aller au contenu
Three dimensional milling using an abrasive waterjet Aperçu de cet ouvrage
FermerAperçu de cet ouvrage
Vérifiant…

Three dimensional milling using an abrasive waterjet

Auteur : Shijin Zhang
Éditeur : ©2006.
Dissertation : Thesis (Ph. D.)--University of Missouri--Rolla, 2006.
Édition/format :   Thèse/dissertation : Thèse/mémoire : Manuscrit   Document mixte : Anglais
Base de données :WorldCat
Résumé :
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling  Lire la suite...
Évaluation :

(pas encore évalué) 0 avec des critiques - Soyez le premier.

Sujets
Plus comme ceci

 

Trouver un exemplaire dans la bibliothèque

&AllPage.SpinnerRetrieving; Recherche de bibliothèques qui possèdent cet ouvrage...

Détails

Type d’ouvrage : Thèse/mémoire, Manuscrit
Format : Livre, Document mixte
Tous les auteurs / collaborateurs : Shijin Zhang
Numéro OCLC : 166903045
Notes : Vita.
Description : xviii, 183 leaves : ill. ; 28 cm.
Autres titres : 3 dimensional milling using an abrasive waterjet
Responsabilité : by Shijin Zhang.
Plus d’informations :

Résumé :

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

Critiques

Critiques d’utilisateurs
Récupération des critiques de GoodReads...
Récuperation des critiques DOGObooks…

Tags

Tous les tags des utilisateurs (1)

Voir les tags les plus utilisés sous forme de : liste de tags | nuage de tags

Ouvrages semblables

Confirmez cette demande

Vous avez peut-être déjà demandé cet ouvrage. Veuillez sélectionner OK si vous voulez poursuivre avec cette demande quand même.

Données liées


<http://www.worldcat.org/oclc/166903045>
bgn:inSupportOf"Thesis (Ph. D.)--University of Missouri--Rolla, 2006."
library:oclcnum"166903045"
rdf:typebgn:Thesis
rdf:typeschema:Book
rdf:valueUnknown value: deg
rdf:valueUnknown value: mss
schema:about
schema:about
schema:about
schema:alternateName"3 dimensional milling using an abrasive waterjet"
schema:copyrightYear"2006"
schema:creator
schema:datePublished"2006"
schema:description""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."
schema:exampleOfWork<http://worldcat.org/entity/work/id/113142742>
schema:inLanguage"en"
schema:name"Three dimensional milling using an abrasive waterjet"
schema:publication
wdrs:describedby

Content-negotiable representations

Fermer la fenêtre

Veuillez vous identifier dans WorldCat 

Vous n’avez pas de compte? Vous pouvez facilement créer un compte gratuit.