skip to content

Ping, W. V.

Overview
Works: 18 works in 22 publications in 1 language and 52 library holdings
Classifications: TN913,
Publication Timeline
Key
Publications about W. V Ping
Publications by W. V Ping
Most widely held works by W. V Ping
Noise and ground vibration monitoring related to dragline operations in phosphate mining : final report by W. V Ping( Book )
1 edition published in 1996 in English and held by 17 libraries worldwide
Enhancement of resilient modulus data for the design of pavement structures in Florida by W. V Ping( Book )
2 editions published in 2007 in English and held by 5 libraries worldwide
Development of an automated procedure for implementing resilient modulust test for design of pavement by W. V Ping( Book )
1 edition published in 2005 in English and held by 3 libraries worldwide
Effects of aggregate gradation, aggregate type, and SBS polymer-modified binder on Florida HMAC fracture energy properties by W. V Ping( Computer File )
2 editions published in 2009 in English and held by 3 libraries worldwide
"The primary objective of this research study was to evaluate the fracture mechanics properties of HMA concrete for Superpave mixtures. An experimental program was performed on asphalt mixtures with various types of materials. The laboratory testing program was developed by applying the viscoelastic fracture mechanics-based framework that apperared to be capable of describing the whole mechanical properties of HMA according to past research studies at University of Florida. The goals for these experiments are to evaluate the effect of aggregate type, the effect of coarse aggregate gradation adjustment to control mix designs, and the effect of SBS polymer on fracture mechanics properties of HMA mixtures"--Technical report documentation p
Design highwater clearances for highway pavements ( Book )
1 edition published in 2008 in English and held by 3 libraries worldwide
Constructibility of stabilized subgrade layer under high groundwater table by W. V Ping( Book )
1 edition published in 2005 in English and held by 3 libraries worldwide
Design highwater clearances for highway pavements by W. V Ping( Computer File )
1 edition published in 2008 in English and held by 2 libraries worldwide
High groundwater table exerts detrimental effects on the roadway base and the whole pavement. Base clearance guidelines have been developed to prevent water from entering the pavement system in order to reduce its detrimental effects. In these guidelines a minimum height, the clearance, between a groundwater level and a particular elevation within the pavement system is specified. This report presents an experimental study to evaluate the effects of high groundwater and moisture on determining pavement base clearance for granular subgrades. Full-scale in-lab test-pit tests were conducted to simulate pavement profile and vehicle dynamic impact on the pavement. Eleven types of subgrade were tested for this study. From the test, using layer theory, the results of the resilient modulus for each layer (layer resilient modulus) can be compared with the resilient modulus results from laboratory test. The dominant factor or factors of the effect of moisture to resilient modulus will be discussed. The results showed that a 36-in. base clearance was considered adequate for the base protection of most of the A-3 and A-2-4 subgrades against high groundwater tables. The lab resilient modulus and layer resilient modulus had the same trend for each soil according to the moisture content change
Design highwater clearances for highway pavements by W. V Ping( Computer File )
1 edition published in 2008 in English and held by 2 libraries worldwide
This document is the second volume of 'Design Highway Clearance for Highway Pavements'. It is the appendix and has very little narrative. It consists, primarily, of tables, charts and graphs
Influence of soil suction and environmental condition on the drying rate for some problematic soils : Phase II study ( Book )
1 edition published in 1998 in English and held by 2 libraries worldwide
Laboratory simulation of field compaction characteristics (Phase I) by W. V Ping( Book )
2 editions published in 2003 in English and held by 2 libraries worldwide
The effect of high groundwater level on pavement subgrade performance by Chaohan Zhang( Computer File )
1 edition published in 2004 in English and held by 1 library worldwide
An evaluation of engineering properties of problematic soils in highway construction by Sean Patrick McDonald( Book )
1 edition published in 1996 in English and held by 1 library worldwide
Evaluation of laboratory compaction techniques for simulating field soil compaction (Phase II) ( Book )
2 editions published in 2003 in English and held by 1 library worldwide
Design high water clearances for highway pavements by W. V Ping( file )
1 edition published in 2008 in English and held by 1 library worldwide
This document is the second volume of 'Design Highway Clearance for Highway Pavements'. It is the appendix and has very little narrative. It consists, primarily, of tables, charts and graphs
Traffic capacity and speed analyses of freeway work zones based on computer simulation by Kangyuan Zhu( Computer File )
1 edition published in 2004 in English and held by 1 library worldwide
Engineering properties of Florida concrete mixes for implementing the AASHTO recommended mechanistic-empirical rigid pavement design guide by Raphael Kampmann( Book )
1 edition published in 2008 in English and held by 1 library worldwide
"The coefficient of thermal expansion (CTE) is a fundamental property of Portland cement concrete (PCC). The magnitude of temperature related pavement deformations is directly proportional to the CTE during the pavement design life. Because of its critical effect on PCC performance, it is proposed to be considered for distress and smoothness prediction by the newly developed Mechanistic-Empirical Pavement Design Guide (M-E PDG). To account for M-E PDG implementation in Florida, three typical Florida concrete mixtures were experimentally measured for compressive strength, flexural strength, splitting tensile strength, Young's modulus, Poisson's ratio, and CTE according to AASHTO TP-60"--Technical report documentation p
Implementing resilient modulus test for design of pavement structures in Florida by W. V Ping( Book )
1 edition published in 2003 in English and held by 0 libraries worldwide
 
moreShow More Titles
fewerShow Fewer Titles
Languages
English (22)
Close Window

Please sign in to WorldCat 

Don't have an account? You can easily create a free account.