omitir hasta el contenido
Free vibration characteristics of rectangular cantilever plates. Ver este material de antemano
CerrarVer este material de antemano
Chequeando…

Free vibration characteristics of rectangular cantilever plates.

Autor: M V Barton; DEFENSE RESEARCH LAB UNIV OF TEXAS AUSTIN.
Editorial: Ft. Belvoir Defense Technical Information Center 24 MAY 1949.
Edición/Formato:   Print book : Inglés (eng)
Base de datos:WorldCat
Resumen:
As a step in the determination of the dynamic characteristics of missile fins, the frequencies and mode configurations of free vibration of uniform rectangular plates fixed along one edge are obtained for various (1/2, 1, 2, 5) cantilever span to chord ratios. Equations are set up in terms of influence coefficients and solved by matrix iteration. The Ritz method is also used in which the plate energies are expressed  Leer más
Calificación:

(todavía no calificado) 0 con reseñas - Ser el primero.

Temas
Más materiales como éste

 

Encontrar un ejemplar en la biblioteca

&AllPage.SpinnerRetrieving; Encontrando bibliotecas que tienen este material…

Detalles

Tipo de documento: Libro/Texto
Todos autores / colaboradores: M V Barton; DEFENSE RESEARCH LAB UNIV OF TEXAS AUSTIN.
Número OCLC: 227404825
Descripción: 17 p.

Resumen:

As a step in the determination of the dynamic characteristics of missile fins, the frequencies and mode configurations of free vibration of uniform rectangular plates fixed along one edge are obtained for various (1/2, 1, 2, 5) cantilever span to chord ratios. Equations are set up in terms of influence coefficients and solved by matrix iteration. The Ritz method is also used in which the plate energies are expressed in terms of beam functions corresponding to the normal modes of vibration of uniform beams. It is shown that the first plate bending (symmetric) frequency corresponds closely to that of a uniform cantilever beam modified to account for the plate flexural rigidity factor. The first torsional (antisymmetric) frequency varies almost linearly with plate length to breadth ratio. An empirical equation is developed for ease in determination of this frequency. Experimental spot checks on a square cantilever plate indicate agreement within 2 percent of theoretical values for the first two frequencies. (Author).

Reseñas

Reseñas contribuidas por usuarios
Recuperando reseñas de GoodReads…
Recuperando reseñas de DOGObooks…

Etiquetas

Ser el primero.
Confirmar este pedido

Ya ha pedido este material. Escoja OK si desea procesar el pedido de todos modos.

Datos enlazados


<http://www.worldcat.org/oclc/227404825>
library:oclcnum"227404825"
library:placeOfPublication
library:placeOfPublication
rdf:typeschema:Book
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:contributor
schema:contributor
schema:datePublished"24 MAY 1949"
schema:datePublished"1949"
schema:description"As a step in the determination of the dynamic characteristics of missile fins, the frequencies and mode configurations of free vibration of uniform rectangular plates fixed along one edge are obtained for various (1/2, 1, 2, 5) cantilever span to chord ratios. Equations are set up in terms of influence coefficients and solved by matrix iteration. The Ritz method is also used in which the plate energies are expressed in terms of beam functions corresponding to the normal modes of vibration of uniform beams. It is shown that the first plate bending (symmetric) frequency corresponds closely to that of a uniform cantilever beam modified to account for the plate flexural rigidity factor. The first torsional (antisymmetric) frequency varies almost linearly with plate length to breadth ratio. An empirical equation is developed for ease in determination of this frequency. Experimental spot checks on a square cantilever plate indicate agreement within 2 percent of theoretical values for the first two frequencies. (Author)."@en
schema:exampleOfWork<http://worldcat.org/entity/work/id/137132860>
schema:inLanguage"en"
schema:name"Free vibration characteristics of rectangular cantilever plates."@en
schema:numberOfPages"17"
schema:publication
schema:publisher
wdrs:describedby

Content-negotiable representations

Cerrar ventana

Inicie una sesión con WorldCat 

¿No tienes una cuenta? Puede fácilmente crear una cuenta gratuita.