skip to content
Innovative developments in design and manufacturing : advanced research in virtual and rapid prototyping : proceedings of the 4th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, 6-10 October 2009 Preview this item
ClosePreview this item

Innovative developments in design and manufacturing : advanced research in virtual and rapid prototyping : proceedings of the 4th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, 6-10 October 2009

Author: Paulo Bártolo
Publisher: Leiden, The Netherlands : CRC/Balkema, ©2010.
Edition/Format:   Print book : Conference publication : EnglishView all editions and formats

Focuses on the advances in virtual prototyping and rapid manufacturing. This title presents 110 papers covering: biomanufacturing, CAD and 3D data acquisition technologies, materials, rapid tooling  Read more...


(not yet rated) 0 with reviews - Be the first.

More like this

Find a copy online

Links to this item

Find a copy in the library

&AllPage.SpinnerRetrieving; Finding libraries that hold this item...


Genre/Form: Conference papers and proceedings
Material Type: Conference publication, Internet resource
Document Type: Book, Internet Resource
All Authors / Contributors: Paulo Bártolo
ISBN: 9780415873079 041587307X
OCLC Number: 461264418
Description: xvii, 727 pages : illustrations ; 26 cm
Contents: Invited lecturesNew challenges for Reverse Engineering in facial treatments: how canthe new 3-D non invasive surface measurements support diagnosis and treatment?, L.M. Galantucci1. BiomanufacturingScaffold Micro-Architecture Optimization Based on Bio-Mimetic Principles, A.B. Bucklen, B.M. Wettergreen & C.M. LiebschnerA minibioreactor for developing "perfused" capillaries in cardiomyocyte aggregates, C.K. Chua, D. Liu, F. Leong, V. Mironov & V. KasyanovSpinning of biomaterial microfibers for tendon tissue engineering, C.K. Chua, J. An, K.F. Leong, C.M. Cheah & H. ChangStereolithographic Rendering of Low Molecular Weight Polymer Scaffolds for Bone Tissue Engineering, D. Dean, J. Wallace, K. Kim, A.G. Mikos & J.P. FisherProcess flow for designing functionally graded tissue engineering scaffolds, .K. Chua, N. Sudarmadji, K.F. Leong, S.M. Chou, S.C. Lim & W.M. FirdausIndirect fabrication of tissue engineering scaffolds using rapid prototyping and a foaming process, J.Y. Tan, C.K. Chua & K.F. LeongFractal Tool Paths for Layered Manufacturing of Scaffolds with Matched Bone Properties, G.S. Kumar & P. PandithevanBioExtruder: Study of the influence of process parameters on PCL scaffolds properties, M. Domingos, F. Chiellini, A. Gloria, L. Ambrosio, P. Bartolo & E. ChielliniThe use of Periodic Minimal Surfaces for Scaffolds design, H.A. Almeida & P.J. BartoloIntelligent biopolymer selection system for medical applications, C.S. Moura, P.J. Bartolo & H.A. Almeida2. CAD and 3D data acquisition technologiesRapid Prototyping models of foetuses built from Ultrasound 3D and Magnetic Resonance files, J.R.L. Santos, J.R.L. Santos, R.C. Fontes, S. Campbell & H. WernerA Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM), P.C. Smith & A.E.W. RennieComparison of CT and CBCT for Fabrication of Dentistry Models via Rapid Prototyping Technology, H. Kheirollahi, F. Abesi & S. RahmatiGlobal approach to design and manufacture Direct Parts, J.Kernion, P.Mognol & J.Y.HascoetNovel Methodology in Design of Custom-made Hip Prosthesis, F. Abbaszadeh, S. Rahmati, F. Farahmand & R. FatollahzadehUse of BioCAD in the Development of a Growth Compliant Prosthetic Device for Cranioplasty of Growing Patients, D.T. Kemmoku, P.Y. Noritomi, F.G. Roland & J.V.L. da SilvaArtificial teeth manufacturing: inspection of mould and teeth by contactless scanning systems, E. Atzeni, L. Iuliano, P. Minetola, A. Salmi & A. GattoGuided dental surgery based on integrating 3D image slicing and structured light scanning, S. Barone, A. Paol & A. V. RazionaleA robotic system for 3D optical scanning of large surfaces, M. Maggini, S. Barone, A. Paoli & A.V. RazionaleA simple photogrammetric system for automatic capture and measurement of