skip to content
Engineering graphics with AutoCAD 2015 Preview this item
ClosePreview this item
Checking...

Engineering graphics with AutoCAD 2015

Author: James D Bethune
Publisher: Boston : Pearson, [2015]
Edition/Format:   Print book : EnglishView all editions and formats
Summary:
This book teaches students technical drawing using AutoCAD 2015 as its drawing instrument, complying with ANSI standards. Taking a step-by-step approach, it encourages students to work at their own pace and uses sample problems and illustrations to guide them through the powerful features of this drawing program. Nearly 150 exercise problems provide instructors with a variety of assignment material and students with  Read more...
Rating:

(not yet rated) 0 with reviews - Be the first.

Subjects
More like this

Find a copy in the library

&AllPage.SpinnerRetrieving; Finding libraries that hold this item...

Details

Document Type: Book
All Authors / Contributors: James D Bethune
ISBN: 9780133962208 0133962202
OCLC Number: 877853353
Notes: Includes index.
Description: xxi, 814 pages ; 29 cm
Contents: Machine generated contents note: ch. 1 Getting Started --
1-1.Introduction --
To Start a New Drawing --
An Alternative Method to Starting a New Drawing --
1-2.Tabs and Panels --
To Access Additional Commands Within a Panel --
Help Boxes for Commands --
To Access Other Help Information --
1-3.The Command Line Box --
To Enter a Diameter Value --
1-4.Command Tools --
To Determine the Command That a Tool Represents --
1-5.Starting a New Drawing --
1-6.Naming a Drawing --
To Start a New Drawing --
To Save a New Drawing File --
1-7.Drawing Units --
To Specify or to Change the Drawing Units --
To Specify or Change the Precision of the Units System --
To Specify or Change the Angle Units Value --
1-8.Drawing Limits --
To Align the Drawing Limits with a Standard A3 (Metric) Paper Size --
1-9.Grid and Snap --
To Set the Grid and Snap Values --
1-10.Sample Problem SP1-1 --
To Specify the Drawing Units --
To Define the Drawing Precision --
To Calibrate the Sheet Size Note continued: To Set the Grid and Snap Values --
1-11.Save and Save As --
To Use the Save and Save As Commands --
1-12.Open --
To Use the Open Command --
1-13.Close --
1-14.Exercise Problems --
ch. 2 Fundamentals of 2D Construction --
2-1.Introduction --
2-2.Line --
Random Points --
To Randomly Select Points (See Figure 2-2) --
To Exit a Command Sequence --
To Create a Closed Area (See Figure 2-4) --
2-3.Erase --
To Erase Individual Lines --
To Erase a Group of Lines Simultaneously (See Figure 2-6) --
2-4.Line --
Snap Points --
Problem: Draw a 3" [×] 5" Rectangle --
2-5.Line --
Dynamic Inputs --
To Create Lines by Using Dynamic Input --
To Access the Dynamic Input Settings --
2-6.Construction Line --
Other Construction Line Commands: Hor Ver Ang --
Other Construction Line Command: Offset --
2-7.Circle --
To Draw a Circle --
Radius (See Figure 2-14) --
To Draw a Circle --
Diameter (See Figure 2-14) --
To Draw a Circle --
2 Points (See Figure 2-15) Note continued: To Draw a Circle --
3 Points (See Figure 2-15) --
To Draw a Circle --
Tangent Tangent Radius --
Quadrant-Sensitive Applications --
2-8.Circle Centerlines --
To Change the Dimcen System Variable --
To Use the Center Mark Tool --
2-9.Polyline --
To Draw a Polyline (See Figure 2-20) --
To Verify That a Polyline Is a Single Entity --
To Draw a Polyline: Arc (See Figure 2-21) --
Other Options with a Polyline Arc --
To Draw Different Line Thicknesses (See Figure 2-23) --
2-10.Spline --
2-11.Ellipse --
To Draw an Ellipse --
Axis Endpoint (See Figure 2-25) --
To Draw an Ellipse --
Center (See Figure 2-26) --
To Draw an Ellipse --
Arc (See Figure 2-27) --
To Draw an Ellipse by Defining Its Angle of Rotation About the Major Axis (See Figure 2-29) --
2-12.Rectangle --
To Draw a Rectangle (See Figure 2-30) --
To Explode a Rectangle (See Figure 2-30) --
2-13.Polygon --
To Draw a Polygon --
Center Point (See Figure 2-31) Note continued: To Draw a Polygon --
Edge Distance (See Figure 2-31) --
2-14.Point --
To Change the Shape of a Point (See Figure 2-32) --
To Change the Size of a Point (See Figure 2-32) --
2-15.Text --
To Use the Multiline Text Tool (See Figures 2-33 Through 2-39) --
The Text Editor Panel --
To Access the Text Editor --
To Change Text Height --
To Change the Text Font --
To Justify Text --
To Justify the Text to the Right --
The Symbol Options --
Text Color --
2-16.Move --
To Move an Object --
2-17.Copy --
To Copy an Object --
To Draw Multiple Copies (See Figure 2-45) --
2-18.Offset (See Figure 2-46) --
2-19.Mirror (See Figure 2-47) --
2-20.Array --
To Use the Rectangular Array Option --
To Use the Polar Array Option --
2-21.Rotate --
To Rotate an Object (See Figure 2-51) --
2-22.Trim --
To Use the Trim Command (See Figure 2-52) --
2-23.Extend --
2-24.Break --
To Use the Break Command --
To Use the First Point Option --
2-25.Chamfer --
To Create a Chamfer Note continued: 2-26.Fillet --
To Draw a Fillet --
2-27.Table --
To Create a Table --
2-28.Exercise Problems --
ch. 3 Advanced Commands --
3-1.Introduction --
3-2.Osnap --
To Access the Osnap Commands --
To Turn Osnap On --
To Change the Size of the Osnap Cursor Box --
3-3.Osnap --
Endpoint --
To Snap to the Endpoint of an Existing Line --
3-4.Osnap --
Snap From --
To Move a Line --
To Change the Angle and Length of a Line --
To Apply the Snap From Option to a Circle --
3-5.Osnap --
Midpoint --
To Draw a Circle About the Midpoint of a Line --
3-6.Osnap --
Intersection --
To Use the Osnap Intersection Command to Define an Ellipse --
3-7.Osnap --
Apparent Intersection --
To Draw a Circle Centered About an Apparent Intersection --
3-8.Osnap --
Center --
To Draw a Line to the Center Point of a Circle --
3-9.Osnap --
Quadrant --
To Draw a Line to One of a Circle's Quadrant Points --
3-10.Osnap --
Perpendicular --
To Draw a Line Perpendicular to a Line --
3-11.Osnap --
Tangent Note continued: To Draw a Line Tangent to a Circle --
3-12.Osnap --
Nearest --
To Draw a Line from a Point to the Nearest Selected Point on an Existing Line --
3-13.Sample Problem SP3-1 --
3-14.Sample Problem SP3-2 --
3-15.Grips --
To Turn the Grips Function Off --
To Access the Grips Dialog Box --
3-16.Grips --
Extend --
To Extend the Length of a Line (See Figure 3-24) --
3-17.Grips --
Move --
To Move an Object by Using Grips (See Figure 3-25) --
3-18.Grips --
Rotate --
To Rotate an Object by Using Grips (See Figure 3-26) --
3-19.Grips --
Scale --
To Change the Scale of an Object (See Figure 3-27) --
3-20.Grips --
Mirror --
To Mirror an Object (See Figure 3-28) --
3-21.Blocks --
