pular para conteúdo
Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip Ver prévia deste item
FecharVer prévia deste item
Checando...

Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip

Autor: Jayadeep Gullapalli
Editora: 2005.
Dissertação: Thesis (M.S.)--University of Louisville, 2005.
Edição/Formato   Tese/dissertação : Tese/dissertação : Manuscrito   Material de Arquivo : Inglês
Base de Dados:WorldCat
Resumo:
Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of  Ler mais...
Classificação:

baseado em 1 classificação(ões) 1 com uma crítica

Mais como este

 

Encontrar uma cópia na biblioteca

&AllPage.SpinnerRetrieving; Encontrando bibliotecas que possuem este item...

Detalhes

Tipo de Material: Tese/dissertação, Manuscrito
Tipo de Documento: Livro, Material de Arquivo
Todos os Autores / Contribuintes: Jayadeep Gullapalli
Número OCLC: 70259384
Notas: Department of Electrical and Computer Engineering.
Vita.
"August 2005."
Descrição: xi, 119 leaves : ill. (some col.) ; 29 cm.
Responsabilidade: by Jayadeep Gullapalli.

Resumo:

Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of electrochemical polymerization was used to immobilize glucose oxidase on the CE microchip. Polypyrrole was used an immobilization matrix. The second chapter describes the experimental procedure for the immobilization of glucose oxidase on the CE microchip device. A two-step procedure was employed, which involved a thin layer of polypyrrole followed by a thick layer of polypyrrole/glucose oxidase film. The third chapter deals with the results obtained using a CE microchip.

Críticas

Críticas contribuídas por usuários

Críticas de Usuários WorldCat (1)

Jayadeep Gullapalli

por p_joseph_kiran (Usuário WorldCat publicado 2013-01-18) Excelente Permalink

Hi Jayadeep,

Its Me Joseph Kiran (LFJC) your friend, contact me on <a href="mailto:kinni23@yahoo.com">kinni23@yahoo.com</a>

Its Me Joseph Kiran (LFJC) your friend, contact me on <a href="mailto:kinni23@yahoo.com">kinni23@yahoo.com</a>

Its Me Joseph Kiran (LFJC) your...
Ler mais...  Ler mais...

  • Esta crítica te ajudou?
  •   
Recuperando críticas GoodReas...
Recuperando comentários DOGObooks

Etiquetas

Etiquetas de todos os usuários (1)

Ver as etiquetas mais populares como: lista de etiquetas | nuvem de etiquetas

Confirmar esta solicitação

Você já pode ter solicitado este item. Por favor, selecione Ok se gostaria de proceder com esta solicitação de qualquer forma.

Dados Ligados


<http://www.worldcat.org/oclc/70259384>
library:oclcnum"70259384"
owl:sameAs<info:oclcnum/70259384>
rdf:typej.1:Thesis
rdf:typeschema:Book
schema:creator
schema:datePublished"2005"
schema:description"Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of electrochemical polymerization was used to immobilize glucose oxidase on the CE microchip. Polypyrrole was used an immobilization matrix. The second chapter describes the experimental procedure for the immobilization of glucose oxidase on the CE microchip device. A two-step procedure was employed, which involved a thin layer of polypyrrole followed by a thick layer of polypyrrole/glucose oxidase film. The third chapter deals with the results obtained using a CE microchip."
schema:exampleOfWork<http://worldcat.org/entity/work/id/57472707>
schema:inLanguage"en"
schema:name"Fabrication and characterization of polypyrrole/glucose oxidase electrode on a microfabricated capillary electrophoresis chip"
schema:url

Content-negotiable representations

Close Window

Por favor, conecte-se ao WorldCat 

Não tem uma conta? Você pode facilmente criar uma conta gratuita.