Front cover image for Advances in materials, processing and manufacturing : selected, peer reviewed papers from the 12th International Conference on Quality in Research (QIR 2013), June 25-28, 2013, Yogyakarta, Indonesia

Advances in materials, processing and manufacturing : selected, peer reviewed papers from the 12th International Conference on Quality in Research (QIR 2013), June 25-28, 2013, Yogyakarta, Indonesia

Selected, peer reviewed papers from the 13th International Conference on Quality in Research (QiR 2013), June 25-28, 2013, Yogyakarta, Indonesia
Print Book, English, 2013
Trans Tech Publ., Switzerland, 2013
Conference papers and proceedings
xiii, 560 pages : illustrations ; 25 cm
9783037857571, 3037857579
Editorial NoteChapter 1: Advanced and Composite MaterialsAtomic Layer Deposition of Inverse Opals for Solar Cell ApplicationsThe Influence of Various Percentage of Al2O3 by Using Vortex Method to Tensile Strength and the Distribution of Al2O3p CompositeModifications of Multi-Walled Carbon Nanotubes on Zinc Oxide Nanostructures for Carbon Monoxide (CO) Gas Sensitive LayerAn Investigation of Structure and Complex Impedance Behavior of Composite (1-X)BA0.5SR0.5FE11.7MN0.15TI0.15 /XLA0.7BA0.3MNO3Electrochemical Behavior of Li4Ti5O12 under In Situ Process of Sintering and Surface Coating with Cassava PowderSynthesis of Highly-Ordered TiO2 through CO2 Supercritical Extraction for Dye-Sensitized Solar Cell ApplicationDeformation Behaviour of Silicon Carbide Reinforced Al-7Si Composite after Balistic ImpactsHydrogen Absorpsivity-Desorbsivity of Mg Doped by Ni, Cu, Al Produced by Mechanical AlloyingCrystallite Growth Kinetics of BaFe12O19/SrTiO3 Based Composites Derived from Mechanical AlloyingCrystal Structures and Thermal Properties of Bamboo Nanofiber Reinforced-Composite Friction Materials of Glass and Metal WastesFormation and Characterization of MMCs Alloy Al-5%Cu-4%Mg/SiC(p) by Thixoforming ProcessStudy on PbSn Composites Produced by Powder Metallurgy as Core Bullet ProjectileElectroless Plating of Al2O3 Particles Reinforced CompositesSrTiO3 Thin Films Deposition Using Pulsed Laser Deposition TechniqueCrystallite Size Characterization of Mechanically Alloyed of (Ba,Sr) Hexaferrite and (Ba,Sr) Titanate Composite SystemNew Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite ComponentNanosize Effects on Magnetic Properties and Peak Shifting of X-Ray Diffraction Pattern of BaFe12O19 Produced by Sol Gel MethodQuasi-Solid State DSSC Performance Enhancement by Bilayer Mesoporous TiO2 Structure ModificationMicrostructure and Phase Analysis of La0.8Ba0.2TixMn(1-x)O3 System for Microwave Absorber Material (x = 0 – 0.7)Crystallographic Properties of Aluminum-Doped Barium Zirconium Titanate Thin Films by Sol Gel ProcessLead-Free Oxide Thin Films for Gas DetectionFabrication of Polymer Solar Cells on Flexible SubstrateMagnetic Behaviors of BaTiO3-BaFe12O19 Nanocomposite Prepared by Sol-Gel Process Based on Differences in Volume FractionSynthesis of Mesoporous Silica from Tetraethylorthosilicate by Using Sodium Ricinoleic as a Template and 3-Aminopropyltrimethoxysilane as Co-Structure Directing Agent with Volume Variation of Hydrochloric Acid 0.1 MOptimizing the Nanostructural Characteristics of Chemical Bath Deposition Derived ZnO Nanorods by Post-Hydrothermal TreatmentsEffect of CaO Dopant on the Dielectric Properties of NiONumerical Modeling of Ship Composite-Based on Aluminum Casting as Alternative Materials for Ship BuildingHigh Coverage ZnO Nanorods on ITO Substrates via Modified Chemical Bath Deposition (CBD) Method at Low TemperatureQuantum