컨텐츠로 이동
Free vibration characteristics of rectangular cantilever plates.
닫기해당 항목을 미리보기

Free vibration characteristics of rectangular cantilever plates.

저자: M V Barton; DEFENSE RESEARCH LAB UNIV OF TEXAS AUSTIN.
출판사: Ft. Belvoir Defense Technical Information Center 24 MAY 1949.
판/형식:  도서 : 영어
요약:
As a step in the determination of the dynamic characteristics of missile fins, the frequencies and mode configurations of free vibration of uniform rectangular plates fixed along one edge are obtained for various (1/2, 1, 2, 5) cantilever span to chord ratios. Equations are set up in terms of influence coefficients and solved by matrix iteration. The Ritz method is also used in which the plate energies are expressed  더 읽기…
평가:

(아무런 평가가 없습니다.) 0 리뷰와 함께 - 첫번째로 올려주세요.

 

도서관에서 사본 찾기

가져오는중… 해당항목을 보유하고 있는 도서관을 찾는 중

상세정보

문서 형식: 책
모든 저자 / 참여자: M V Barton; DEFENSE RESEARCH LAB UNIV OF TEXAS AUSTIN.
OCLC 번호: 227404825
설명: 17 p.

초록:

As a step in the determination of the dynamic characteristics of missile fins, the frequencies and mode configurations of free vibration of uniform rectangular plates fixed along one edge are obtained for various (1/2, 1, 2, 5) cantilever span to chord ratios. Equations are set up in terms of influence coefficients and solved by matrix iteration. The Ritz method is also used in which the plate energies are expressed in terms of beam functions corresponding to the normal modes of vibration of uniform beams. It is shown that the first plate bending (symmetric) frequency corresponds closely to that of a uniform cantilever beam modified to account for the plate flexural rigidity factor. The first torsional (antisymmetric) frequency varies almost linearly with plate length to breadth ratio. An empirical equation is developed for ease in determination of this frequency. Experimental spot checks on a square cantilever plate indicate agreement within 2 percent of theoretical values for the first two frequencies. (Author).

리뷰

사용자-기여 리뷰

태그

첫번째 되기
요청하신 것을 확인하기

이 항목을 이미 요청하셨을 수도 있습니다. 만약 이 요청을 계속해서 진행하시려면 Ok을 선택하세요.

링크된 데이터


<http://www.worldcat.org/oclc/227404825>
library:oclcnum"227404825"
library:placeOfPublication
library:placeOfPublication
owl:sameAs<info:oclcnum/227404825>
rdf:typeschema:Book
schema:about
schema:about
schema:about
schema:about
rdf:typeschema:Intangible
schema:name"(Guided missile components."
schema:about
schema:about
schema:about
schema:about
rdf:typeschema:Intangible
schema:name"Mathematical analysis."
schema:about
schema:contributor
rdf:typeschema:Organization
schema:name"DEFENSE RESEARCH LAB UNIV OF TEXAS AUSTIN."
schema:contributor
schema:datePublished"24 MAY 1949"
schema:datePublished"1949"
schema:description"As a step in the determination of the dynamic characteristics of missile fins, the frequencies and mode configurations of free vibration of uniform rectangular plates fixed along one edge are obtained for various (1/2, 1, 2, 5) cantilever span to chord ratios. Equations are set up in terms of influence coefficients and solved by matrix iteration. The Ritz method is also used in which the plate energies are expressed in terms of beam functions corresponding to the normal modes of vibration of uniform beams. It is shown that the first plate bending (symmetric) frequency corresponds closely to that of a uniform cantilever beam modified to account for the plate flexural rigidity factor. The first torsional (antisymmetric) frequency varies almost linearly with plate length to breadth ratio. An empirical equation is developed for ease in determination of this frequency. Experimental spot checks on a square cantilever plate indicate agreement within 2 percent of theoretical values for the first two frequencies. (Author)."
schema:inLanguage"en"
schema:name"Free vibration characteristics of rectangular cantilever plates."
schema:numberOfPages"17"
schema:publisher
rdf:typeschema:Organization
schema:name"Defense Technical Information Center"
윈도우 닫기

WorldCat에 로그인 하십시오 

계정이 없으세요? 아주 간단한 절차를 통하여 무료 계정을 만드실 수 있습니다.

취소 비밀번호를 잊어버리셨습니까?