To Create a Block --
To Insert a Block --
To Change the Scale of a Block --
To Explode a Block --
3-22.Working with Blocks --
To Insert Blocks at Different Angles --
To Insert Blocks with Different Scale Factors --
To Use the Insert Dialog Box to Change the Shape of a Block --
To Combine Blocks Note continued: 3-23.Wblock --
To Create a Wblock --
To Verify that a Wblock Has Been Created --
To Change the Size of a Wblock --
3-24.Layers --
To Create New Layers --
To Change the Color and Linetype of a Layer --
To Draw on Different Layers --
To Change Layers --
To Change the Scale of a Linetype --
To Use the Match Tool --
To Turn Layers Off --
3-25.Attributes --
To Add an Attribute to a Block --
To Create a New Block that Includes Attributes --
To Insert an Existing Block with Attributes --
To Edit an Existing Attribute --
3-26.Title Blocks with Attributes --
3-27.Edit Polyline --
To Create a Spline from a Given Polyline --
3-28.Edit Spline --
To Edit a Spline --
3-29.Edit Text --
To Change Existing Text --
3-30.Constructing the Bisector of an Angle --
Method I --
3-31.Constructing the Bisector of an Angle --
Method II --
3-32.Constructing an Ogee Curve (S-Curve) with Equal Arcs --
3-33.Constructing a Parabola --
3-34.Constructing a Hyperbola Note continued: 3-35.Constructing a Spiral --
3-36.Constructing a Helix --
3-37.Designing by Using Shape Parameters --
Design Problem DP3-1 --
Design Problem DP3-2 --
3-38.Exercise Problems --
ch. 4 Sketching --
4-1.Introduction --
4-2.Establishing Your Own Style --
4-3.Graph Paper --
4-4.Pencils --
4-5.Lines --
4-6.Proportions --
4-7.Curves --
4-8.Sample Problem SP4-1 --
4-9.Isometric Sketches --
4-10.Sample Problem SP4-2 --
4-11.Oblique Sketches --
4-12.Perspective Sketches --
4-13.Working in Different Orientations --
4-14.Exercise Problems --
ch. 5 Orthographic Views --
5-1.Introduction --
5-2.Three Views of an Object --
5-3.Visualization --
To Draw a Three-Dimensional Box --
5-4.Hidden Lines --
5-5.Hidden Line Conventions --
5-6.Drawing Hidden Lines --
To Add Hidden Linetypes to the Drawing --
To Create a Hidden Layer for General Use --
To Change Layers --
5-7.Precedence of Lines --
5-8.Slanted Surfaces --
5-9.Projection Between Views --
5-10.Sample Problem SP5-1 Note continued: 5-11.Compound Lines --
5-12.Sample Problem SP5-2 --
5-13.Oblique Surfaces --
5-14.Sample Problem SP5-3 --
5-15.Rounded Surfaces --
5-16.Sample Problem SP5-4 --
5-17.Holes --
5-18.Holes in Slanted Surfaces --
To Draw an Ellipse Representing a Projected Hole --
To Draw Three Views of a Hole in a Slanted Surface --
To Draw Three Views of a Hole Through an Oblique Surface --
5-19.Cylinders --
5-20.Sample Problem SP5-5 --
5-21.Cylinders with Slanted and Rounded Surfaces --
5-22.Sample Problem SP5-6 --
5-23.Drawing Conventions and Cylinders --
5-24.Irregular Surfaces --
5-25.Sample Problem SP5-7 --
5-26.Hole Callouts --
To Draw a Countersunk Hole (See Figure 5-65) --
5-27.Castings --
5-28.Sample Problem SP5-8 --
5-29.Thin-Walled Objects --
5-30.Sample Problem SP5-9 --
5-31.Intersections --
5-32.Sample Problem SP5-10 --
5-33.Sample Problem SP5-11 --
5-34.Sample Problem SP5-12 --
5-35.Designing by Modifying an Existing Part --
5-36.Drawing Standards Note continued: 5-37.Third- and First-Angle Projections --
5-38.Exercise Problems --
ch. 6 Sectional Views --
6-1.Introduction --
6-2.Cutting Plane Lines --
To Draw a Cutting Plane Line --
Method I --
To Draw an Arrowhead --
To Change the Size of an Arrowhead --
To Draw a Cutting Plane Line --
Method II --
To Draw Cutting Plane Lines --
6-3.Section Lines --
6-4.Hatch --
To Hatch a Given Area --
To Change Hatch Patterns --
To Change the Spacing and Angle of a Hatch Pattern --
6-5.Sample Problem SP6-1 --
6-6.Styles of Section Lines --
6-7.Sectional View Location --
6-8.Holes in Sections --
6-9.Gradients --
To Create a Gradient --
6-10.Offset Sections --
6-11.Multiple Sections --
6-12.Aligned Sections --
6-13.Drawing Conventions in Sections --
6-14.Half, Partial, and Broken-Out Sectional Views --
To Draw a Broken Line --
6-15.Removed Sectional Views --
6-16.Breaks --
To Draw an S-Break (See Figure 6-40) --
6-17.Sectional Views of Castings --
6-18.Exercise Problems Note continued: ch. 7 Auxiliary Views --
7-1.Introduction --
7-2.Projection Between Normal and Auxiliary Views --
To Rotate the Drawing's Axis System (See Figure 7-6) --
7-3.Sample Problem SP7-1 --
7-4.Transferring Lines Between Views --
To Measure the Length of a Line --
To Grip and Move a Line (See Figure 7-10) --
To Rotate and Move a Line --
7-5.Sample Problem SP7-2 --
7-6.Projecting Rounded Surfaces --
7-7.Sample Problem SP7-3 --
7-8.Projecting Irregular Surfaces --
7-9.Sample Problem SP7-4 --
7-10.Sample Problem SP7-5 --
7-11.Partial Auxiliary Views --
7-12.Sectional Auxiliary Views --
7-13.Auxiliary Views of Oblique Surfaces --
7-14.Secondary Auxiliary Views --
To Draw the First Auxiliary View --
To Draw the Secondary Auxiliary View --
7-15.Sample Problem SP7-6 --
7-16.Secondary Auxiliary View of an Ellipse --
7-17.Exercise Problems --
ch. 8 Dimensioning --
8-1.Introduction --
8-2.Terminology and Conventions --
Some Common Terms (See Figure 8-2) Note continued: Some Dimensioning Conventions (See Figure 8-3) --
Some Common Errors to Avoid (See Figure 8-4) --
8-3.Linear Dimension --
To Create a Horizontal Dimension by Selecting Extension Line Locations or Origins (See Figure 8-5) --
To Create a Vertical Dimension --
To Create a Horizontal Dimension by Selecting the Object to Be Dimensioned (See Figure 8-6) --
To Change the Default Dimension Text --
Text Option --
To Change the Default Dimension Text --
Mtext Option --
To Edit an Existing Dimension --
8-4.Dimension Styles --
To Change the Scale of a Drawing --
To Use the Text Option --
8-5.Units --
To Prevent a 0 from Appearing to the Left of the Decimal Point --
To Change the Number of Decimal Places in a Dimension Value --
8-6.Aligned Dimensions (See Figures 8-29 and 8-30) --
To Create an Aligned Dimension --
The Select Object Option --
8-7.Radius and Diameter Dimensions --
To Create a Radius Dimension --
To Alter the Default Dimension Note continued: To Remove the Center Mark from a Radius Dimension --
To Create a Diameter Dimension --
To Add Linear Dimensions to Given Centerlines --
8-8.Angular Dimensions --
To Create an Angular Dimension (See Figure 8-42) --
Avoid Overdimensioning --
8-9.Ordinate Dimensions --
To Move the Origin and the Origin Icon (See Figure 8-46) --
To Add Ordinate Dimensions to an Object --
8-10.Baseline Dimensions --
To Use the Baseline Dimension Tool (See Figure 8-50) --
8-11.Continue Dimension --
