zum Inhalt wechseln
Three dimensional milling using an abrasive waterjet Titelvorschau
SchließenTitelvorschau
Prüfung…

Three dimensional milling using an abrasive waterjet

Verfasser/in: Shijin Zhang
Verlag: ©2006.
Dissertation: Thesis (Ph. D.)--University of Missouri--Rolla, 2006.
Ausgabe/Format   Diplomarbeit/Dissertation : Diplomarbeit/Dissertation : Manuskript   Archivarische Materialien : Englisch
Datenbank:WorldCat
Zusammenfassung:
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling  Weiterlesen…
Bewertung:

(noch nicht bewertet) 0 mit Rezensionen - Verfassen Sie als Erste eine Rezension.

Themen
Ähnliche Titel

 

Exemplar ausleihen

&AllPage.SpinnerRetrieving; Suche nach Bibliotheken, die diesen Titel besitzen ...

Details

Medientyp: Diplomarbeit/Dissertation, Manuskript
Dokumenttyp: Buch, Archivarische Materialien
Alle Autoren: Shijin Zhang
OCLC-Nummer: 166903045
Anmerkungen: Vita.
Beschreibung: xviii, 183 leaves : ill. ; 28 cm.
Andere Titel 3 dimensional milling using an abrasive waterjet
Verfasserangabe: by Shijin Zhang.
Weitere Informationen:

Abstract:

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

Rezensionen

Nutzer-Rezensionen
Suche nach GoodReads-Rezensionen
Suche nach DOGObooks-Rezensionen…

Tags

Alle Nutzer-Tags (1)

Anzeige der beliebtesten Schlagwörter als: Schlagwortliste | Tag Cloud

Ähnliche Titel

Anfrage bestätigen

Sie haben diesen Titel bereits angefordert. Wenn Sie trotzdem fortfahren möchten, klicken Sie auf OK.

Verlinkung


<http://www.worldcat.org/oclc/166903045>
library:oclcnum"166903045"
owl:sameAs<info:oclcnum/166903045>
rdf:typeschema:Book
rdf:typej.1:Thesis
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:copyrightYear"2006"
schema:creator
schema:datePublished"2006"
schema:description""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."
schema:exampleOfWork<http://worldcat.org/entity/work/id/113142742>
schema:inLanguage"en"
schema:name"3 dimensional milling using an abrasive waterjet"
schema:name"Three dimensional milling using an abrasive waterjet"
schema:url

Content-negotiable representations

Fenster schließen

Bitte in WorldCat einloggen 

Sie haben kein Konto? Sie können sehr einfach ein kostenloses Konto anlegen,.