## Find a copy in the library

Finding libraries that hold this item...

## Details

Genre/Form: | Handbooks and manuals Handbooks, manuals, etc |
---|---|

Document Type: | Book |

All Authors / Contributors: |
Colonel William T McLyman |

ISBN: | 9781439836873 1439836876 |

OCLC Number: | 663445232 |

Description: | 1 volume (various pagings) : illustrations ; 29 cm |

Contents: | Note continued: 8. Continuous Current, Buck Converter Design Equations -- 9. The Boost Converter -- 10. Discontinuous Current, Boost Converter Design Equations -- 11. Continuous Current, Boost Converter Design Equations -- 12. The Inverting Buck-Boost Converter -- 13. Discontinuous Current, Inverting Buck-Boost Design Equations -- 14. Continuous Current, Inverting Buck-Boost Design Equations -- 15. The Isolated, Buck-Boost Converter -- 16. Discontinuous Current, Isolated Buck-Boost Design Equations -- 17. Continuous Current, Isolated Buck-Boost Design Equations -- 18. Design Example, Buck-Boost Isolated Converter Discontinuous Current -- 19. Design Example, Boost Converter, Discontinuous Current -- 20. Designing Boost Inductors for Power Factor Correction (PFC) -- 21. Standard Boost Flyback Converter -- 22. Boost, PFC Converter -- 23. Design Example, (PFC) Boost Converter, Continuous Current -- 24. Skin Effect -- 25. Recognitions -- 26. References -- 1. Introduction -- 2. Circuit Operation -- 3.Comparing the Dynamic B-H Loops -- 4. Forward Converter Waveforms -- 5. Transformer Design Using the Core Geometry, Kg, Approach -- 6. Forward Converter Output Inductor Design -- 7. Output Inductor Design Using the Core Geometry, Kg, Approach -- 8. Recognition -- 1. Introduction -- 2. Capacitor -- 3. Inductor -- 4. Oscillation -- 5. Applying Power -- 6. Resonant Charge -- 7. Input Filter Inductor Design Procedure -- 8. Input Filter Design Specification -- 9. Recognition -- 10. References -- 1. Introduction -- 2. Analysis of the Input Current Component -- 3. Uniqueness of a Current Transformer -- 4. Current Transformer Circuit Applications -- 5. Current Transformer Design Example -- 6. Design Performance -- 1. Introduction -- 2. Parasitic Effects -- 3. Leakage Flux -- 4. Minimizing Leakage Inductance -- 5. Winding Capacitance -- 6. Winding Capacitance Turn-to-Turn -- 7. Winding Capacitance Layer-to-Layer -- 8. Capacitance Winding-to-Winding -- 9. Stray Capacitance -- 10. References -- 1. Introduction -- 2. The Voltage-fed Converter -- 3. Regulating and Filtering -- 4. The Current-fed Converter -- 5. The Quiet Converter -- 6. Regulating and Filtering -- 7. Quiet Converter Waveforms -- 8. Technology on the Move -- 9. Window Utilization Factor, Ku -- 10. Temperature Stability -- 11. Calculating the Apparent Power, Pt -- 12. Quiet Converter Design Equations -- 13. Transformer Design, Using the Core Geometry, Kg, Approach -- 14. Design Review -- 15. Recognition -- 16. References -- 1. Introduction -- 2. Basic Rotary Transformer -- 3. Square Wave Technology -- 4. Rotary Transformer Leakage Inductance -- 5. Current-fed Sine Wave Converter Approach -- 6. Rotary Transformer Design Constraints -- 7. References -- 1. Introduction -- 2. Planar Transformer Basic Construction -- 3. Planar Integrated PC Board Magnetics -- 4. Core Geometries -- 5. Planar Transformer and Inductor Design Equations -- 6. Window Utilization, Ku -- 7. Current Density, J -- 8. Printed Circuit Windings -- 9. Calculating the Mean Length Turn, MLT -- 10. Winding Resistance and Dissipation -- 11. PC Winding Capacitance -- 12. Planar Inductor Design -- 13. Winding Termination -- 14. PC Board Base Materials -- 15. Core Mounting and Assembly -- 16. References -- 1. Output Power, Po, Versus Apparent Power, Pt, Capability -- 2. Transformer Derivation for the Core Geometry, Kg -- 3. Transformer Derivation for the Area Product, Ap -- 4. Inductor Derivation for the Core Geometry, Kg -- 5. Inductor Derivation for the Area Product, Ap -- 6. Transformer Regulation -- 7. Recognition -- 1. Introduction -- 2. The Voltage and Current Relationship of an Autotransformer -- 3. Autotransformer Step-up or Boost -- 4. Autotransformer Step-down or Buck -- 5.250 Watt Step-up Autotransformer Design, (Using the Core Geometry, Kg, Approach) -- 6. Confirming the Window Utilization -- 7.250 Watt Step-up Autotransformer Design Test Data (Using the Core Geometry, Kg, Approach) -- 8.Comparing the Step-up Autotransformer Design With Isolation Transformer -- 9.250-Watt Step-down Autotransformer Design (Using the Core Geometry, Kg, Approach) -- 10. Confirming the Window Utilization -- 11.250 Watt Step-down Autotransformer Design Test Data (Using the Core Geometry, Kg, Approach) -- 12.Comparing the Autotransformer Design With a Standard Isolation Transformer -- 13. Engineering Note -- 14. Recognition -- 15. References -- 1. Introduction -- 2. Differential Mode Noise -- 3.Common Mode Noise -- 4. Semiconductors Common Mode Noise Source -- 5. Transformers and Inductors Common Mode Noise Source -- 6. Faraday Shield -- 7. The Common Mode Filter -- 8. The Common Mode Filter Inductor -- 9. Choosing the Magnetic Material -- 10. Ferrite Temperature Characteristics -- 11. Ferrite Stress Characteristics -- 12. Core Saturation -- 13.Common Mode Filter Inductor Design Specification -- 14. References -- 1. Introduction -- 2. The Series Saturable Reactor -- 3. Basic Operation -- 4. How the Series Saturable Reactor Operates -- 5. Control Winding -- 6. Saturated Inductance and Winding Resistance -- 7. Saturable Reactor Power Gain -- 8. Response Time for Saturable Reactors -- 9. Saturable Reactor Apparent Power, Pt -- 10. Mean Length Turn for E Cores -- 11. Calculating, MLT for Toroidal Cores -- 12. Toroidal Saturable Reactor Surface Area -- 13.E Core Saturable Reactor Surface Area -- 14. Designing with Toroidal Tape Cores -- 15.Comparing the Toroidal Tape Cores with the Laminations -- 16. Series Saturable Reactor Design Example -- 17. Specification and Design -- 18. Series Saturable Reactor Design Test Data (Core Geometry, Kg, Approach) -- 19. Ultra Low Power 0-15 Amp Current Transducer (Saturable Reactor) -- 20. Summary -- 21. Recognition -- 22. References -- 1. Introduction -- 2. Self-Saturating, Magnetic Amplifier Overview -- 3. Basic Operation of the Self-Saturating, Mag-Amp -- 4. Square and Round B-H Loop Performance -- 5. Adding the Bias Winding -- 6. Control Winding and Rectifiers -- 7. Self-Saturating Magnetic Amplifier Apparent Power, Pt -- 8. Magnetic Amplifier Power Gain -- 9. Self-Saturating Magnetic Amplifier Response Time -- 10. Mean Length Turn for DU Lamination -- 11. Calculating, MLT for Toroidal Cores -- 12. Toroidal Magnetic Amplifier Surface Area -- 13. DU Lamination Magnetic Amplifier Surface Area -- 14. Control Winding Calculation -- 15. Bias Winding Calculation -- 16. Control Winding Precautions -- 17. Self-Saturating Magnetic Amplifier Design Example -- 18. Self-Saturating, Magnetic Amplifier Design Test Data -- 19. Recognition -- 20. References -- 1. Introduction -- 2. Design Overview -- 3. Powder Core Inductor Design Example (Core Geometry, Kg, Approach) -- 4. Powder Core Inductor Design Test Data (Core Geometry, Kg, Approach) -- 5. Gapped Ferrite Inductor Design Example (Core Geometry, Kg, Approach) -- 6. Gapped, Ferrite Inductor Design Test Data (Core Geometry, Kg, Approach) -- 7. Powder Core, Input Inductor Design Example (Core Geometry, Kg, Approach) -- 8. Powder Core, Input Inductor Design Test Data (Core Geometry, Kg, Approach). |