To Use the Continue Dimension Command (See Figure 8-51) --
8-12.Quick Dimension --
To Use the Quick Dimension Command --
8-13.Center Mark --
To Add Centerlines to a Given Circle --
8-14.Mleader and Qleader --
To Create a Leader Line with Text --
To Draw a Curved Leader Line --
To Draw a Leader Line with a Dot at Its End --
8-15.Text Angle --
To Change the Angle of a Dimension Text --
8-16.Tolerances --
8-17.Dimensioning Holes --
To Dimension Individual Holes Note continued: To Dimension Hole Patterns --
8-18.Placing Dimensions --
8-19.Fillets and Rounds --
8-20.Rounded Shapes (Internal) --
8-21.Rounded Shapes (External) --
8-22.Irregular Surfaces --
8-23.Polar Dimensions --
8-24.Chamfers --
8-25.Knurling --
8-26.Keys and Keyseats --
8-27.Symbols and Abbreviations --
8-28.Symmetry and Centerline --
8-29.Dimensioning to Points --
8-30.Coordinate Dimensions --
8-31.Sectional Views --
8-32.Orthographic Views --
8-33.Very Large Radii --
To Create a Radius for Large Radii --
8-34.Exercise Problems --
ch. 9 Tolerancing --
9-1.Introduction --
9-2.Direct Tolerance Methods --
9-3.Tolerance Expressions --
9-4.Understanding Plus and Minus Tolerances --
9-5.Creating Plus and Minus Tolerances with AutoCAD --
To Create Plus and Minus Tolerances by Using the Text Option --
To Create Plus and Minus Tolerances with the Text Override Tool --
To Use Dtext to Create a Plus and Minus Tolerance --
To Use the Dimension Style Tool Note continued: The Symmetrical Method --
The Deviation Method --
9-6.Limit Tolerances --
9-7.Creating Limit Tolerances by Using AutoCAD --
To Create a Limit Tolerance by Using the Dimension Style Manager --
To Modify an Existing Dimension into a Limit Tolerance --
9-8.Angular Tolerances --
To Set the Precision for Angular Dimensions and Tolerances --
To Create an Angular Dimension and Tolerance --
9-9.Standard Tolerances --
9-10.Double Dimensioning --
9-11.Chain Dimensions and Baseline Dimensions --
To Create Baseline Dimensions by Using AutoCAD --
9-12.Tolerance Studies --
To Calculate A's Maximum Length --
To Calculate A's Minimum Length --
9-13.Rectangular Dimensions --
9-14.Hole Locations --
9-15.Choosing a Shaft for a Toleranced Hole --
For Linear Dimensions and Tolerances --
9-16.Sample Problem SP9-1 --
9-17.Sample Problem SP9-2 --
9-18.Standard Fits (Metric Values) --
Clearance Fits --
Transition Fits --
Interference Fits --
9-19.Nominal Sizes Note continued: 9-20.Hole and Shaft Basis --
9-21.Sample Problem SP9-3 --
9-22.Standard Fits (Inch Values) --
Fits Defined by Using Inch Values Are Classified as Follows --
9-23.Sample Problem SP9-4 --
9-24.Preferred and Standard Sizes --
9-25.Surface Finishes --
9-26.Surface Control Symbols --
9-27.Design Problems --
Floating Condition --
Fixed Condition --
To Design a Hole Given a Fastener Size --
9-28.Exercise Problems --
ch. 10 Geometric Tolerances --
10-1.Introduction --
10-2.Tolerances of Form --
10-3.Flatness --
10-4.Straightness --
10-5.Straightness (RFS and MMC) --
10-6.Circularity --
10-7.Cylindricity --
10-8.Geometric Tolerances Created by Using AutoCAD --
To Define a Datum --
To Define a Straightness Value --
To Create a Positional Tolerance --
To Create a Basic Dimension --
To Create Basic Dimensions from Existing Dimensions --
To Add a Limit Feature Tolerance to a Hole --
To Add a Positional Tolerance to the Hole's Feature Tolerance Note continued: To Add a Geometric Tolerance with a Leader Line --
10-9.Tolerances of Orientation --
10-10.Datums --
10-11.Perpendicularity --
10-12.Parallelism --
10-13.Angularism --
10-14.Profiles --
10-15.Runouts --
10-16.Positional Tolerances --
10-17.Virtual Condition --
To Calculate the Virtual Condition for a Shaft --
To Calculate the Virtual Condition for a Hole --
10-18.Floating Fasteners --
10-19.Sample Problem SP10-1 --
10-20.Sample Problem SP10-2 --
10-21.Fixed Fasteners --
10-22.Sample Problem SP10-3 --
10-23.Design Problems --
10-24.Exercise Problems --
ch. 11 Threads and Fasteners --
11-1.Introduction --
11-2.Thread Terminology --
11-3.Thread Callouts (Metric Units) --
11-4.Thread Callouts (English Units) --
11-5.Thread Representations --
To Draw a Detailed Thread Representation --
To Create an Internal Detailed Thread Representation in a Sectional View --
To Create a Schematic Thread Representation Note continued: To Create an Internal Schematic Thread Representation --
To Create a Simplified Thread Representation --
11-6.Orthographic Views of Internal Threads --
11-7.Sectional Views of Internal Thread Representations --
11-8.Types of Threads --
11-9.How to Draw an External Square Thread --
11-10.How to Draw an Internal Square Thread --
11-11.How to Draw an External Acme Thread --
11-12.Bolts and Nuts --
11-13.Screws --
11-14.Studs --
11-15.Head Shapes --
To Draw a Hexagon-Shaped (Hex) Head --
To Draw a Square-Shaped Head --
11-16.Nuts --
To Draw a Hexagon-Shaped Finished Nut --
To Draw a Locking Nut --
11-17.Sample Problem SP11-1 --
11-18.Sample Problem SP11-2 --
11-19.Standard Screws --
11-20.Setscrews --
11-21.Washers --
To Draw a Plain Washer (See Figure 11-35) --
11-22.Keys --
11-23.Rivets --
11-24.Springs --
To Draw a Detailed Representation of an Extension Spring --
To Draw a Detailed Representation of a Compression Spring --
11-25.Tool Palettes Note continued: To Create a Shoulder Screw --
To Change the Scale of a Tool Palette Block --
To Modify the Block --
11-26.Exercise Problems --
ch. 12 Working Drawings --
12-1.Introduction --
12-2.Assembly Drawings --
12-3.Drawing Formats (Templates) --
To Add a Drawing Template --
12-4.Title Block --
Drawing Titles (Names) --
Drawing Numbers --
Company Name --
Scale --
Release Date --
Sheet --
12-5.Revision Block --
12-6.Tolerance Block --
12-7.Release Block --
Drawn --
Checked --
Design --
Stress/Wts --
Materials --
Customer --
12-8.Parts List (Bill of Materials --
BOM) --
12-9.Detail Drawings --
12-10.First-Angle Projection --
12-11.Drawing Notes --
12-12.Design Layouts --
12-13.Sample Problem SP12-1 --
To Create the Design Layout (See Figure 12-29) --
To Create a Drawing Using Layers --
To Create a Drawing from a Layout --
12-14.Sample Problem SP12-2 --
To Create an Assembly Drawing --
12-15.Sample Problem SP12-3 --
12-16.Exercise Problems Note continued: ch. 13 Gears, Bearings, and Cams --
13-1.Introduction --
13-2.Types of Gears --
13-3.Gear Terminology --
Spur --
For Spur Gears Using English Units --
For Spur Gears Using Metric Units --
13-4.Spur Gear Drawings --
13-5.Sample Problem SP13-1 --
13-6.Sample Problem SP13-2 --
To Draw Meshing Spur Gears (See Figure 13-9B) --
13-7.Sample Problem SP13-3 --
