omitir hasta el contenido
Dental materials : properties and manipulation Ver este material de antemano
CerrarVer este material de antemano
Chequeando…

Dental materials : properties and manipulation

Autor: John M Powers; John C Wataha
Editorial: St. Louis, Mo. : Elsevier/Mosby, ©2013.
Edición/Formato:   Libro : Inglés (eng) : 10th edVer todas las ediciones y todos los formatos
Base de datos:WorldCat
Resumen:

Focusing on the dental materials most commonly used, this book covers the tasks that dental assistants and dental hygienists typically perform. It shows how to mix and apply them in a clinical  Leer más

Calificación:

(todavía no calificado) 0 con reseñas - Ser el primero.

Temas
Más materiales como éste

 

Encontrar un ejemplar en la biblioteca

&AllPage.SpinnerRetrieving; Encontrando bibliotecas que tienen este material…

Detalles

Tipo de documento: Libro/Texto
Todos autores / colaboradores: John M Powers; John C Wataha
ISBN: 9780323078368 0323078362
Número OCLC: 768071631
Descripción: x, 236 p. : ill. (chiefly col.) ; 28 cm.
Contenido: 1. Introduction to restorative dental materials. Dental disease and restorative materials --
Restoration of damaged teeth --
Replacement of lost or missing teeth --
Prevention of disease and trauma --
2. Properties of materials. Dimensional change --
Thermal conductivity --
Electrical properties --
Solubility and sorption --
Wettability --
Mechanical properties --
3. Preventive dental materials. Fluoride gels, foams, rinses, and varnishes --
Pit and fissure sealants --
Mouth protectors --
4. Direct esthetic restorative materials. Composites --
Composites for special applications --
Compomers --
Glass ionomers --
Resin-modified glass ionomers --
Bonding agents --
Light-curing units --
5. Dental amalgam. Silver alloys for dental amalgams --
Mercury --
Reaction of silver alloy with mercury --
Properties of amalgam --
Manipulation of amalgam --
Limiting exposure to mercury --
6. Finishing, polishing, and cleansing materials. Abrasion --
Prophylactic pastes --
Dentifrices --
Denture cleansers --
Whitening --
7. Cements. Cementation --
Water-based cements --
Oil-based cements --
Resin-based cements --
High-strength bases --
Temporary fillings --
Low-strength bases --
Cavity liners and varnishes --
Special applications of cement --
8. Impression materials. Alginate hydrocoloid impression material --
Alginate substitute impression material --
Elastomeric impression materials --
Addition silicone impression materials --
Polyether impression materials --
Disinfection of elastomeric impressions --
Elastomeric materials for bite registration --
Digital impressions --
9. Model and die materials. Desirable qualities and types of products --
Gypsum products --
Epoxy products --
Dies from digital data --
10. Waxes. Important properties of waxes --
Pattern waxes --
Processing waxes --
11. Casting alloys, wrought alloys, and solders. Fundamental concepts about metals and alloys --
Casting alloys --
Ceramic-bonding casting alloys --
Wrought alloys --
Solders --
Biocopatibility of alloys and solders --
12. Casting and soldering. Waxing and spruing --
Investing and burnout --
Casting --
Finishing --
Soldering --
13. Polymers in prosthodontics. Polymerization --
Complete dentures --
Denture soft liners --
Acrylic polymers combined with alloys --
Polymer denture teeth --
Other uses of polymers in prosthodontics --
14. Dental ceramics. Ceramics in dentistry --
Properties of ceramics --
Clinical uses of dental ceramics --
15. Dental implants. Important principles --
Clinical issues --
Implant materials.
Responsabilidad: John M. Powers, John C. Wataha.

Reseñas

Reseñas contribuidas por usuarios
Recuperando reseñas de GoodReads…
Recuperando reseñas de DOGObooks…

Etiquetas

Ser el primero.

Materiales similares

Temas relacionados:(2)

Confirmar este pedido

Ya ha pedido este material. Escoja OK si desea procesar el pedido de todos modos.

Datos enlazados


<http://www.worldcat.org/oclc/768071631>
library:oclcnum"768071631"
library:placeOfPublication
library:placeOfPublication
rdf:typeschema:Book
schema:about
schema:about
schema:about
schema:bookEdition"10th ed."
schema:contributor
schema:copyrightYear"2013"
schema:creator
schema:datePublished"2013"
schema:description"1. Introduction to restorative dental materials. Dental disease and restorative materials -- Restoration of damaged teeth -- Replacement of lost or missing teeth -- Prevention of disease and trauma -- 2. Properties of materials. Dimensional change -- Thermal conductivity -- Electrical properties -- Solubility and sorption -- Wettability -- Mechanical properties -- 3. Preventive dental materials. Fluoride gels, foams, rinses, and varnishes -- Pit and fissure sealants -- Mouth protectors -- 4. Direct esthetic restorative materials. Composites -- Composites for special applications -- Compomers -- Glass ionomers -- Resin-modified glass ionomers -- Bonding agents -- Light-curing units -- 5. Dental amalgam. Silver alloys for dental amalgams -- Mercury -- Reaction of silver alloy with mercury -- Properties of amalgam -- Manipulation of amalgam -- Limiting exposure to mercury -- 6. Finishing, polishing, and cleansing materials. Abrasion -- Prophylactic pastes -- Dentifrices -- Denture cleansers -- Whitening --"@en
schema:description"12. Casting and soldering. Waxing and spruing -- Investing and burnout -- Casting -- Finishing -- Soldering -- 13. Polymers in prosthodontics. Polymerization -- Complete dentures -- Denture soft liners -- Acrylic polymers combined with alloys -- Polymer denture teeth -- Other uses of polymers in prosthodontics -- 14. Dental ceramics. Ceramics in dentistry -- Properties of ceramics -- Clinical uses of dental ceramics -- 15. Dental implants. Important principles -- Clinical issues -- Implant materials."@en
schema:description"7. Cements. Cementation -- Water-based cements -- Oil-based cements -- Resin-based cements -- High-strength bases -- Temporary fillings -- Low-strength bases -- Cavity liners and varnishes -- Special applications of cement -- 8. Impression materials. Alginate hydrocoloid impression material -- Alginate substitute impression material -- Elastomeric impression materials -- Addition silicone impression materials -- Polyether impression materials -- Disinfection of elastomeric impressions -- Elastomeric materials for bite registration -- Digital impressions -- 9. Model and die materials. Desirable qualities and types of products -- Gypsum products -- Epoxy products -- Dies from digital data -- 10. Waxes. Important properties of waxes -- Pattern waxes -- Processing waxes -- 11. Casting alloys, wrought alloys, and solders. Fundamental concepts about metals and alloys -- Casting alloys -- Ceramic-bonding casting alloys -- Wrought alloys -- Solders -- Biocopatibility of alloys and solders --"@en
schema:exampleOfWork<http://worldcat.org/entity/work/id/287255219>
schema:inLanguage"en"
schema:name"Dental materials : properties and manipulation"@en
schema:numberOfPages"236"
schema:publication
schema:publisher
schema:workExample
umbel:isLike<http://bnb.data.bl.uk/id/resource/GBB1D9162>
wdrs:describedby

Content-negotiable representations

Cerrar ventana

Inicie una sesión con WorldCat 

¿No tienes una cuenta? Puede fácilmente crear una cuenta gratuita.