コンテンツへ移動
Three dimensional milling using an abrasive waterjet 資料のプレビュー
閉じる資料のプレビュー
確認中…

Three dimensional milling using an abrasive waterjet

著者: Shijin Zhang
出版: ©2006.
論文: Thesis (Ph. D.)--University of Missouri--Rolla, 2006.
エディション/フォーマット:   学位論文/卒業論文 : Thesis/dissertation : Manuscript   アーカイブ資料 : English
データベース:WorldCat
概要:
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling  続きを読む
評価:

(まだ評価がありません) 0 件のレビュー - 是非あなたから!

件名:
関連情報:

 

オフラインで入手

&AllPage.SpinnerRetrieving; この資料の所蔵館を検索中…

詳細

資料の種類: Thesis/dissertation, Manuscript
ドキュメントの種類: 図書, アーカイブ資料
すべての著者/寄与者: Shijin Zhang
OCLC No.: 166903045
注記: Vita.
物理形態: xviii, 183 leaves : ill. ; 28 cm.
その他のタイトル: 3 dimensional milling using an abrasive waterjet
責任者: by Shijin Zhang.
その他の情報:

概要:

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

レビュー

ユーザーレビュー
GoodReadsのレビューを取得中…
DOGObooksのレビューを取得中…

タグ

すべてのユーザーのタグ (1)

人気のタグを表示: タグリスト | タグクラウド

  • thesis  (by 1 ユーザー)

類似資料

リクエストの確認

あなたは既にこの資料をリクエストしている可能性があります。このリクエストを続行してよろしければ、OK を選択してください。

リンクデータ


<http://www.worldcat.org/oclc/166903045>
library:oclcnum"166903045"
owl:sameAs<info:oclcnum/166903045>
rdf:typeschema:Book
rdf:typej.1:Thesis
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:copyrightYear"2006"
schema:creator
schema:datePublished"2006"
schema:description""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."
schema:exampleOfWork<http://worldcat.org/entity/work/id/113142742>
schema:inLanguage"en"
schema:name"3 dimensional milling using an abrasive waterjet"
schema:name"Three dimensional milling using an abrasive waterjet"
schema:url

Content-negotiable representations

ウインドウを閉じる

WorldCatにログインしてください 

アカウントをお持ちではないですか?簡単に 無料アカウントを作成することができます。.