13-8.Selecting Spur Gears --
13-9.Center Distance Between Gears --
13-10.Sample Problem SP13-4 --
13-11.Combining Spur Gears --
13-12.Gear Terminology --
Bevel --
13-13.How to Draw Bevel Gears --
To Draw a Matched Set of Beveled Gears --
13-14.Worm Gears --
13-15.Helical Gears --
13-16.Racks --
13-17.Ball Bearings --
13-18.Sample Problem SP13-5 --
13-19.Bushings --
13-20.Sample Problem SP13-6 --
13-21.Cam Displacement Diagrams --
To Set Up a Displacement Diagram --
13-22.Cam Motions --
Uniform Motion --
Modified Uniform Motion --
Harmonic Motion --
Uniform Acceleration and Deceleration Note continued: 13-23.Cam Followers --
13-24.Sample Problem SP13-7 --
13-25.Exercise Problems --
ch. 14 Fundamentals of 3D Drawing --
14-1.Introduction --
14-2.The World Coordinate System --
To Change the Background Color to White --
14-3.Viewpoints --
To Change the Viewpoint by Using the Views Panel --
To Change the Viewpoint by Using the View Command --
To Return to the Original WCS Orientation --
14-4.Perspective and Parallel Grids --
To Create a Drawing with a Perspective Grid --
To Return to the 2D WCS --
14-5.3D Modeling --
To Access the 3D Modeling Mode --
14-6.User Coordinate System (UCS) --
To Draw a Solid Box --
To Create a UCS on the Top Surface --
To Save a UCS --
To Return to the WCS --
To Return to a Saved UCS --
To Define a UCS by Using the 3-Point Tool --
14-7.Editing a Solid Model --
To Change the Length and Width of a Solid Model --
14-8.Visual Styles --
To Change Visual Styles --
14-9.Rotating a UCS Axis --
To Rotate About the X-Axis Note continued: 14-10.Sample Problem SP14-1 --
14-11.Visual Errors --
To Change Views --
14-12.Sample Problem SP14-2 --
To Draw a Circle on the Upper Front Surface --
To Draw a Rectangle on the Top Surface --
To Draw an Ellipse on the Left Vertical Surface --
14-13.Orthographic Views --
To Create Four Viewports --
To Create Orthographic Views --
14-14.Line Thickness --
To Use the Thickness Command --
To Draw a Curve by Using Thickness (See Figure 14-46) --
14-15.Using the Thickness Command to Create Objects --
To Draw the Box --
To Create a New UCS --
To Draw the Right Cylinder --
To Draw the Top Cylinder --
To Return the Drawing to Its Original Settings --
14-16.Exercise Problems --
ch. 15 Modeling --
15-1.Introduction --
15-2.Box --
To Draw a Box by Using the Corner Option (See Figure 15-2) --
To Change the Visual Style --
To Draw a Box from Given Dimensions --
To Draw a Cube (See Figure 15-5) --
To Use Dynamic Grips --
15-3.Sphere Note continued: To Draw a Sphere (See Figure 15-7) --
15-4.Cylinder --
To Draw a Cylinder with a Circular Base --
To Draw a Cylinder with an Elliptical Base --
15-5.Cone --
To Draw a Cone with an Elliptical Base (See Figure 15-10) --
To Draw a Cone with a Circular Base (See Figure 15-11) --
15-6.Wedge --
To Draw a Wedge by Defining Its Corner Point (See Figure 15-13) --
To Draw a Wedge by Defining Its Center Point (See Figure 15-14) --
To Align a Wedge with an Existing Wedge --
15-7.Torus --
To Draw a Torus --
15-8.Extrude --
To Extrude a 2D Polyline --
To Create a Polyline from Line Segments --
15-9.Revolve --
To Create a Revolved Solid Object --
15-10.Helix --
15-11.Polysolid --
15-12.Loft --
15-13.Intersect --
15-14.Union and Subtract --
To Union Two Objects --
To Subtract an Object --
15-15.Solid Modeling and UCSs --
15-16.Combining Solid Objects --
To Set Up the Drawing --
To Draw the First Box --
To Create the Internal Open Volume --
To Create the Top Cutout Note continued: To Create a Box --
To Create a Wedge --
15-17.Intersecting Solids --
To Set Up the Drawing --
To Draw the Cone --
To Draw the Cylinder --
To Complete the 3D Drawing --
To Create the Viewports for the Orthographic Views --
15-18.Solid Models of Castings --
To Draw the Basic Shape --
To Create a Polyline from the Basic Shape --
To Extrude the Shape --
To Add the Holes --
To Create the Rounded Edges --
15-19.Thread Representations in Solid Models --
15-20.List --
15-21.Massprop --
15-22.Face and Edge Editing --
To Extrude a Face (See Figure 15-65) --
To Extrude a Face Along a Path --
To Extrude Two Faces at the Same Time (See Figure 15-67) --
To Move a Face (See Figure 15-68) --
To Offset Faces (See Figure 15-69) --
To Rotate a Face (See Figure 15-70) --
To Taper a Face --
To Copy a Face --
To Copy Edges (See Figure 15-73) --
To Imprint an Object (See Figure 15-74) --
15-23.Exercise Problems --
Appendix --
A-1.Wire and Sheet Metal Gauges Note continued: A-2.American Standard Clearance Locational Fits --
A-3.American Standard Running and Sliding Fits --
A-4.American Standard Transition Locational Fits --
A-5.American Standard Interference Locational Fits --
A-6.American Standard Force and Shrink Fits --
A-7.Preferred Clearance Fits --
Cylindrical Fits --
A-8.Preferred Transition and Interference Fits --
Cylindrical Fits --
A-9.Preferred Clearance Fits --
Cylindrical Fits --
A-10.Preferred Transition and Interference Fits --
Cylindrical Fits --
A-11.American National Standard Type A Plain Washers --
A-12.American National Standard Helical Spring Lock Washers --
A-13.American National Standard Internal --
External Tooth Lock Washers --
A-14.British Standard Bright Metal Washers --
Metric Series --
A-15.American National Standard and Unified Standard Square Bolts --
A-16.American National Standard and Unified Standard Hex Head Screws --
A-17.Coarse-Thread Series, UNC, UNRC, and NC --
Basic Dimensions Note continued: A-18.Fine-Thread Series, UNC, UNRC, and NC --
Basic Dimensions --
A-19.American National Standard General-Purpose Acme Screw Thread Form --
Basic Dimensions --
A-20.60° Stub Threads --
A-21.American National Standard Slotted 100° Flat Countersunk Head Machine Screws --
A-22.American National Standard Slotted Truss Head Machine Screws --
A-23.American National Standard Plain and Slotted Hexagon Head Machine Screws --
A-24.Slotted Round Head Machine Screws --
A-25.American National Standard Square Head Setscrews --
A-26.American National Standard Square Head Setscrews --
A-27.American National Standard Slotted Headless Setscrews --
A-28.Lengths for Threaded Fasteners --
A-29.Lengths for Metric Threaded Fasteners --
A-30.American National Standard Square and Hexagon Machine Screw Nuts --
A-31.Standard Twist Drill Sizes (Inches) --
A-32.Standard Twist Drill Sizes (Millimeters) --
A-33.Metric Threads --
Preferred Sizes --
A-34.Standard Thread Sizes --
Inches Note continued: A-35.Thread Lengths --
A-36.Fasteners --
Standard Lengths --
A-37.American National Standard Plain Washers --
A-38.Flat Washers --
Metric Sizes.
Responsibility: James D. Bethune.

