passa ai contenuti
Three dimensional milling using an abrasive waterjet Anteprima di questo documento
ChiudiAnteprima di questo documento
Stiamo controllando…

Three dimensional milling using an abrasive waterjet

Autore: Shijin Zhang
Editore: ©2006.
Tesi: Thesis (Ph. D.)--University of Missouri--Rolla, 2006.
Edizione/Formato:   Tesi/dissertazione : Thesis/dissertation : Manuscript   Archival Material : English
Banca dati:WorldCat
Sommario:
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling  Per saperne di più…
Voto:

(non ancora votato) 0 con commenti - Diventa il primo.

Soggetti
Altri come questo

 

Trova una copia in biblioteca

&AllPage.SpinnerRetrieving; Stiamo ricercando le biblioteche che possiedono questo documento…

Dettagli

Tipo materiale: Thesis/dissertation, Manuscript
Tipo documento: Book, Archival Material
Tutti gli autori / Collaboratori: Shijin Zhang
Numero OCLC: 166903045
Note: Vita.
Descrizione: xviii, 183 leaves : ill. ; 28 cm.
Altri titoli: 3 dimensional milling using an abrasive waterjet
Responsabilità: by Shijin Zhang.
Maggiori informazioni:

Abstract:

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

Commenti

Commenti degli utenti
Recuperando commenti GoodReads…
Stiamo recuperando commenti DOGObooks

Etichette

Le etichette di tutti gli utenti (1)

Vedi le etichette più popolari come: lista di etichette | nuvola di etichette

Documenti simili

Conferma questa richiesta

Potresti aver già richiesto questo documento. Seleziona OK se si vuole procedere comunque con questa richiesta.

Dati collegati


<http://www.worldcat.org/oclc/166903045>
library:oclcnum"166903045"
owl:sameAs<info:oclcnum/166903045>
rdf:typeschema:Book
rdf:typej.1:Thesis
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:copyrightYear"2006"
schema:creator
schema:datePublished"2006"
schema:description""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."
schema:exampleOfWork<http://worldcat.org/entity/work/id/113142742>
schema:inLanguage"en"
schema:name"3 dimensional milling using an abrasive waterjet"
schema:name"Three dimensional milling using an abrasive waterjet"
schema:url

Content-negotiable representations

Chiudi finestra

Per favore entra in WorldCat 

Non hai un account? Puoi facilmente crearne uno gratuito.