pular para conteúdo
Three dimensional milling using an abrasive waterjet Ver prévia deste item
FecharVer prévia deste item
Checando...

Three dimensional milling using an abrasive waterjet

Autor: Shijin Zhang
Editora: ©2006.
Dissertação: Ph. D. University of Missouri--Rolla 2006
Edição/Formato   Tese/dissertação : Tese/dissertação : Manuscrito   Material de Arquivo : Inglês
Base de Dados:WorldCat
Resumo:
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters ... However, the tests also showed that it was very difficult to accurately control the milling  Ler mais...
Classificação:

(ainda não classificado) 0 com críticas - Seja o primeiro.

Assuntos
Mais como este

 

Encontrar uma cópia na biblioteca

&AllPage.SpinnerRetrieving; Encontrando bibliotecas que possuem este item...

Detalhes

Tipo de Material: Tese/dissertação, Manuscrito
Tipo de Documento: Livro, Material de Arquivo
Todos os Autores / Contribuintes: Shijin Zhang
Número OCLC: 166903045
Notas: Vita.
Descrição: xviii, 183 leaves : illustrations ; 28 cm
Outros Títulos: 3 dimensional milling using an abrasive waterjet
Responsabilidade: by Shijin Zhang.
Mais informações:

Resumo:

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters ... However, the tests also showed that it was very difficult to accurately control the milling depth ... Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed ... As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

Críticas

Críticas contribuídas por usuários
Recuperando críticas GoodReas...
Recuperando comentários DOGObooks

Etiquetas

Etiquetas de todos os usuários (1)

Ver as etiquetas mais populares como: lista de etiquetas | nuvem de etiquetas

Ítens Similares

Confirmar esta solicitação

Você já pode ter solicitado este item. Por favor, selecione Ok se gostaria de proceder com esta solicitação de qualquer forma.

Dados Ligados


Primary Entity

<http://www.worldcat.org/oclc/166903045> # Three dimensional milling using an abrasive waterjet
    a pto:Manuscript, bgn:Thesis, schema:CreativeWork, schema:IndividualProduct, schema:Book ;
   bgn:inSupportOf "" ;
   library:oclcnum "166903045" ;
   schema:about <http://experiment.worldcat.org/entity/work/data/113142742#Thing/precision_cutting> ; # Precision cutting.
   schema:about <http://id.worldcat.org/fast/794671> ; # Abrasives
   schema:about <http://id.worldcat.org/fast/1171775> ; # Water jet cutting
   schema:alternateName "3 dimensional milling using an abrasive waterjet" ;
   schema:copyrightYear "2006" ;
   schema:creator <http://experiment.worldcat.org/entity/work/data/113142742#Person/zhang_shijin_1974> ; # Shijin Zhang
   schema:datePublished "2006" ;
   schema:description ""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters ... However, the tests also showed that it was very difficult to accurately control the milling depth ... Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed ... As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."@en ;
   schema:exampleOfWork <http://worldcat.org/entity/work/id/113142742> ;
   schema:inLanguage "en" ;
   schema:name "Three dimensional milling using an abrasive waterjet"@en ;
   schema:productID "166903045" ;
   schema:publication <http://www.worldcat.org/title/-/oclc/166903045#PublicationEvent/2006> ;
   wdrs:describedby <http://www.worldcat.org/title/-/oclc/166903045> ;
    .


Related Entities

<http://experiment.worldcat.org/entity/work/data/113142742#Person/zhang_shijin_1974> # Shijin Zhang
    a schema:Person ;
   schema:birthDate "1974" ;
   schema:familyName "Zhang" ;
   schema:givenName "Shijin" ;
   schema:name "Shijin Zhang" ;
    .

<http://experiment.worldcat.org/entity/work/data/113142742#Thing/precision_cutting> # Precision cutting.
    a schema:Thing ;
   schema:name "Precision cutting." ;
    .

<http://id.worldcat.org/fast/1171775> # Water jet cutting
    a schema:Intangible ;
   schema:name "Water jet cutting"@en ;
    .

<http://id.worldcat.org/fast/794671> # Abrasives
    a schema:Intangible ;
   schema:name "Abrasives"@en ;
    .


Content-negotiable representations

Close Window

Por favor, conecte-se ao WorldCat 

Não tem uma conta? Você pode facilmente criar uma conta gratuita.