Approximation for Josephson's Tunneling in Thx DUO2 Nano Material for 535 Tesla at Muon CyclotronMicrostructural Characterisation and Microwave Absorption Characteristics of La(1-x)BaxFe0.25Mn0.5Ti0.25O3 (x = 0, 0.25, 0.75, 1)Performance of Natural Carotenoids from Musa aromatica and Citrus medica var Lemon as Photosensitizers for Dye-Sensitized Solar Cells with TiO2 NanoparticleSynthesis and Characterization of Nanocrystalline TiO2 by Non-Aqueous Sol-Gel in Acidic Condition for Dye-Sensitized Solar CellsRemoval of Heavy Metals from Aqueous Solution by Hydroxyapatite/Chitosan CompositePhotocatalytic Degradation of C.I. Reactive Red 2 by Using TiO2-Coated PET Plastic under Solar IrradiationSynthesis of SnO2 Nanostructure Thin Film and its Prospective as Gas SensorsPreliminary Observation on Macro Texture of Nb3Sn Low Temperature Superconductor (LTS)Characteristics of Heat Treated Al7Si-Mg-Zn - 5 wt.% SiC Squeeze Casted Composite with Variation of Mg Content for Tactical Vehicle ApplicationReduction of Nickel Ion Release on a TiO2 Coated onto an Orthodontic WireProperties of Fe-Mn-C Alloy as Degradable Biomaterials Candidate for Coronary StentSynthesis and Characterization of Silica-Lavender Microencapsulation by Sol Gel-Emulsion Method for Anti Mosquito TextileSensitive Layer Thickness Dependence on Microcantilever Sensor SensitivityBiocompatibility Improvement of NiTi Orthodontic Wire from Various CoatingsSynthesis and Characterization of Bacterial Cellulose-Based Carbon Nanotube by Catalytic GraphitizationSynthesis and Characterization of TiO2 Nanoparticle Using Starch as a Template by Sol-Gel Method for the Application of UV ProtectionBuilding Materials Composition Influence to Sound Transmission Loss (STL) ReductionContribution of Short Coconut Fiber to Pavement Skid ResistanceChapter 2: Polymer and CeramicsClassification of Ceramic Tiles by Identifying Defect on Ceramic Tile Surface Using Local Texture FeatureStructural Characterization of Mullite-Based Ceramic Material from Al2O3 and Silica Xerogel Converted from Sago Waste AshCorrelation of Normal Incidence Sound Absorption Coefficient (NAC) and Random Incidence Sound Absorption Coefficient (RAC) of Polyester/Ramie Fibre Composite MaterialsA Study on the Structure of Novel Polyurethanes Derived from γ-Valerolactone-Based Diol PrecursorsGrain Growth in Millimeter Wave Sintered Alumina CeramicsThe Dinamic Cyclic Trend Phenomena of Cement-Fly Ash Smart Concrete Compressive Strength and Resistivity in Various Composition of Polymer Carbon FiberPreparation of the Edible Biocomposite Film Gelatin/Bacterial Cellulose Microcrystal (BCMC): Variation of Matrix Concentration, Filler, and Sonication TimeSynthesis of Poly(1-vinyl-1,2,4-triazole) and Preparation of Proton Conducting Membrane for High Temperature OperationCharacteristics of Environmental Friendly Labeled Plastic Shopping Bags in IndonesiaChapter 3: Materials and Manufacturing ProcessesSKD 61 Material Surface Treatment with Electric Discharge Machining Using Cu, CuCr & Graphite Electrodes and Dielectric Fluid JatrophacurcasApplication of Shot Peening and Shot Blasting to Increase Hardness and Depth of Nitride Hardened Layer to the Modified H13 Steel as Die Casting Die MaterialsOptimization of Multiple Performance Characteristics in the Wire EDM Process of AISI D2 Tool Steel Using Taguchi and Fuzzy LogicCharacterization of Al-7Si-Mg-Cu Turbine Impeller Produced by Investment CastingResearch on the Manufacturing of Steam Turbine Blade by Using Investment Casting TechnologyMechanical Properties and Microstructure of Welded Dissimilar Metals Using Buttering & Non-Buttering LayerComparison of Commercially Pure Titanium Surface Hardness Improvement by Plasma Nitrocarburizing and Ion ImplantationEffect of Phenolic Resin and Alignment to the Quality of Prototype Composite Railway Brake BlocksEffects of Welding Parameters in Micro Friction Stir Lap Welding of Aluminum A1100Preparation of Uranium Nitride from Uranium Metal through by Hydriding and Nitriding ProcessSimulation of Metal Flow to Investigate the Application of Antilock Brake Mechanic System in Deep Drawing Process of CupEffect of Equal Channel Angular Pressing and Post Heating on Microstructure and Hardness of Cu-Zn 70/30Materials Selection in Appropriate Technology Four Focuses in Design ThinkingStudy about Surface Hardening on Local Disc Brakes with Direct Current Plasma Nitrocarburizing ApparatusThe Effect of Vertical Step Block Casting to Microstructure and Mechanical Properties in Producing Thin Wall Ductile IronResolving Individual Solute Levels of AA6061 through Multiple Sub-Ambient Temperatures Thermoelectric Power MeasurementsEffect of Rolling Direction to the Strength of a Thin-Walled Steel SHS Beam under Concentrated-Compressive Load and Bending MomentOptimization Design of Airfoil Propellers of Modified NACA 4415 Using Computational Fluids DynamicsAnalysis of Micro-Channels Manufacturing of Acrylic Using Low Power CO2 LaserThickness and Fiber Content Optimization in VARTM Method for High Speed CraftVane-Turbine as an Energy Conversion in the Propeller Slipstream of Single Screw ShipApplication of Al2O3 Nanofluid on Sintered Copper-Powder Vapor Chamber for Electronic CoolingReal-Time Monitoring System of Dieless Bellows Forming Using Machine VisionSpringback Prediction Compensation and Optimization for Front Side Member in Sheet Metal Forming Using FEM SimulationLow Speed Electric Machine Used for Electric Generating from Savonius WindmillPhysics and Chemistry Test on Aluminum-Based Composite Materials as an Alternative Material for the Manufacture of Brake DrumOxidation Characteristics of Various Nickel Composite Coated on Ferritic Stainless SteelChapter 4: Corrosion and Degradation of MaterialsHot Corrosion of Aluminized 1020 Steel with NaCl DepositImprovement of Stress Corrosion Resistance in Aluminum Alloy 7075 through Retrogression and Re-Aging ModificationBehavior of CO2 Corrosion of API 5L X52 Steel in NaCl Solution under Turbulent Flow ConditionEffectiveness of Myrmecodia Pendans Extract as Eco-Friendly Corrosion Inhibitor for Material API 5L Grade B in 3,5% NaCl SolutionInfluence of Intermetallic Inclusion to Brittle Fracture of Electric Motor Shaft AISI 1045 under Torsion LoadingHigh Temperature Oxidation Behavior of Co-Based Coating at 800o C as Alternative Coating Material for SOFC InterconnectContribution of Galvanizing Layer to Hydrogen Induced Cracking Failure of AISI 4140 Bolt for Padeye Fixing in Marine EnvironmentCorrosion Inhibitor Performance with Presence of FeCO3 Film in CO2 Corrosion Environment under Fluid Flow EffectCorrosion of Concrete Using Portland Composite Cement and Rice Husk Ash under Simulated Acid Rain EnvironmentChapter 5: Extraction of MaterialsThe Influence of Coal and Reduction Process Parameters in Producing Iron NuggetSulfuric Acid Leaching of Bangka Indonesia Ilmenite Ore and Ilmenite Decomposed by NaOHSubmerged Ultrafiltration for Minimizing Energy Process of Refinery Wastewater TreatmentAnatase TiO2 Enrichment from Bangka Ilmenite (FeTiO3) and its Photocatalytic Test on Degradation of Congo RedPractical Isolation of Bullatacin from Annona muricata Leaves Extract Using an Open Column Chromatography Technique