Abstract:

This book teaches students technical drawing using AutoCAD 2015 as its drawing instrument, complying with ANSI standards. Taking a step-by-step approach, it encourages students to work at their own pace and uses sample problems and illustrations to guide them through the powerful features of this drawing program. Nearly 150 exercise problems provide instructors with a variety of assignment material and students with an opportunity to develop their creativity and problem-solving capabilities.

Reviews

User-contributed reviews
Retrieving GoodReads reviews...
Retrieving DOGObooks reviews...

Tags

Be the first.

Similar Items

Related Subjects:(2)

Confirm this request

You may have already requested this item. Please select Ok if you would like to proceed with this request anyway.

Linked Data


Primary Entity

<http://www.worldcat.org/oclc/877853353> # Engineering graphics with AutoCAD 2015
    a schema:Book, schema:CreativeWork ;
    library:oclcnum "877853353" ;
    library:placeOfPublication <http://id.loc.gov/vocabulary/countries/mau> ;
    schema:about <http://dewey.info/class/620.0042028553/e23/> ;
    schema:about <http://experiment.worldcat.org/entity/work/data/4163353342#CreativeWork/autocad> ; # AutoCAD.
    schema:about <http://experiment.worldcat.org/entity/work/data/4163353342#Topic/engineering_graphics> ; # Engineering graphics
    schema:author <http://experiment.worldcat.org/entity/work/data/4163353342#Person/bethune_james_d_1941> ; # James D. Bethune
    schema:bookFormat bgn:PrintBook ;
    schema:datePublished "2015" ;
    schema:description "Note continued: To Add a Geometric Tolerance with a Leader Line -- 10-9.Tolerances of Orientation -- 10-10.Datums -- 10-11.Perpendicularity -- 10-12.Parallelism -- 10-13.Angularism -- 10-14.Profiles -- 10-15.Runouts -- 10-16.Positional Tolerances -- 10-17.Virtual Condition -- To Calculate the Virtual Condition for a Shaft -- To Calculate the Virtual Condition for a Hole -- 10-18.Floating Fasteners -- 10-19.Sample Problem SP10-1 -- 10-20.Sample Problem SP10-2 -- 10-21.Fixed Fasteners -- 10-22.Sample Problem SP10-3 -- 10-23.Design Problems -- 10-24.Exercise Problems -- ch. 11 Threads and Fasteners -- 11-1.Introduction -- 11-2.Thread Terminology -- 11-3.Thread Callouts (Metric Units) -- 11-4.Thread Callouts (English Units) -- 11-5.Thread Representations -- To Draw a Detailed Thread Representation -- To Create an Internal Detailed Thread Representation in a Sectional View -- To Create a Schematic Thread Representation"@en ;
    schema:description "This book teaches students technical drawing using AutoCAD 2015 as its drawing instrument, complying with ANSI standards. Taking a step-by-step approach, it encourages students to work at their own pace and uses sample problems and illustrations to guide them through the powerful features of this drawing program. Nearly 150 exercise problems provide instructors with a variety of assignment material and students with an opportunity to develop their creativity and problem-solving capabilities."@en ;
    schema:description "Note continued: 2-26.Fillet -- To Draw a Fillet -- 2-27.Table -- To Create a Table -- 2-28.Exercise Problems -- ch. 3 Advanced Commands -- 3-1.Introduction -- 3-2.Osnap -- To Access the Osnap Commands -- To Turn Osnap On -- To Change the Size of the Osnap Cursor Box -- 3-3.Osnap -- Endpoint -- To Snap to the Endpoint of an Existing Line -- 3-4.Osnap -- Snap From -- To Move a Line -- To Change the Angle and Length of a Line -- To Apply the Snap From Option to a Circle -- 3-5.Osnap -- Midpoint -- To Draw a Circle About the Midpoint of a Line -- 3-6.Osnap -- Intersection -- To Use the Osnap Intersection Command to Define an Ellipse -- 3-7.Osnap -- Apparent Intersection -- To Draw a Circle Centered About an Apparent Intersection -- 3-8.Osnap -- Center -- To Draw a Line to the Center Point of a Circle -- 3-9.Osnap -- Quadrant -- To Draw a Line to One of a Circle's Quadrant Points -- 3-10.Osnap -- Perpendicular -- To Draw a Line Perpendicular to a Line -- 3-11.Osnap -- Tangent"@en ;
    schema:description "Machine generated contents note: ch. 1 Getting Started -- 1-1.Introduction -- To Start a New Drawing -- An Alternative Method to Starting a New Drawing -- 1-2.Tabs and Panels -- To Access Additional Commands Within a Panel -- Help Boxes for Commands -- To Access Other Help Information -- 1-3.The Command Line Box -- To Enter a Diameter Value -- 1-4.Command Tools -- To Determine the Command That a Tool Represents -- 1-5.Starting a New Drawing -- 1-6.Naming a Drawing -- To Start a New Drawing -- To Save a New Drawing File -- 1-7.Drawing Units -- To Specify or to Change the Drawing Units -- To Specify or Change the Precision of the Units System -- To Specify or Change the Angle Units Value -- 1-8.Drawing Limits -- To Align the Drawing Limits with a Standard A3 (Metric) Paper Size -- 1-9.Grid and Snap -- To Set the Grid and Snap Values -- 1-10.Sample Problem SP1-1 -- To Specify the Drawing Units -- To Define the Drawing Precision -- To Calibrate the Sheet Size"@en ;
    schema:description "Note continued: To Draw a Sphere (See Figure 15-7) -- 15-4.Cylinder -- To Draw a Cylinder with a Circular Base -- To Draw a Cylinder with an Elliptical Base -- 15-5.Cone -- To Draw a Cone with an Elliptical Base (See Figure 15-10) -- To Draw a Cone with a Circular Base (See Figure 15-11) -- 15-6.Wedge -- To Draw a Wedge by Defining Its Corner Point (See Figure 15-13) -- To Draw a Wedge by Defining Its Center Point (See Figure 15-14) -- To Align a Wedge with an Existing Wedge -- 15-7.Torus -- To Draw a Torus -- 15-8.Extrude -- To Extrude a 2D Polyline -- To Create a Polyline from Line Segments -- 15-9.Revolve -- To Create a Revolved Solid Object -- 15-10.Helix -- 15-11.Polysolid -- 15-12.Loft -- 15-13.Intersect -- 15-14.Union and Subtract -- To Union Two Objects -- To Subtract an Object -- 15-15.Solid Modeling and UCSs -- 15-16.Combining Solid Objects -- To Set Up the Drawing -- To Draw the First Box -- To Create the Internal Open Volume -- To Create the Top Cutout"@en ;
    schema:description "Note continued: To Draw a Line Tangent to a Circle -- 3-12.Osnap -- Nearest -- To Draw a Line from a Point to the Nearest Selected Point on an Existing Line -- 3-13.Sample Problem SP3-1 -- 3-14.Sample Problem SP3-2 -- 3-15.Grips -- To Turn the Grips Function Off -- To Access the Grips Dialog Box -- 3-16.Grips -- Extend -- To Extend the Length of a Line (See Figure 3-24) -- 3-17.Grips -- Move -- To Move an Object by Using Grips (See Figure 3-25) -- 3-18.Grips -- Rotate -- To Rotate an Object by Using Grips (See Figure 3-26) -- 3-19.Grips -- Scale -- To Change the Scale of an Object (See Figure 3-27) -- 3-20.Grips -- Mirror -- To Mirror an Object (See Figure 3-28) -- 3-21.Blocks -- To Create a Block -- To Insert a Block -- To Change the Scale of a Block -- To Explode a Block -- 3-22.Working with Blocks -- To Insert Blocks at Different Angles -- To Insert Blocks with Different Scale Factors -- To Use the Insert Dialog Box to Change the Shape of a Block -- To Combine Blocks"@en ;
