컨텐츠로 이동
Three dimensional milling using an abrasive waterjet 해당 항목을 미리보기
닫기해당 항목을 미리보기
확인중입니다…

Three dimensional milling using an abrasive waterjet

저자: Shijin Zhang
출판사: ©2006.
논문: Thesis (Ph. D.)--University of Missouri--Rolla, 2006.
판/형식:   주제/주장 : 눈문/학위논문 : 필사본   아카이브 자료 : 영어
데이터베이스:WorldCat
요약:
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling  더 읽기…
평가:

(아무런 평가가 없습니다.) 0 리뷰와 함께 - 첫번째로 올려주세요.

주제
다음과 같습니다:

 

도서관에서 사본 찾기

&AllPage.SpinnerRetrieving; 해당항목을 보유하고 있는 도서관을 찾는 중

상세정보

자료 유형: 눈문/학위논문, 필사본
문서 형식: 책, 아카이브 자료
모든 저자 / 참여자: Shijin Zhang
OCLC 번호: 166903045
메모: Vita.
설명: xviii, 183 leaves : ill. ; 28 cm.
다른 제목 3 dimensional milling using an abrasive waterjet
책임: by Shijin Zhang.
더 많은 정보:

초록:

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

리뷰

사용자-기여 리뷰
GoodReads 리뷰 가져오는 중…
DOGObooks 리뷰를 가지고 오는 중…

태그

모든 사용자 태그 (1)

가장 인기있는 태그 보기 태그 리스트 | tag cloud

유사 항목

요청하신 것을 확인하기

이 항목을 이미 요청하셨을 수도 있습니다. 만약 이 요청을 계속해서 진행하시려면 Ok을 선택하세요.

링크된 데이터


<http://www.worldcat.org/oclc/166903045>
library:oclcnum"166903045"
owl:sameAs<info:oclcnum/166903045>
rdf:typeschema:Book
rdf:typej.1:Thesis
schema:about
schema:about
schema:about
schema:about
schema:about
schema:about
schema:copyrightYear"2006"
schema:creator
schema:datePublished"2006"
schema:description""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."
schema:exampleOfWork<http://worldcat.org/entity/work/id/113142742>
schema:inLanguage"en"
schema:name"3 dimensional milling using an abrasive waterjet"
schema:name"Three dimensional milling using an abrasive waterjet"
schema:url

Content-negotiable representations

윈도우 닫기

WorldCat에 로그인 하십시오 

계정이 없으세요? 아주 간단한 절차를 통하여 무료 계정을 만드실 수 있습니다.