跳至内容
Three dimensional milling using an abrasive waterjet 線上預覽
關閉線上預覽
正在查...

Three dimensional milling using an abrasive waterjet

作者: Shijin Zhang
出版商: ©2006.
論文: Thesis (Ph. D.)--University of Missouri--Rolla, 2006.
版本/格式:   碩士/博士論文 : 碩士論文/博士論文 : 手稿   文檔資料 : 英語
資料庫:WorldCat
提要:
"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling  再讀一些...
評定級別:

(尚未評分) 0 附有評論 - 成爲第一個。

主題
更多類似這樣的

 

在圖書館查詢

&AllPage.SpinnerRetrieving; 正在查詢有此資料的圖書館...

詳細書目

資料類型: 碩士論文/博士論文, 手稿
文件類型: 圖書, 文檔資料
所有的作者/貢獻者: Shijin Zhang
OCLC系統控制編碼: 166903045
注意: Vita.
描述: xviii, 183 leaves : ill. ; 28 cm.
其他題名: 3 dimensional milling using an abrasive waterjet
責任: by Shijin Zhang.
更多資訊:

摘要:

"This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii.

評論

讀者提供的評論
正在擷取GoodReads評論...
正在擷取DOGObooks的評論

標籤

所有的讀者標籤 (1)

檢視最熱門的標籤,呈現的形式是: 標籤我的最愛清單 | 標籤雲(tag cloud)

類似資料

確認申請

你可能已經申請過這份資料。若還是想申請,請選確認。

連結資料


<http://www.worldcat.org/oclc/166903045>
bgn:inSupportOf"Thesis (Ph. D.)--University of Missouri--Rolla, 2006."
library:oclcnum"166903045"
rdf:typebgn:Thesis
rdf:typeschema:Book
rdf:valueUnknown value: deg
rdf:valueUnknown value: mss
schema:about
schema:about
schema:about
schema:alternateName"3 dimensional milling using an abrasive waterjet"
schema:copyrightYear"2006"
schema:creator
schema:datePublished"2006"
schema:description""This dissertation focused on an investigation of metal milling using abrasive waterjet (AWJ) technology. After reviewing existing methods, a new tool named the Wobbler was tested. The test results showed that a very smooth milled surface could be achieved with this tool when it was operated with the proper parameters...However, the tests also showed that it was very difficult to accurately control the milling depth...Based on the results of these investigations, several empirical models, including the optimum abrasive flow rate (AFR) model, surface roughness prediction model and taper removal model, have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, leaf iii."
schema:exampleOfWork<http://worldcat.org/entity/work/id/113142742>
schema:inLanguage"en"
schema:name"Three dimensional milling using an abrasive waterjet"
schema:publication
wdrs:describedby

Content-negotiable representations

關閉視窗

請登入WorldCat 

没有帳號嗎?你可很容易的 建立免費的帳號.