facial soft tissues during movement, L. M. Galantucci, F. Lavecchia & G. Percolo3D digitation of museum sculptures for model-making purposes: difficulties and possible solutions, G. Celani, L. Cancherini, A. Jardini, M. Oliveira, J.V.L. da Silva & V. PiccoliThe use of technologies as Rapid Prototyping and Scanner Inspection in surgical planning to medical application, C.B.L. Ulbrich, H.A. Hermini & C.A.C. ZavagliaPerformance evaluation of non contact measuring systems considering bias, M. Cavallaro, G. Moroni & S. PetroA surgical training model manufacture using rapid prototyping technology, L. Queijo, J. Rocha, L. Barreira, T. Barbosa, P.M. Pereira & M.S. JuanImage based modeling and morphological analysis of the human knee, G. Renner & L. HajderDesign of customised bioceramic medical implants by layered manufacturing, S. F. Khan & K.W. DalgarnoReverse Innovative Design in Rapid Modelling and Reverse Engineering Industrial Applications, A.E. Sonn & D.M. Dimitrov3D-Digitalization of ankle movement and 3D-CAD-method for patient specific external ankle support development and Rapid Manufacturing, R. Bjoerkstrand, J. Tuomi, M. Paloheimo, J. Lindahl & J. Salo3. MaterialsExperimental Investigation of Charpy Impact Test on Metallic SLM parts, E. Yasa, J Deckers, J.P. Kruth, M. Rombouts & J. LuytenSeries production of CE-certified orthopaedic implants with integrated network structures for improved bone ingrowth, P. Cremascoli & P. OhldinDensification and coarsening of lase sintered green parts by microwave technique, P. Veronesi, A. Gatto & L. IulianoFunctionally graded PA12/MWCNTs composite fabricated by SLS to aerospace applications: mechanical and electrical behaviour, R.A. Paggi, G.V. Salmoria, A. Lago & V.E. BealRapid Manufacturing of Polycaprolactone / Progesterone Drug Delivery Device by SLS, G.V. Salmoria, P. Klauss, R.A. Paggi, M. Souza, L.A. Kanis & K.M. ZeponSelective Laser Melting of NiTi shape memory components, H. Meier, C. Haberland, J. Frenzel & R. ZarnettaLaminated Object Manufacturing (LOM) of Glass Ceramics Substrates for LTCC Applications, C.M. Gomes, N. Travitzky, P. Greil, A. P.N. Oliveira & D. HotzaExtrusion Behavior of Chocolate for Additive Layer Manufacturing, L. Hao, O. Seaman, S. Mellor, J. Henderson, N. Sewell & M. SloanProduction of fully ferrous components using Indirect Selective Laser Sintering, P. Vallabhajosyula & D.L.BourellOn Mechanical Properties of SFF-made Calcium Polyphosphate Bio-Structures, Y. Shanjani & E. ToyserkaniOn the effects of build orientation in powder-fed Additive Layer Manufacture of steel 316L, E. Bassoli, A. Gatto, N.T. Sewell & D. JohnsMultiphase numerical modeling of metallic particle composites, C. Capela, J. Bolrao, F.V. Antunes & P. CamanoStudy of materials applied to an orthopaedic external circular fixator, C. Capela, L. Oliveira, P. Camano, P.Bartolo& I. Garcia4. Rapid tooling and manufacturingDirect Rapid Tooling for Die Forging - a new challenge for Layer-Based Technologies, R. Neugebauer, B. Mueller & A. WagnerAn automated method for RM feasibility evaluation, J. Munguia & F. FenollosaLayer Laminating Increases the Cost Effectiveness of Custom and Standard Last Manufacturing in the Footwear Industry, U. KlaegerEmbedding Of Electronic And System In Package Using Generative Processes, F. Ansorge, K. Heumann, D. Ifland, H. ReichlThe influence of the mould material on the rheology and mechanical characteristics of hybrid injection moulds, L. Cardon, A. Dekeyser, M. Moerman, S. Vernaillen & K. RagaertDesign for Rapid Manufacturing - Capturing Designers' Knowledge, S. Maidin and R.I. Campbell, I. Drstvensek & P. SeverDirect Fabrication of an in-situ Al Composite using Selective Laser Melting Process, S. Dadbakhsh, L. Hao, N. Sewell, P. JerrardWarpage of injection mouldings in hybrid moulds with epoxy-aluminium composite core, M.A. Silva, P.G. Martinho & A.S. PousadaRapid Manufacturing in Automation Applications, Ralf Becker & Andrzej GrzesiakDigital design and rapid manufacturing in orbital wall reconstruction, M. Salmi, J. Tuomi, K.Paloheimo, M. Paloheimo, R. Bjoerkstrand, A.A. Makitie, K. Mesimaki & R. KontioDirect Manufacturing of dense parts from martensitic precipitation hardening steel gas atomized powder by selective laser melting (SLM) technology, M. Averyanova & Ph. BertrandStudying the repeatability in DMLS technology using a complete geometry test part, J. Delgado, J. Ciurana, C. Reguant & B. CavalliniCooling channel configuration in Injection Moulds, D. Dimitrov, A. Moammer & T. Harms5. Advanced rapid prototyping technologies and nanofabricationA Practical Approach on Temperature Variation in Selective Laser Melting with a Novel Heat Transfer Model, C.K. Chua, A. Liu & K.F. LeongStudy and simulation of different scanning strategies in SLM, J. Jhabvala, E. Boillat, T. Antignac & R. GlardonInterface Attachibilty Analysis of Printed Patterns through Electrostatic Inkjet System, A.Ali, A. Rahman, K.H. Choi, B.S. Yang & D.S.KimThe Development of a Generic Rapid Prototyping Process Planning System, N. Volpato & J.A. FoggiattoHibrid Organic-Inorganic Nanocomposite for Infrared Laser Stereolithography Process, M.I.R. Barbosa, A.L. Jardini, M.C.B. Costa, R.A. Rezende & R. Maciel FilhoThe future of electronic products: conductive 3D Printing?, O. Diegel, S. Singamneni, B. Huang & I. GibsonChallenges and Opportunities in obtaining Rapid Ceramic Components by means of Subtractive Methods applied to Non Sintered Materials, J.R. Goma-Ayats, J. Minguella-Canela & R. Uceda-MoleraNew Generation of Rapid Manufacturing Equipment, O. HangaardA three dimensional FE-model for the investigation of transient physical effects in Selective Laser Melting, M.F. Zaeh, G. Branner & T.A. KrolA benchmark for accuracy evaluation of dental crowns up-to-date manufacturing, E. Atzeni, L. Iuliano, P. Minetola, A. Salmi & A. GattoDesign of a micro-channel reactor for decomposition of organic pollutants in waste water treatment, G. Charles, S. Corbel, M-C. Carre, T. Roques-Carmes, O. ZahraaInternal structure Optimization for Fused Deposition Modeling ABS Parts, L.M. Galantucci, F. Lavecchia, G. PercocoSimulation based Multi-Objective Optimisation Model for the SLS Process, A.K. Singh & R.S. PrakashMulti-objective optimization of part orientation to improve process planning in RM, S. Danjou & P. KoehlerThe production of Ti-6Al-4V parts with controlled porous architecture by three-dimensional fiber deposition, M. Rombouts, S. Mullens, J. Luyten, P. Nuyts & M. Schroeven3D Microstructuring of Hybrid Organic-inorganic Materials by Two-Photon Polymerization Technique, A.Ovsianikov, Boris Chichkov, M. Oubaha, R. Copperwhite, B.D. MacCraith, A Gaidukeviciute, I. Sakellari, A. Giakoumaki, D. Gray, M. Vamvakaki, M. Farsari, & C. FotakisBuid Time Estimator for Adaptive Slicing in Stereolithography, A.Sanati Nezhad, M. Vatani, F. Barazandeh & A.R. RahimiConstruction and Adaptation of na Open Source Rapid Prototyping Machine for Biomedical Research Purposes - a Multinational Collaborative Development, A.L. Lixandrao Filho, P.Y. Noritomi, J.V.L da Silva, P. Inforcatti Neto, P.Y.C. Cheung, N. Colangelo, H. Kang, J.T. Buthcer & E. MaloneMicro laser-milling of graphite: analysis of process parameters, J. Monteiro, P.J. Bartolo & C. Capela6. Virtual environments and simulationTowards ontology-based information extraction in distributed manufacturing systems, B.X. Li, L. Yang, S.K. Ong, Y. Lei & A.Y.C. NeeA Virtual Manufacturing System of Screw Threads Generation with Tasks Schedule Approach, J.S. LiangAn Interactive Multimedia Approach to Enhance Learning of Rapid Prototyping, C.K. Chua, T.T. Vu, K.F. Leong & C.S. LimProducts experience: how can Virtual Prototyping improve usability testing?, M. Mengoni, M. Germani & M. PeruzziniEfficient use of Traditional-, Rapid- and Virtual Prototyping in the industrial product development process, R. Bastiens, J. Detand, O. Rysman & T. DeflooUsing an immersive virtual environment to validate cellular manufacturing system simulation models, H.J.R Carvalho, C. Oliveira, H.C. Vale, D.C. Sena & A.J.V. PortoAnalysis and Fabrication of New Designed Dental Implant using