多資訊:

摘要:

This book presents results of the IUTAM symposium "Advanced Materials Modeling for Structures," on advances in high temperature materials research, emphasizing multiscale approaches at several length  再讀一些...

評論

讀者提供的評論
正在擷取GoodReads評論...
正在擷取DOGObooks的評論

標籤

成爲第一個
確認申請

你可能已經申請過這份資料。若還是想申請,請選確認。

連結資料


<http://www.worldcat.org/oclc/827212385>
library:oclcnum"827212385"
library:placeOfPublication
library:placeOfPublication
library:placeOfPublication
owl:sameAs<info:oclcnum/827212385>
rdf:typeschema:Book
schema:about
schema:about
schema:about
<http://id.worldcat.org/fast/1011853>
rdf:typeschema:Intangible
schema:name"Building materials."@en
schema:name"Materials--Mechanical properties"@en
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:bookFormatschema:EBook
schema:contributor
schema:contributor
schema:copyrightYear"2013"
schema:datePublished"2013"
schema:description"This volume presents the major outcome of the IUTAM symposium on "Advanced Materials Modeling for Structures". It discusses advances in high temperature materials research, and also to provides a discussion the new horizon of this fundamental field of applied mechanics. The topics cover a large domain of research but place a particular emphasis on multiscale approaches at several length scales applied to non linear and heterogeneous materials. Discussions of new approaches are emphasised from various related disciplines, including metal physics, micromechanics, mathematical and computational mechanics."@en
schema:exampleOfWork<http://worldcat.org/entity/work/id/1182632157>
schema:genre"Conference proceedings"@en
schema:genre"Conference proceedings."@en
schema:genre"Electronic books."@en
schema:inLanguage"en"
schema:name"Advanced materials modeling for structures"@en
schema:publisher
schema:url<http://dx.doi.org/10.1007/978-3-642-35167-9>
schema:url<http://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&db=nlabk&AN=566266>
schema:url<http://lib.myilibrary.com?id=464829>
schema:url<http://site.ebrary.com/id/10657121>
schema:url<http://public.eblib.com/EBLPublic/PublicView.do?ptiID=1082883>
schema:url
schema:workExample

Content-negotiable representations

關閉視窗

請登入WorldCat 

没有帳號嗎?你可很容易的 建立免費的帳號.