přejít na obsah
Three dimensional milling using an abrasive waterjet Náhled dokumentu
ZavřítNáhled dokumentu
Checking...

Three dimensional milling using an abrasive waterjet

Autor Shijin Zhang
Vydavatel: ©2006.
Dizertace: Thesis (Ph. D.)--University of Missouri--Rolla, 2006.
Vydání/formát:   book_thsis : Thesis/dissertation : Manuscript   Archival Material : English
Databáze:WorldCat
Zhrnutí:
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling  Read more...
Rating:

(ještě nehodnoceno) 0 zobrazit recenze - Be the first.

Předmětová hesla:
Více podobných

 

Vyhledat exemplář v knihovně

&AllPage.SpinnerRetrieving; Vyhledávaní knihoven, které vlastní tento dokument...

Detaily

Typ materiálu: Thesis/dissertation, Manuscript
Typ dokumentu: Book, Archival Material
Všichni autoři/tvůrci: Shijin Zhang
OCLC číslo: 166903045
Poznámky: Vita.
Popis: xviii, 183 leaves : ill. ; 28 cm.
Jiné tituly: 3 dimensional milling using an abrasive waterjet
Odpovědnost: by Shijin Zhang.

Anotace:

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

Reviews

User-contributed reviews
Retrieving GoodReads reviews...
Retrieving DOGObooks reviews...

Štítky

Štítky všech uživatelů (1)

Zobrazit nejoblíbenější štítky jako: seznam štítků | tag cloud

Podobné dokumenty

Související předmětová hesla:(3)

Potvrdit tento požadavek

Tento dokument jste si již vyžádali. Prosím vyberte Ok pokud chcete přesto v žádance pokračovat.

Propojená data


<http://www.worldcat.org/oclc/166903045>
library:oclcnum"166903045"
library:placeOfPublication
owl:sameAs<info:oclcnum/166903045>
rdf:typej.0:Thesis
rdf:typej.2:Thesis
rdfs:seeAlso
schema:about
schema:about
schema:about
schema:about
schema:author
rdf:typeschema:Person
schema:name"Zhang, Shijin, 1974-"
schema:copyrightYear"2006"
schema:datePublished"2006"
schema:description""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."
schema:exampleOfWork<http://worldcat.org/entity/work/id/113142742>
schema:inLanguage"en"
schema:name"Three dimensional milling using an abrasive waterjet"

Content-negotiable representations

Zavřít okno

Prosím přihlašte se do WorldCat 

Nemáte účet? Můžete si jednoduše vytvořit bezplatný účet.