Responsibility: | Colonel Wm. T. McLyman. |

More information: |

### Abstract:

"Preface I have had many requests to update my book Transformer and Inductor Design Handbook, because of the way power electronics has changed in the past few years. I have been requested to add and expand on the present Chapters. There are now twenty-six Chapters. The new Chapters are autotransformer design, common-mode inductor design, series saturable reactor design, self-saturating magnetic amplifier and designing inductors for a given resistance, all with step-by-step design examples. This book offers a practical approach with design examples for design engineers and system engineers in the electronics industry, as well as the aerospace industry. While there are other books available on electronic transformers, none of them seem to have been written with the user's viewpoint in mind. The material in this book is organized so that the design engineer, student engineer or technician, starting at the beginning of the book and continuing through the end, will gain a comprehensive knowledge of the state of the art in transformer and inductor design. The more experienced engineers and system engineers will find this book a useful tool when designing or evaluating transformers and inductors. Transformers are to be found in virtually all electronic circuits. This book can easily be used to design lightweight, high-frequency aerospace transformers or low-frequency commercial transformers. It is, therefore, a design manual"--

## Reviews

*Editorial reviews*

Publisher Synopsis

"Every transformer designer needs to have a copy of this book. Not only will it be helpful for designing transformers, but it provides an in-depth background of the fundamentals of transformer magnetic, including the latest designs used in modern switching power supplies." -John J. Shea, IEEE Electrical Insulation Magazine, November/December 2012, Vol. 28, No. 6 Praise for the Previous Edition: "Not only would the expert working on a specific design benefit from this handbook, but also the general reader would get a very good working knowledge on transformer design because the book covers fundamentals and magnetic material characteristics in a very clearly written, easy-to-read style. ... Along with all of the practical design examples, the book is filled with clear and well-annotated illustrations and circuit schematics that provide great insight; the many references make this book a must have for anyone designing transformers or inductors." -IEEE Electrical Insulation Magazine, Feb. 2005 "This book is a must for engineers doing magnetic design. Whether you are working on high "rel" state of the art design or high volume, low cost production, this book will help you." -Robert G. Noah, Application Engineering Manager (retired), Magnetics, Division of Spang and Company Read more...

*User-contributed reviews*