    schema:description "Note continued: Some Dimensioning Conventions (See Figure 8-3) -- Some Common Errors to Avoid (See Figure 8-4) -- 8-3.Linear Dimension -- To Create a Horizontal Dimension by Selecting Extension Line Locations or Origins (See Figure 8-5) -- To Create a Vertical Dimension -- To Create a Horizontal Dimension by Selecting the Object to Be Dimensioned (See Figure 8-6) -- To Change the Default Dimension Text -- Text Option -- To Change the Default Dimension Text -- Mtext Option -- To Edit an Existing Dimension -- 8-4.Dimension Styles -- To Change the Scale of a Drawing -- To Use the Text Option -- 8-5.Units -- To Prevent a 0 from Appearing to the Left of the Decimal Point -- To Change the Number of Decimal Places in a Dimension Value -- 8-6.Aligned Dimensions (See Figures 8-29 and 8-30) -- To Create an Aligned Dimension -- The Select Object Option -- 8-7.Radius and Diameter Dimensions -- To Create a Radius Dimension -- To Alter the Default Dimension"@en ;
    schema:description "Note continued: 9-20.Hole and Shaft Basis -- 9-21.Sample Problem SP9-3 -- 9-22.Standard Fits (Inch Values) -- Fits Defined by Using Inch Values Are Classified as Follows -- 9-23.Sample Problem SP9-4 -- 9-24.Preferred and Standard Sizes -- 9-25.Surface Finishes -- 9-26.Surface Control Symbols -- 9-27.Design Problems -- Floating Condition -- Fixed Condition -- To Design a Hole Given a Fastener Size -- 9-28.Exercise Problems -- ch. 10 Geometric Tolerances -- 10-1.Introduction -- 10-2.Tolerances of Form -- 10-3.Flatness -- 10-4.Straightness -- 10-5.Straightness (RFS and MMC) -- 10-6.Circularity -- 10-7.Cylindricity -- 10-8.Geometric Tolerances Created by Using AutoCAD -- To Define a Datum -- To Define a Straightness Value -- To Create a Positional Tolerance -- To Create a Basic Dimension -- To Create Basic Dimensions from Existing Dimensions -- To Add a Limit Feature Tolerance to a Hole -- To Add a Positional Tolerance to the Hole's Feature Tolerance"@en ;
    schema:description "Note continued: The Symmetrical Method -- The Deviation Method -- 9-6.Limit Tolerances -- 9-7.Creating Limit Tolerances by Using AutoCAD -- To Create a Limit Tolerance by Using the Dimension Style Manager -- To Modify an Existing Dimension into a Limit Tolerance -- 9-8.Angular Tolerances -- To Set the Precision for Angular Dimensions and Tolerances -- To Create an Angular Dimension and Tolerance -- 9-9.Standard Tolerances -- 9-10.Double Dimensioning -- 9-11.Chain Dimensions and Baseline Dimensions -- To Create Baseline Dimensions by Using AutoCAD -- 9-12.Tolerance Studies -- To Calculate A's Maximum Length -- To Calculate A's Minimum Length -- 9-13.Rectangular Dimensions -- 9-14.Hole Locations -- 9-15.Choosing a Shaft for a Toleranced Hole -- For Linear Dimensions and Tolerances -- 9-16.Sample Problem SP9-1 -- 9-17.Sample Problem SP9-2 -- 9-18.Standard Fits (Metric Values) -- Clearance Fits -- Transition Fits -- Interference Fits -- 9-19.Nominal Sizes"@en ;
    schema:description "Note continued: 14-10.Sample Problem SP14-1 -- 14-11.Visual Errors -- To Change Views -- 14-12.Sample Problem SP14-2 -- To Draw a Circle on the Upper Front Surface -- To Draw a Rectangle on the Top Surface -- To Draw an Ellipse on the Left Vertical Surface -- 14-13.Orthographic Views -- To Create Four Viewports -- To Create Orthographic Views -- 14-14.Line Thickness -- To Use the Thickness Command -- To Draw a Curve by Using Thickness (See Figure 14-46) -- 14-15.Using the Thickness Command to Create Objects -- To Draw the Box -- To Create a New UCS -- To Draw the Right Cylinder -- To Draw the Top Cylinder -- To Return the Drawing to Its Original Settings -- 14-16.Exercise Problems -- ch. 15 Modeling -- 15-1.Introduction -- 15-2.Box -- To Draw a Box by Using the Corner Option (See Figure 15-2) -- To Change the Visual Style -- To Draw a Box from Given Dimensions -- To Draw a Cube (See Figure 15-5) -- To Use Dynamic Grips -- 15-3.Sphere"@en ;
    schema:description "Note continued: 3-23.Wblock -- To Create a Wblock -- To Verify that a Wblock Has Been Created -- To Change the Size of a Wblock -- 3-24.Layers -- To Create New Layers -- To Change the Color and Linetype of a Layer -- To Draw on Different Layers -- To Change Layers -- To Change the Scale of a Linetype -- To Use the Match Tool -- To Turn Layers Off -- 3-25.Attributes -- To Add an Attribute to a Block -- To Create a New Block that Includes Attributes -- To Insert an Existing Block with Attributes -- To Edit an Existing Attribute -- 3-26.Title Blocks with Attributes -- 3-27.Edit Polyline -- To Create a Spline from a Given Polyline -- 3-28.Edit Spline -- To Edit a Spline -- 3-29.Edit Text -- To Change Existing Text -- 3-30.Constructing the Bisector of an Angle -- Method I -- 3-31.Constructing the Bisector of an Angle -- Method II -- 3-32.Constructing an Ogee Curve (S-Curve) with Equal Arcs -- 3-33.Constructing a Parabola -- 3-34.Constructing a Hyperbola"@en ;
    schema:description "Note continued: 13-23.Cam Followers -- 13-24.Sample Problem SP13-7 -- 13-25.Exercise Problems -- ch. 14 Fundamentals of 3D Drawing -- 14-1.Introduction -- 14-2.The World Coordinate System -- To Change the Background Color to White -- 14-3.Viewpoints -- To Change the Viewpoint by Using the Views Panel -- To Change the Viewpoint by Using the View Command -- To Return to the Original WCS Orientation -- 14-4.Perspective and Parallel Grids -- To Create a Drawing with a Perspective Grid -- To Return to the 2D WCS -- 14-5.3D Modeling -- To Access the 3D Modeling Mode -- 14-6.User Coordinate System (UCS) -- To Draw a Solid Box -- To Create a UCS on the Top Surface -- To Save a UCS -- To Return to the WCS -- To Return to a Saved UCS -- To Define a UCS by Using the 3-Point Tool -- 14-7.Editing a Solid Model -- To Change the Length and Width of a Solid Model -- 14-8.Visual Styles -- To Change Visual Styles -- 14-9.Rotating a UCS Axis -- To Rotate About the X-Axis"@en ;
    schema:description "Note continued: To Set the Grid and Snap Values -- 1-11.Save and Save As -- To Use the Save and Save As Commands -- 1-12.Open -- To Use the Open Command -- 1-13.Close -- 1-14.Exercise Problems -- ch. 2 Fundamentals of 2D Construction -- 2-1.Introduction -- 2-2.Line -- Random Points -- To Randomly Select Points (See Figure 2-2) -- To Exit a Command Sequence -- To Create a Closed Area (See Figure 2-4) -- 2-3.Erase -- To Erase Individual Lines -- To Erase a Group of Lines Simultaneously (See Figure 2-6) -- 2-4.Line -- Snap Points -- Problem: Draw a 3" [×] 5" Rectangle -- 2-5.Line -- Dynamic Inputs -- To Create Lines by Using Dynamic Input -- To Access the Dynamic Input Settings -- 2-6.Construction Line -- Other Construction Line Commands: Hor Ver Ang -- Other Construction Line Command: Offset -- 2-7.Circle -- To Draw a Circle -- Radius (See Figure 2-14) -- To Draw a Circle -- Diameter (See Figure 2-14) -- To Draw a Circle -- 2 Points (See Figure 2-15)"@en ;
    schema:description "Note continued: To Dimension Hole Patterns -- 8-18.Placing Dimensions -- 8-19.Fillets and Rounds -- 8-20.Rounded Shapes (Internal) -- 8-21.Rounded Shapes (External) -- 8-22.Irregular Surfaces -- 8-23.Polar Dimensions -- 8-24.Chamfers -- 8-25.Knurling -- 8-26.Keys and Keyseats -- 8-27.Symbols and Abbreviations -- 8-28.Symmetry and Centerline -- 8-29.Dimensioning to Points -- 8-30.Coordinate Dimensions -- 8-31.Sectional Views -- 8-32.Orthographic Views -- 8-33.Very Large Radii -- To Create a Radius for Large Radii -- 8-34.Exercise Problems -- ch. 9 Tolerancing -- 9-1.Introduction -- 9-2.Direct Tolerance Methods -- 9-3.Tolerance Expressions -- 9-4.Understanding Plus and Minus Tolerances -- 9-5.Creating Plus and Minus Tolerances with AutoCAD -- To Create Plus and Minus Tolerances by Using the Text Option -- To Create Plus and Minus Tolerances with the Text Override Tool -- To Use Dtext to Create a Plus and Minus Tolerance -- To Use the Dimension Style Tool"@en ;
