omitir hasta el contenido
Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip Ver este material de antemano
CerrarVer este material de antemano
Chequeando…

Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip

Autor: Jayadeep Gullapalli
Editorial: 2005.
Disertación: Thesis (M.S.)--University of Louisville, 2005.
Edición/Formato:   Tesis/disertación : Tesis de maestría/doctorado : Manuscrito   Material de archivo : Inglés (eng)
Base de datos:WorldCat
Resumen:
Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of  Leer más
Calificación:

basada en 1 calificación/es 1 con una reseña

Más materiales como éste

 

Encontrar un ejemplar en la biblioteca

&AllPage.SpinnerRetrieving; Encontrando bibliotecas que tienen este material…

Detalles

Tipo de material: Tesis de maestría/doctorado, Manuscrito
Tipo de documento: Libro/Texto, Material de archivo
Todos autores / colaboradores: Jayadeep Gullapalli
Número OCLC: 70259384
Notas: Department of Electrical and Computer Engineering.
Vita.
"August 2005."
Descripción: xi, 119 leaves : ill. (some col.) ; 29 cm.
Responsabilidad: by Jayadeep Gullapalli.
Más información:

Resumen:

Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of electrochemical polymerization was used to immobilize glucose oxidase on the CE microchip. Polypyrrole was used an immobilization matrix. The second chapter describes the experimental procedure for the immobilization of glucose oxidase on the CE microchip device. A two-step procedure was employed, which involved a thin layer of polypyrrole followed by a thick layer of polypyrrole/glucose oxidase film. The third chapter deals with the results obtained using a CE microchip.

Reseñas

Reseñas contribuidas por usuarios

Reseñas de usuarios de WorldCat (1)

Jayadeep Gullapalli

por p_joseph_kiran (Publicadas por usuario de WorldCat 2013-01-18) Excelente Permalink

Hi Jayadeep,

Its Me Joseph Kiran (LFJC) your friend, contact me on <a href="mailto:kinni23@yahoo.com">kinni23@yahoo.com</a>

Its Me Joseph Kiran (LFJC) your friend, contact me on <a href="mailto:kinni23@yahoo.com">kinni23@yahoo.com</a>

Its Me Joseph Kiran (LFJC) your...
Leer más  Leer más

  • ¿Le fue útil esta reseña?
  •   
Recuperando reseñas de GoodReads…
Recuperando reseñas de DOGObooks…

Etiquetas

Todas las etiquetas de usuarios (1)

Ver etiquetas más populares como: lista de etiquetas | nube de etiquetas

Confirmar este pedido

Ya ha pedido este material. Escoja OK si desea procesar el pedido de todos modos.

Datos enlazados


<http://www.worldcat.org/oclc/70259384>
library:oclcnum"70259384"
owl:sameAs<info:oclcnum/70259384>
rdf:typej.1:Thesis
rdf:typeschema:Book
schema:creator
schema:datePublished"2005"
schema:description"Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of electrochemical polymerization was used to immobilize glucose oxidase on the CE microchip. Polypyrrole was used an immobilization matrix. The second chapter describes the experimental procedure for the immobilization of glucose oxidase on the CE microchip device. A two-step procedure was employed, which involved a thin layer of polypyrrole followed by a thick layer of polypyrrole/glucose oxidase film. The third chapter deals with the results obtained using a CE microchip."
schema:exampleOfWork<http://worldcat.org/entity/work/id/57472707>
schema:inLanguage"en"
schema:name"Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip"
schema:url

Content-negotiable representations

Cerrar ventana

Inicie una sesión con WorldCat 

¿No tienes una cuenta? Puede fácilmente crear una cuenta gratuita.