Rapid Prototyping Technology, S. Rahmati, H. Kheirollahi & A. AzariA model for project-based environmental compliance management for small and medium enterprises, E.C.K. Chan & K.M. YuNew perspectives on form: real-time, virtual modeling in networked 3d environments, S.B. Fraser, M. Lyons, T.J. Miller, M. Barnard,H.K. Henning, J. Looser, H. Seichter & M. BillinghurstAdaptive Logistics: Simulation based decision making in assembly planning and -control, A.Kampker, G. Schuh, B. Franzkoch, T. Potente & T. WelterBreaking paradigms - The teaching of RM to "experienced newcomers", J.Munguia & M. VillegasDesign-by-the-Customer through Virtual Reality, A.G. Bachvarov, S. Maleshkov, P. Stojanova & J. KaticicContext information complemented virtual prototyping of factories, A.Kampker, G. Schuh, A. Hoeschen & J. NoeckerForm follows algorithm: Computer derived design for rapid manufacturing, S. KilliConcurrent design and development of a chassis set for an electromechanical transmission system, F. Fenollosa-Artes, J. Minguella-Canela & J. R. Goma-AyatsA Multi-agent Based Dynamic Scheduling Framework for Virtual Enterprises, S.H. Niu, S.K. Ong & A.Y.C. NeeIntegration of Rapid Manufacturing processes in a high-level numerical chain, R. Bonnard, P. Mognol & J.Y. HascoetA holistic approach for customer-oriented product engineering of micro devices, K. Hahn, T. Schmidt, R. Bruck, D. Ortloff & J. PoppFully GPU-based volume representation and material removal simulation of free-form objects, B. Tukora & T. SzalayLow-cost gesture detection as a form of interaction in a virtual reality multi-projection system, C. Oliveira, D.C. Sena, H.M.C. Vale, H.J.R. Carvalho & A.J.V. PortoConstruction of Immersive Multi-projection Environments for Treatment of Phobia of Heights, H.M.C Vale, C. Oliveira, D.C. Sena & A.J.V. PortoVirtual Reality for Assembly Simulation and Ergonomic Analysis in automotive chain of production, M. Cavallaro & G. MoroniBiomechanical response simulation of tetrahedral mass-spring model of intervertebral disc in a spine segment with haptic interface, K.T. Huynh, I. Gibson & W.F. LuAn approach to develop a rapid manufacturing knowledge-based environment, Tahar Laoui"3D Faxing": Rapid prototyping of new product and process systems to help manage multi-national development teams, O. Diegel, D.P.K. Singh, S. Singamneni, A. WithellFinite elements analysis of cylindrical copper shelled SLA electrodes, V. Iakovakis, J. Kechagias, G. Petropoulos & S. Maropoulos7. ApplicationsEOS innovations for e-manufacturing: High performance polymers and integrated quality management system, J. Greses & C.M. StotkoDigital technologies and the potential for CNC texturing the built environment, T. J. MillerRapid Manufacture of Dies and Moulds using Fused Deposition Modeling and Electrical Discharge Machining, S. Singamneni, O. Diegel, D.P.K. Singh & A.R. ChowdhuryApplication of 3D colour printing for the rapid prototyping of functional models, S. Junk & J. Samann-SunThe Power of a Single Prototype: Sustainable Fashion Textile Design and the prevention of Carcinogenic Melanoma, J. Farrer RCA & A. FinnTechnology transfer in digital prototyping by means of research laboratories: two case studies in architecture schools, G.Celani, R. Pupo & J. DuarteA Design increase to hospital regulator pressure, F. Ulbrich, C.B.L. Ulbrich & C.A.C. ZavagliaPotential of Building Information Modeling (bim) system, M. R. OliveiraMedical Applications of Rapid Prototyping - from Applications to Classification, J.Tuomi, K. Paloheimo, R. Bjoerkstrand, M. Salmi, M. Paloheimo & A. A. MakitieCost and benefit analysis of fused deposition modelling (FDM) technique and selective laser sintering (SLS) for fabrication of customised foot orthoses, J.M. Saleh & K.W. DalgarnoA Novel Methodology in Design and Fabrication of Lingual Orthodontic Appliance Based on Rapid Prototyping Technologies, H. Kheirollahi, S. Rahmati & F. AbesiDesign of Ergonomic Leisure Chair, C. Capela, A. Cerva, & P. Camano & F.V. Antunes
Responsibility: editors, Paulo Jorge da Silva Bártolo [and others].