    schema:description "Note continued: 3-35.Constructing a Spiral -- 3-36.Constructing a Helix -- 3-37.Designing by Using Shape Parameters -- Design Problem DP3-1 -- Design Problem DP3-2 -- 3-38.Exercise Problems -- ch. 4 Sketching -- 4-1.Introduction -- 4-2.Establishing Your Own Style -- 4-3.Graph Paper -- 4-4.Pencils -- 4-5.Lines -- 4-6.Proportions -- 4-7.Curves -- 4-8.Sample Problem SP4-1 -- 4-9.Isometric Sketches -- 4-10.Sample Problem SP4-2 -- 4-11.Oblique Sketches -- 4-12.Perspective Sketches -- 4-13.Working in Different Orientations -- 4-14.Exercise Problems -- ch. 5 Orthographic Views -- 5-1.Introduction -- 5-2.Three Views of an Object -- 5-3.Visualization -- To Draw a Three-Dimensional Box -- 5-4.Hidden Lines -- 5-5.Hidden Line Conventions -- 5-6.Drawing Hidden Lines -- To Add Hidden Linetypes to the Drawing -- To Create a Hidden Layer for General Use -- To Change Layers -- 5-7.Precedence of Lines -- 5-8.Slanted Surfaces -- 5-9.Projection Between Views -- 5-10.Sample Problem SP5-1"@en ;
    schema:description "Note continued: ch. 7 Auxiliary Views -- 7-1.Introduction -- 7-2.Projection Between Normal and Auxiliary Views -- To Rotate the Drawing's Axis System (See Figure 7-6) -- 7-3.Sample Problem SP7-1 -- 7-4.Transferring Lines Between Views -- To Measure the Length of a Line -- To Grip and Move a Line (See Figure 7-10) -- To Rotate and Move a Line -- 7-5.Sample Problem SP7-2 -- 7-6.Projecting Rounded Surfaces -- 7-7.Sample Problem SP7-3 -- 7-8.Projecting Irregular Surfaces -- 7-9.Sample Problem SP7-4 -- 7-10.Sample Problem SP7-5 -- 7-11.Partial Auxiliary Views -- 7-12.Sectional Auxiliary Views -- 7-13.Auxiliary Views of Oblique Surfaces -- 7-14.Secondary Auxiliary Views -- To Draw the First Auxiliary View -- To Draw the Secondary Auxiliary View -- 7-15.Sample Problem SP7-6 -- 7-16.Secondary Auxiliary View of an Ellipse -- 7-17.Exercise Problems -- ch. 8 Dimensioning -- 8-1.Introduction -- 8-2.Terminology and Conventions -- Some Common Terms (See Figure 8-2)"@en ;
    schema:description "Note continued: A-18.Fine-Thread Series, UNC, UNRC, and NC -- Basic Dimensions -- A-19.American National Standard General-Purpose Acme Screw Thread Form -- Basic Dimensions -- A-20.60° Stub Threads -- A-21.American National Standard Slotted 100° Flat Countersunk Head Machine Screws -- A-22.American National Standard Slotted Truss Head Machine Screws -- A-23.American National Standard Plain and Slotted Hexagon Head Machine Screws -- A-24.Slotted Round Head Machine Screws -- A-25.American National Standard Square Head Setscrews -- A-26.American National Standard Square Head Setscrews -- A-27.American National Standard Slotted Headless Setscrews -- A-28.Lengths for Threaded Fasteners -- A-29.Lengths for Metric Threaded Fasteners -- A-30.American National Standard Square and Hexagon Machine Screw Nuts -- A-31.Standard Twist Drill Sizes (Inches) -- A-32.Standard Twist Drill Sizes (Millimeters) -- A-33.Metric Threads -- Preferred Sizes -- A-34.Standard Thread Sizes -- Inches"@en ;
    schema:description "Note continued: 5-11.Compound Lines -- 5-12.Sample Problem SP5-2 -- 5-13.Oblique Surfaces -- 5-14.Sample Problem SP5-3 -- 5-15.Rounded Surfaces -- 5-16.Sample Problem SP5-4 -- 5-17.Holes -- 5-18.Holes in Slanted Surfaces -- To Draw an Ellipse Representing a Projected Hole -- To Draw Three Views of a Hole in a Slanted Surface -- To Draw Three Views of a Hole Through an Oblique Surface -- 5-19.Cylinders -- 5-20.Sample Problem SP5-5 -- 5-21.Cylinders with Slanted and Rounded Surfaces -- 5-22.Sample Problem SP5-6 -- 5-23.Drawing Conventions and Cylinders -- 5-24.Irregular Surfaces -- 5-25.Sample Problem SP5-7 -- 5-26.Hole Callouts -- To Draw a Countersunk Hole (See Figure 5-65) -- 5-27.Castings -- 5-28.Sample Problem SP5-8 -- 5-29.Thin-Walled Objects -- 5-30.Sample Problem SP5-9 -- 5-31.Intersections -- 5-32.Sample Problem SP5-10 -- 5-33.Sample Problem SP5-11 -- 5-34.Sample Problem SP5-12 -- 5-35.Designing by Modifying an Existing Part -- 5-36.Drawing Standards"@en ;
    schema:description "Note continued: To Remove the Center Mark from a Radius Dimension -- To Create a Diameter Dimension -- To Add Linear Dimensions to Given Centerlines -- 8-8.Angular Dimensions -- To Create an Angular Dimension (See Figure 8-42) -- Avoid Overdimensioning -- 8-9.Ordinate Dimensions -- To Move the Origin and the Origin Icon (See Figure 8-46) -- To Add Ordinate Dimensions to an Object -- 8-10.Baseline Dimensions -- To Use the Baseline Dimension Tool (See Figure 8-50) -- 8-11.Continue Dimension -- To Use the Continue Dimension Command (See Figure 8-51) -- 8-12.Quick Dimension -- To Use the Quick Dimension Command -- 8-13.Center Mark -- To Add Centerlines to a Given Circle -- 8-14.Mleader and Qleader -- To Create a Leader Line with Text -- To Draw a Curved Leader Line -- To Draw a Leader Line with a Dot at Its End -- 8-15.Text Angle -- To Change the Angle of a Dimension Text -- 8-16.Tolerances -- 8-17.Dimensioning Holes -- To Dimension Individual Holes"@en ;
    schema:description "Note continued: 5-37.Third- and First-Angle Projections -- 5-38.Exercise Problems -- ch. 6 Sectional Views -- 6-1.Introduction -- 6-2.Cutting Plane Lines -- To Draw a Cutting Plane Line -- Method I -- To Draw an Arrowhead -- To Change the Size of an Arrowhead -- To Draw a Cutting Plane Line -- Method II -- To Draw Cutting Plane Lines -- 6-3.Section Lines -- 6-4.Hatch -- To Hatch a Given Area -- To Change Hatch Patterns -- To Change the Spacing and Angle of a Hatch Pattern -- 6-5.Sample Problem SP6-1 -- 6-6.Styles of Section Lines -- 6-7.Sectional View Location -- 6-8.Holes in Sections -- 6-9.Gradients -- To Create a Gradient -- 6-10.Offset Sections -- 6-11.Multiple Sections -- 6-12.Aligned Sections -- 6-13.Drawing Conventions in Sections -- 6-14.Half, Partial, and Broken-Out Sectional Views -- To Draw a Broken Line -- 6-15.Removed Sectional Views -- 6-16.Breaks -- To Draw an S-Break (See Figure 6-40) -- 6-17.Sectional Views of Castings -- 6-18.Exercise Problems"@en ;
    schema:description "Note continued: To Create a Shoulder Screw -- To Change the Scale of a Tool Palette Block -- To Modify the Block -- 11-26.Exercise Problems -- ch. 12 Working Drawings -- 12-1.Introduction -- 12-2.Assembly Drawings -- 12-3.Drawing Formats (Templates) -- To Add a Drawing Template -- 12-4.Title Block -- Drawing Titles (Names) -- Drawing Numbers -- Company Name -- Scale -- Release Date -- Sheet -- 12-5.Revision Block -- 12-6.Tolerance Block -- 12-7.Release Block -- Drawn -- Checked -- Design -- Stress/Wts -- Materials -- Customer -- 12-8.Parts List (Bill of Materials -- BOM) -- 12-9.Detail Drawings -- 12-10.First-Angle Projection -- 12-11.Drawing Notes -- 12-12.Design Layouts -- 12-13.Sample Problem SP12-1 -- To Create the Design Layout (See Figure 12-29) -- To Create a Drawing Using Layers -- To Create a Drawing from a Layout -- 12-14.Sample Problem SP12-2 -- To Create an Assembly Drawing -- 12-15.Sample Problem SP12-3 -- 12-16.Exercise Problems"@en ;
