přejít na obsah
Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip Náhled dokumentu
ZavřítNáhled dokumentu
Probíhá kontrola...

Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip

Autor Jayadeep Gullapalli
Vydavatel: 2005.
Dizertace: Thesis (M.S.)--University of Louisville, 2005.
Vydání/formát:   Kvalifikační práce : Thesis/dissertation : Manuscript   Archival Material : English
Databáze:WorldCat
Shrnutí:
Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of  Přečíst více...
Hodnocení:

podle 1 hodnocení 1 zobrazit recenzi

Více podobných

 

Vyhledat exemplář v knihovně

&AllPage.SpinnerRetrieving; Vyhledávání knihoven, které vlastní tento dokument...

Detaily

Typ materiálu: Thesis/dissertation, Manuscript
Typ dokumentu: Book, Archival Material
Všichni autoři/tvůrci: Jayadeep Gullapalli
OCLC číslo: 70259384
Poznámky: Department of Electrical and Computer Engineering.
Vita.
"August 2005."
Popis: xi, 119 leaves : ill. (some col.) ; 29 cm.
Odpovědnost: by Jayadeep Gullapalli.

Anotace:

Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of electrochemical polymerization was used to immobilize glucose oxidase on the CE microchip. Polypyrrole was used an immobilization matrix. The second chapter describes the experimental procedure for the immobilization of glucose oxidase on the CE microchip device. A two-step procedure was employed, which involved a thin layer of polypyrrole followed by a thick layer of polypyrrole/glucose oxidase film. The third chapter deals with the results obtained using a CE microchip.

Recenze

Recenze vložené uživatelem

Recenze uživatele WorldCat (1)

Jayadeep Gullapalli

od p_joseph_kiran (Publikoval uživatel WorldCat 2013-01-18) Skvělé Trvalý odkaz

Hi Jayadeep,

Its Me Joseph Kiran (LFJC) your friend, contact me on <a href="mailto:kinni23@yahoo.com">kinni23@yahoo.com</a>

Its Me Joseph Kiran (LFJC) your friend, contact me on <a href="mailto:kinni23@yahoo.com">kinni23@yahoo.com</a>

Its Me Joseph Kiran (LFJC) your...
Přečíst více...  Přečíst více...

  • Byla pro vás tato recenze užitečná?
  •   
Nahrávání recenzí GoodReads...
Přebírání recenzí DOGO books...

Štítky

Štítky všech uživatelů (1)

Zobrazit nejoblíbenější štítky jako: seznam štítků | tag cloud

Potvrdit tento požadavek

Tento dokument jste si již vyžádali. Prosím vyberte Ok pokud chcete přesto v žádance pokračovat.

Propojená data


<http://www.worldcat.org/oclc/70259384>
library:oclcnum"70259384"
owl:sameAs<info:oclcnum/70259384>
rdf:typej.1:Thesis
rdf:typeschema:Book
schema:creator
schema:datePublished"2005"
schema:description"Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of electrochemical polymerization was used to immobilize glucose oxidase on the CE microchip. Polypyrrole was used an immobilization matrix. The second chapter describes the experimental procedure for the immobilization of glucose oxidase on the CE microchip device. A two-step procedure was employed, which involved a thin layer of polypyrrole followed by a thick layer of polypyrrole/glucose oxidase film. The third chapter deals with the results obtained using a CE microchip."
schema:exampleOfWork<http://worldcat.org/entity/work/id/57472707>
schema:inLanguage"en"
schema:name"Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip"
schema:url

Content-negotiable representations

Zavřít okno

Prosím přihlaste se do WorldCat 

Nemáte účet? Můžete si jednoduše vytvořit bezplatný účet.