User-contributed reviews
Retrieving GoodReads reviews...
Retrieving DOGObooks reviews...


Be the first.
Confirm this request

You may have already requested this item. Please select Ok if you would like to proceed with this request anyway.

Linked Data

Primary Entity

<> # Innovative developments in design and manufacturing : advanced research in virtual and rapid prototyping : proceedings of the 4th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, 6-10 October 2009
    a schema:Book, schema:CreativeWork ;
   library:oclcnum "461264418" ;
   library:placeOfPublication <> ;
   library:placeOfPublication <> ; # Leiden, The Netherlands
   schema:about <> ; # Manufacturing processes
   schema:about <> ; # Rapid prototyping
   schema:about <> ; # Rapid prototyping
   schema:about <> ; # Manufacturing processes
   schema:about <> ; # Computer-aided design
   schema:about <> ; # Computer-aided design
   schema:about <> ;
   schema:about <> ; # Virtual prototyping
   schema:bookFormat bgn:PrintBook ;
   schema:contributor <> ; # Paulo Bártolo
   schema:copyrightYear "2010" ;
   schema:creator <> ; # International Conference on Advanced Research and Rapid Prototyping (4th : 2009 : Leiria, Portugal)
   schema:datePublished "2010" ;
   schema:exampleOfWork <> ;
   schema:genre "Conference publication"@en ;
   schema:genre "Conference papers and proceedings"@en ;
   schema:inLanguage "en" ;
   schema:isSimilarTo <> ;
   schema:name "Innovative developments in design and manufacturing : advanced research in virtual and rapid prototyping : proceedings of the 4th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, 6-10 October 2009"@en ;
   schema:productID "461264418" ;
   schema:publication <> ;
   schema:publisher <> ; # CRC/Balkema
   schema:url <> ;
   schema:workExample <> ;
   umbel:isLike <> ;
   wdrs:describedby <> ;

Related Entities

<> # International Conference on Advanced Research and Rapid Prototyping (4th : 2009 : Leiria, Portugal)
    a bgn:Meeting, schema:Event ;
   schema:location <> ; # Leiria, Portugal)
   schema:name "International Conference on Advanced Research and Rapid Prototyping (4th : 2009 : Leiria, Portugal)" ;

<> # Leiden, The Netherlands
    a schema:Place ;
   schema:name "Leiden, The Netherlands" ;

<> # Leiria, Portugal)
    a schema:Place ;
   schema:name "Leiria, Portugal)" ;

<> # Virtual prototyping
    a schema:Thing ;
   schema:name "Virtual prototyping" ;

<> # Rapid prototyping
    a schema:Intangible ;
   schema:name "Rapid prototyping"@en ;

<> # Manufacturing processes
    a schema:Intangible ;
   schema:name "Manufacturing processes"@en ;

<> # Rapid prototyping
    a schema:Intangible ;
   schema:name "Rapid prototyping"@en ;

<> # Computer-aided design
    a schema:Intangible ;
   schema:name "Computer-aided design"@en ;

<> # Paulo Bártolo
    a schema:Person ;
   schema:familyName "Bártolo" ;
   schema:givenName "Paulo" ;
   schema:name "Paulo Bártolo" ;

    a schema:CreativeWork ;
   schema:isSimilarTo <> ; # Innovative developments in design and manufacturing : advanced research in virtual and rapid prototyping : proceedings of the 4th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, 6-10 October 2009

    a schema:ProductModel ;
   schema:isbn "041587307X" ;
   schema:isbn "9780415873079" ;

    a genont:InformationResource, genont:ContentTypeGenericResource ;
   schema:about <> ; # Innovative developments in design and manufacturing : advanced research in virtual and rapid prototyping : proceedings of the 4th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, 6-10 October 2009
   schema:dateModified "2018-03-11" ;
   void:inDataset <> ;

Content-negotiable representations

Close Window

Please sign in to WorldCat 

Don't have an account? You can easily create a free account.