    schema:description "Note continued: To Create a Box -- To Create a Wedge -- 15-17.Intersecting Solids -- To Set Up the Drawing -- To Draw the Cone -- To Draw the Cylinder -- To Complete the 3D Drawing -- To Create the Viewports for the Orthographic Views -- 15-18.Solid Models of Castings -- To Draw the Basic Shape -- To Create a Polyline from the Basic Shape -- To Extrude the Shape -- To Add the Holes -- To Create the Rounded Edges -- 15-19.Thread Representations in Solid Models -- 15-20.List -- 15-21.Massprop -- 15-22.Face and Edge Editing -- To Extrude a Face (See Figure 15-65) -- To Extrude a Face Along a Path -- To Extrude Two Faces at the Same Time (See Figure 15-67) -- To Move a Face (See Figure 15-68) -- To Offset Faces (See Figure 15-69) -- To Rotate a Face (See Figure 15-70) -- To Taper a Face -- To Copy a Face -- To Copy Edges (See Figure 15-73) -- To Imprint an Object (See Figure 15-74) -- 15-23.Exercise Problems -- Appendix -- A-1.Wire and Sheet Metal Gauges"@en ;
    schema:description "Note continued: ch. 13 Gears, Bearings, and Cams -- 13-1.Introduction -- 13-2.Types of Gears -- 13-3.Gear Terminology -- Spur -- For Spur Gears Using English Units -- For Spur Gears Using Metric Units -- 13-4.Spur Gear Drawings -- 13-5.Sample Problem SP13-1 -- 13-6.Sample Problem SP13-2 -- To Draw Meshing Spur Gears (See Figure 13-9B) -- 13-7.Sample Problem SP13-3 -- 13-8.Selecting Spur Gears -- 13-9.Center Distance Between Gears -- 13-10.Sample Problem SP13-4 -- 13-11.Combining Spur Gears -- 13-12.Gear Terminology -- Bevel -- 13-13.How to Draw Bevel Gears -- To Draw a Matched Set of Beveled Gears -- 13-14.Worm Gears -- 13-15.Helical Gears -- 13-16.Racks -- 13-17.Ball Bearings -- 13-18.Sample Problem SP13-5 -- 13-19.Bushings -- 13-20.Sample Problem SP13-6 -- 13-21.Cam Displacement Diagrams -- To Set Up a Displacement Diagram -- 13-22.Cam Motions -- Uniform Motion -- Modified Uniform Motion -- Harmonic Motion -- Uniform Acceleration and Deceleration"@en ;
    schema:description "Note continued: A-35.Thread Lengths -- A-36.Fasteners -- Standard Lengths -- A-37.American National Standard Plain Washers -- A-38.Flat Washers -- Metric Sizes."@en ;
    schema:description "Note continued: A-2.American Standard Clearance Locational Fits -- A-3.American Standard Running and Sliding Fits -- A-4.American Standard Transition Locational Fits -- A-5.American Standard Interference Locational Fits -- A-6.American Standard Force and Shrink Fits -- A-7.Preferred Clearance Fits -- Cylindrical Fits -- A-8.Preferred Transition and Interference Fits -- Cylindrical Fits -- A-9.Preferred Clearance Fits -- Cylindrical Fits -- A-10.Preferred Transition and Interference Fits -- Cylindrical Fits -- A-11.American National Standard Type A Plain Washers -- A-12.American National Standard Helical Spring Lock Washers -- A-13.American National Standard Internal -- External Tooth Lock Washers -- A-14.British Standard Bright Metal Washers -- Metric Series -- A-15.American National Standard and Unified Standard Square Bolts -- A-16.American National Standard and Unified Standard Hex Head Screws -- A-17.Coarse-Thread Series, UNC, UNRC, and NC -- Basic Dimensions"@en ;
    schema:description "Note continued: To Draw a Polygon -- Edge Distance (See Figure 2-31) -- 2-14.Point -- To Change the Shape of a Point (See Figure 2-32) -- To Change the Size of a Point (See Figure 2-32) -- 2-15.Text -- To Use the Multiline Text Tool (See Figures 2-33 Through 2-39) -- The Text Editor Panel -- To Access the Text Editor -- To Change Text Height -- To Change the Text Font -- To Justify Text -- To Justify the Text to the Right -- The Symbol Options -- Text Color -- 2-16.Move -- To Move an Object -- 2-17.Copy -- To Copy an Object -- To Draw Multiple Copies (See Figure 2-45) -- 2-18.Offset (See Figure 2-46) -- 2-19.Mirror (See Figure 2-47) -- 2-20.Array -- To Use the Rectangular Array Option -- To Use the Polar Array Option -- 2-21.Rotate -- To Rotate an Object (See Figure 2-51) -- 2-22.Trim -- To Use the Trim Command (See Figure 2-52) -- 2-23.Extend -- 2-24.Break -- To Use the Break Command -- To Use the First Point Option -- 2-25.Chamfer -- To Create a Chamfer"@en ;
    schema:description "Note continued: To Create an Internal Schematic Thread Representation -- To Create a Simplified Thread Representation -- 11-6.Orthographic Views of Internal Threads -- 11-7.Sectional Views of Internal Thread Representations -- 11-8.Types of Threads -- 11-9.How to Draw an External Square Thread -- 11-10.How to Draw an Internal Square Thread -- 11-11.How to Draw an External Acme Thread -- 11-12.Bolts and Nuts -- 11-13.Screws -- 11-14.Studs -- 11-15.Head Shapes -- To Draw a Hexagon-Shaped (Hex) Head -- To Draw a Square-Shaped Head -- 11-16.Nuts -- To Draw a Hexagon-Shaped Finished Nut -- To Draw a Locking Nut -- 11-17.Sample Problem SP11-1 -- 11-18.Sample Problem SP11-2 -- 11-19.Standard Screws -- 11-20.Setscrews -- 11-21.Washers -- To Draw a Plain Washer (See Figure 11-35) -- 11-22.Keys -- 11-23.Rivets -- 11-24.Springs -- To Draw a Detailed Representation of an Extension Spring -- To Draw a Detailed Representation of a Compression Spring -- 11-25.Tool Palettes"@en ;
    schema:description "Note continued: To Draw a Circle -- 3 Points (See Figure 2-15) -- To Draw a Circle -- Tangent Tangent Radius -- Quadrant-Sensitive Applications -- 2-8.Circle Centerlines -- To Change the Dimcen System Variable -- To Use the Center Mark Tool -- 2-9.Polyline -- To Draw a Polyline (See Figure 2-20) -- To Verify That a Polyline Is a Single Entity -- To Draw a Polyline: Arc (See Figure 2-21) -- Other Options with a Polyline Arc -- To Draw Different Line Thicknesses (See Figure 2-23) -- 2-10.Spline -- 2-11.Ellipse -- To Draw an Ellipse -- Axis Endpoint (See Figure 2-25) -- To Draw an Ellipse -- Center (See Figure 2-26) -- To Draw an Ellipse -- Arc (See Figure 2-27) -- To Draw an Ellipse by Defining Its Angle of Rotation About the Major Axis (See Figure 2-29) -- 2-12.Rectangle -- To Draw a Rectangle (See Figure 2-30) -- To Explode a Rectangle (See Figure 2-30) -- 2-13.Polygon -- To Draw a Polygon -- Center Point (See Figure 2-31)"@en ;
    schema:exampleOfWork <http://worldcat.org/entity/work/id/4163353342> ;
    schema:inLanguage "en" ;
    schema:name "Engineering graphics with AutoCAD 2015"@en ;
    schema:productID "877853353" ;
    schema:workExample <http://worldcat.org/isbn/9780133962208> ;
    umbel:isLike <http://bnb.data.bl.uk/id/resource/GBB4C5573> ;
    wdrs:describedby <http://www.worldcat.org/title/-/oclc/877853353> ;
    .


Related Entities

<http://experiment.worldcat.org/entity/work/data/4163353342#Person/bethune_james_d_1941> # James D. Bethune
    a schema:Person ;
    schema:birthDate "1941" ;
    schema:familyName "Bethune" ;
    schema:givenName "James D." ;
    schema:name "James D. Bethune" ;
    .

<http://experiment.worldcat.org/entity/work/data/4163353342#Topic/engineering_graphics> # Engineering graphics
    a schema:Intangible ;
    schema:name "Engineering graphics"@en ;
    .

<http://worldcat.org/isbn/9780133962208>
    a schema:ProductModel ;
    schema:isbn "0133962202" ;
    schema:isbn "9780133962208" ;
    .


Content-negotiable representations

Close Window

Please sign in to WorldCat 

Don't have an account? You can easily create a free account.